Skip to contentSkip to conversation

Resolved (sort of) No USB devices are being noticed

DISCUSSION Mark Healey 1 participant 1 message Mar 15, 2005

lore
Share & tools
lore
#0 lore raw
Quoted 30 lines · David Brownell
Quoted 17 lines · Mark Healey
Quoted 15 lines · David Brownell

On Friday 11 March 2005 12:36 am, Mark Healey wrote:

...

Quoted 8 lines

ohci_hcd 0000:00:01.2: remove, state 1 usb usb1: USB disconnect, address 1 ohci_hcd 0000:00:01.2: USB bus 1 deregistered ohci_hcd 0000:00:01.3: remove, state 1 usb usb2: USB disconnect, address 1 usb 2-1: USB disconnect, address 2 ohci_hcd 0000:00:01.3: USB bus 2 deregistered

Quoted 4 lines
Quoted 2 lines

So your boot code is first loading the HCDs, then unloading them. The problem is your boot scripts doing something remarkably bogus.

HCD?

As in "ohci_hcd". "Host Controller Driver", as described in the USB spec.

Quoted 6 lines
Quoted 1 line

How do I determine which script and fix it?

You could replace "rmmod" with a shell script that logged the relevant stuff ... like maybe saving "ps -ax --forest" output when the parameter is an HCD. Then work backwards from there.

From what I read on another site I tried

modprobe ohci_hcd

in

/etc/rc.local

and it works.

It's an ugly fix and whatever is wrong needs fixing but this will do for now.

Signature · 13 lines
Mark Healey
[email protected]


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id396&op=click
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel