2.6.11-rc[234] setfont fails on i810 after resume from ACPI-S3
Quoted 25 lines · Pavel Machek
Hi!
Quoted 4 lines
Quoted 3 lines
Well, dumping random stuff to console can produce
funny results. I'd call that normal. Try cat/dev/urandom, that should be "enough random".Quoted 12 lines
I am also getting strange effects. I boot into 2.6.11-rc4 and the console fonts looks fine. Come back a day later and the console font has corrupt characters. E.g. Displays a "D" instead of an "L" and stuff like that. It is mostly readable, except for a few characters. It is only the local console that is corrupted. ssh into the box displays correct characters, so all I can assume is that the VGA console is being programmed with different characters. The bad characters also survive a soft reboot( During BIOS boot up), until the linux kernel starts booting, and then it switches to a good font.
I have seen something similar on S3 cards with bad video ram (we had
Quoted 2 lines
3 of them). If it survives soft reboot... well, that looks like
Quoted 6 lines
hardware problem to me. [We may do something bad in linux, too, but strange effects should not survive reboot, that's hw bug. I'd suggest memtest on video ram, but someone would need to write that tool, first].
Pavel
i810 uses system RAM (which was tested with memtest)
In my case, it also does work fine with 2.4.29, thus problem 2.6 specific.
Michael