Skip to contentSkip to conversation

Debian Diskless client mounts FS as Read Only

DISCUSSION Bill Shupp 1 participant 2 messages Feb 2, 2005

Subsystems (2)
lore
Share & tools
lore

Bill Shupp

author
#0 lore raw

I am trying to setup a Debian Woody diskless client. I followed instructions located here to make it work with my PXE enabled 3com NIC:

http://zeewier.blub.net/~jdv/pxe-debian.html

Everything is working fine, except the root file system is still being mounted as read only, and I don't know why. Here's my entry in /etc/exports:

/nfsroot/webcam 192.168.1.31(no_root_squash,rw,sync)

Here's what's in /proc/fs/nfs/exports:

/nfsroot/webcam 192.168.1.31(rw,no_root_squash,sync,wdelay) # 192.168.1.31

The server is also Debian Woody, both using the 2.4.18 kernel (the client's kernel was compiled manually to avoid modules).

Here's what apt-get show nfs-common shows for the version:

Source: nfs-utils
Version: 1:1.0-2woody3

Lastly, here are the kernel boot parameters I'm using:

ip=dhcp nfsroot=192.168.1.1:/nfsroot/webcam root=/dev/nfs init=/sbin/init

Any advice is greatly appreciated!

Regards,

Bill Shupp

-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

author
#1 lore raw

Re: Debian Diskless client mounts FS as Read Only-fixed

Quoted 17 lines · Bill Shupp

I am trying to setup a Debian Woody diskless client. I followed instructions located here to make it work with my PXE enabled 3com NIC:

http://zeewier.blub.net/~jdv/pxe-debian.html

Everything is working fine, except the root file system is still being mounted as read only, and I don't know why. Here's my entry in /etc/exports:

/nfsroot/webcam 192.168.1.31(no_root_squash,rw,sync)

Here's what's in /proc/fs/nfs/exports:

/nfsroot/webcam 192.168.1.31(rw,no_root_squash,sync,wdelay) # 192.168.1.31

The server is also Debian Woody, both using the 2.4.18 kernel (the client's kernel was compiled manually to avoid modules).

Here's what apt-get show nfs-common shows for the version:

Quoted 8 lines

Source: nfs-utils
Version: 1:1.0-2woody3

Lastly, here are the kernel boot parameters I'm using:

ip=dhcp nfsroot=192.168.1.1:/nfsroot/webcam root=/dev/nfs init=/sbin/init

Any advice is greatly appreciated!

Sorry folks.. the debootstrap didn't setup the fstab in the client's etc directory (how could it?). Anyway, once I put the right entries in there, all is working well.

Thanks!

Bill

-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs