Asus A7N8X-E ACPI S3 resume hangs with 2.6.10 and 2.6.11-rc1
Hi,
I haven't tried any earlier kernel. Problem exists with 2.6.10 and 2.6.11-rc1. System seems to suspend ok. When I press the power button the fans turn on again, the IDE LED seems to flash a little and then stays on permanently. System hangs. Display is still off, so I don't know if there are any kernel messages. All I can do is hit the Reset button. S1 works fine.
Under WinXP S3 works.
Does anyone see the same problem ?
Mathias
This message has been 'sanitized'. This means that potentially dangerous content has been rewritten or removed. The following log describes which actions were taken.
Sanitizer (start="1106239356"):
Part (pos="1132"):
SanitizeFile (filename="unnamed.txt", mimetype="text/plain"):
Match (names="unnamed.txt", rule="9"):
Enforced policy: accept
Part (pos="1737"):
SanitizeFile (filename="lspci.out", mimetype="text/plain"):
Match (rule="default"):
Enforced policy: defang
Replaced mime type with: application/DEFANGED-13721 Replaced file name with: lspci_out.DEFANGED-13721
Total modifications so far: 1
Anomy 0.0.0 : Sanitizer.pm
$Id: Sanitizer.pm,v 1.83 2004/03/23 12:33:48 bre Exp $
Hi!
Quoted 10 lines
I haven't tried any earlier kernel. Problem exists with 2.6.10 and 2.6.11-rc1. System seems to suspend ok. When I press the power button the fans turn on again, the IDE LED seems to flash a little and then stays on permanently. System hangs. Display is still off, so I don't know if there are any kernel messages. All I can do is hit the Reset button. S1 works fine.
Under WinXP S3 works.
Does anyone see the same problem ?
Try older kernels then. And read Documentation/power/video.txt
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!