Skip to contentSkip to conversation

i386 / sysenter safety test case

DISCUSSION Zachary Amsden 1 participant 1 message Mar 9, 2005

lore
Share & tools
lore
#0 lore raw

Code inspection of entry.S on i386 showed a potential problem - load through segment without verifying "flatness" on the sysenter path. Turns out this code is safe, but only by a thread ..

ENTRY(sysenter_entry)
movl TSS_sysenter_esp0(%esp),%esp
sysenter_past_esp:

       sti
       pushl $(__USER_DS)
       pushl %ebp
       pushfl
       pushl $(__USER_CS)
       pushl $SYSENTER_RETURN

/*
* Load the potential sixth argument from user stack.
* Careful about security.
*/

       cmpl $__PAGE_OFFSET-3,%ebp
       jae syscall_fault

1: movl (%ebp),%ebp

If it weren't for the fact that %ebp relative addresses default to using the SS segment, we could have loaded through a user segment here to read arbitrary memory (sysenter does nothing to DS segment). Perhaps this was considered before, but because of the implications, I thought this might be worth annotating in the source. Also provided a test case. Obviously only works on sysenter capable processors. Tested on 2.6.8.

Zach Amsden
[email protected]

#include <sys/syscall.h>

.text
.global sysenter_call
.global sysenter_call_2

/* void sysenter_call(pid_t pid, int signo, short ds, void *addr) */

sysenter_call:

	push %ebx
	push %edi
	push %ebp
        push %ds
	movl %esp, %edi
	movl 20(%esp), %ebx   /* pid */
	movl 24(%esp), %ecx   /* signo */
	movl 28(%esp), %ds    /* exploit DS */
	movl 32(%esp), %ebp
	movl %ebp, %esp
        push $sysenter_return
	push %ecx
	push %edx
	subl $16, %ebp
	push $0xbaadf00d
	movl $SYS_kill, %eax
	sysenter

/* vsyscall page will ret to us here */
sysenter_return:
mov %edi, %esp
pop %ds
pop %ebp
pop %edi
pop %ebx
ret

sysenter_call_2:

	push %ebx
	push %ebp
	movl 20(%esp), %ebx   /* pid */
	movl 24(%esp), %ecx   /* signo */
	movl 28(%esp), %ebp
	movl $SYS_kill, %eax
	sysenter

.data
test: .long 0

/*
* Copyright (c) 2005, Zachary Amsden ([email protected])
* This is licensed under the GPL.
*/

#include <stdio.h>
#include <signal.h>
#include <asm/ldt.h>
#include <asm/segment.h>
#include <sys/types.h>
#include <unistd.h>
#include <sys/mman.h>
#define __KERNEL__
#include <asm/page.h>

extern void sysenter_call(pid_t pid, int signo, short ds, void *addr); extern void sysenter_call_2(pid_t pid, int signo, void *addr); void catch_sig(int signo, struct sigcontext ctx)

{
	__asm__ __volatile__("mov %0, %%ds" : : "r" (__USER_DS));
	printf("interrupted %%ebp = 0x%x\n", ctx.ebp);
	if (ctx.ebp == 0xbaadf00d)
		printf("phew\n");
}

void main(void)

{
	struct user_desc desc;
	short ds;
	unsigned long addr;
	unsigned *stack;
	unsigned long offset;

	stack = (unsigned *)mmap(0, 4096, PROT_EXEC|PROT_READ|PROT_WRITE,
				 MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
	stack = &stack[1024];
	addr = 0xf0000; /* Try to read BIOS */
	offset = __PAGE_OFFSET-(unsigned)stack+addr+16;
	signal(SIGUSR1, catch_sig);
	desc.entry_number = 0;
	desc.base_addr = offset;
	desc.limit = 0xffffff;
	desc.seg_32bit = 1;
	desc.contents = MODIFY_LDT_CONTENTS_DATA;
	desc.read_exec_only = 0;
	desc.limit_in_pages = 1;
	desc.seg_not_present = 0;
	desc.useable = 1;
	if (modify_ldt(1, &desc, sizeof(desc)) != 0) {
		perror("modify_ldt");
	}
	ds = 0x7; /* TI | RPL 3 */
	sysenter_call(getpid(), SIGUSR1, ds, stack);
	sysenter_call_2(getpid(), SIGSTOP, __PAGE_OFFSET+4096);
	printf("not reached - core should show %%eax == -EFAULT\n");
}