Does the Trust BT180 (Broadcom 0x200a) work? and question on bnep0 device.

Bluez-users Lorenzo Ferrara 2 participants 2 messages Mar 14, 2005 Bluetooth drivers

lore

Share & tools

lore

Lorenzo Ferrara

author

2005-03-14 12:15 UTC #0 lore raw

Hello,

1) Does the Trust BT180 Class 1 Bluetooth Adapter work correctly, without loading any firmware?

2) I tried to configure my Adapter so I could run ifconfing bnep0 .... The only problem is that I don't have a bnep0 device. I read that I need at list 2 working computers with a bluetooth adapter (working) on both, and that I will have the bnep0 adapter only after I have run

pand --connect xx:xx:xx:xx:xx:xx --service GN

              |__SERVER ADDRESS_|

Is that true?

Here is some info, if you ned anything else please ask.

--------------------------------------------------------------------
Kernel info:
--------------------------------------------------------------------

I have compiled as module everything under
Device Drivers -> Networking support -> Bluetooth subsystem support

uname -a :
Linux port0 2.6.11 #3 Sat Mar 12 12:32:53 CET 2005 i686 GNU/Linux

--------------------------------------------------------------------

lsmod:

Module                  Size  Used by
hci_uart               15228  0
hci_vhci                5248  0
bcm203x                 5124  0
bnep                   12800  2
hidp                   12544  0
rfcomm                 35740  0
isofs                  32952  1
hci_usb                10888  2
udf                    85892  0
ppp_deflate             5120  0
zlib_deflate           21400  1 ppp_deflate
zlib_inflate           17408  2 isofs,ppp_deflate
bsd_comp                5632  0
ppp_async               9472  1
ppp_generic            22932  7 ppp_deflate,bsd_comp,ppp_async
slhc                    6912  1 ppp_generic
binfmt_misc             9096  1
l2cap                  23556  10 bnep,hidp,rfcomm
bluetooth              45060  11 hci_uart,hci_vhci,bnep,hidp,rfcomm,hci_usb,l2cap
powernow_k7             7464  0
cpufreq_userspace       3676  1
cpufreq_stats           4356  0
freq_table              3588  2 powernow_k7,cpufreq_stats
cpufreq_powersave       1664  0
cpufreq_ondemand        5404  0
thermal                11144  0
processor              18868  2 powernow_k7,thermal
fan                     3332  0
button                  5136  0
battery                 8452  0
ac                      3588  0
usbhid                 31424  0
via_rhine              20484  0
i2c_viapro              6800  0
i2c_core               18704  1 i2c_viapro
via_ircc               23572  0
irda                  119352  1 via_ircc
ehci_hcd               29192  0
uhci_hcd               29840  0
yenta_socket           19976  0
rsrc_nonstatic          9216  1 yenta_socket
pcmcia_core            42400  2 yenta_socket,rsrc_nonstatic
joydev                  8128  0
ntfs                  105968  1
ext2                   44292  1
radeon                 74624  1
drm                    60692  2 radeon
via_agp                 7680  1
agpgart                28712  2 drm,via_agp
parport_pc             25412  1
lp                      8900  0
parport                32840  2 parport_pc,lp
sr_mod                 14244  0

--------------------------------------------------------------------
This is the usb adapter:
--------------------------------------------------------------------

lsusb -v:

Bus 002 Device 005: ID 0a5c:200a Broadcom Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x0a5c Broadcom Corp.
idProduct 0x200a
bcdDevice 0.04

  iManufacturer           1 Broadcom
  iProduct                2 BCM92035DGROM
  iSerial                 3 000B0D6049E8
  bNumConfigurations      1

[...]

--------------------------------------------------------------------

cat /proc/bus/usb/devices:

T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0a5c ProdID=200a Rev= 0.04
S:  Manufacturer=Broadcom
S:  Product=BCM92035DGROM
S:  SerialNumber=000B0D6049E8
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=  32 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  32 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=  64 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  64 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=  64 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  64 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms

--------------------------------------------------------------------

hciconfig :

hci0: Type: USB

        BD Address: 00:0B:0D:60:49:E8 ACL MTU: 377:10  SCO MTU: 16:0
        UP RUNNING PSCAN ISCAN AUTH ENCRYPT
        RX bytes:338 acl:0 sco:0 events:48 errors:0
        TX bytes:1440 acl:0 sco:0 commands:46 errors:0

Signature · 20 lines

      ____________________________________________
     / Lorenzo Ferrara                           /\
    | lorenzo.ferrara <at> gmx <dot> it         |_/
    |___________________________________________|
    | www.lorenzoferrara.net                    |
    | www.aldebaransoftware.net                 |
    | www.pot-pourri.zzn.com                    |
 ___|________________________________________   |
 \___________________________________________\__/


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Marcel Holtmann

maintainer

2005-03-14 12:23 UTC #1 lore raw

Hi Lorenzo,

Quoted 2 lines

1) Does the Trust BT180 Class 1 Bluetooth Adapter work correctly, without loading any firmware?

it should work without loading any firmware.

Quoted 10 lines

2) I tried to configure my Adapter so I could run ifconfing bnep0 .... The only problem is that I don't have a bnep0 device. I read that I need at list 2 working computers with a bluetooth adapter (working) on both, and that I will have the bnep0 adapter only after I have run
pand --connect xx:xx:xx:xx:xx:xx --service GN
               |__SERVER ADDRESS_|
Is that true?

On one side you need "pand --connect" on the other "pand --listen".

Quoted 7 lines

hciconfig :

hci0: Type: USB

         BD Address: 00:0B:0D:60:49:E8 ACL MTU: 377:10  SCO MTU: 16:0
         UP RUNNING PSCAN ISCAN AUTH ENCRYPT
         RX bytes:338 acl:0 sco:0 events:48 errors:0
         TX bytes:1440 acl:0 sco:0 commands:46 errors:0

Don't use "auth" and "encrypt". Use the options of the pand server instead.

Regards

Marcel

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users