mpc8560ads mtd map
PATCH 1/1 mpc8560ads mtd map
Add an MTD map for the flash on the mpc8560ads board.
drivers/mtd/maps/mpc85xxads.c new file +104 -0
@@ -0,0 +1,104 @@ +/* +* $Id$ +* +* Mapping for Motorola MPC85xxADS flash +* +* Greg Weeks <[email protected]> +* +* Copyright 2004 Timesys Corp. +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +*/ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/partitions.h> +#include <linux/config.h> +#include <asm/io.h> +#include <platforms/85xx/mpc85xx_ads_common.h> + +static struct mtd_info *flash; + +static struct map_info mpc85xxads_map = { + .name ="mpc85xxads-flash" , + .size =MPC85XXADS_FLASH_SIZE , + .bankwidth =4 , +}; + +static struct mtd_partition mpc85xxads_partitions[] = { + { + .name ="Linux JFFS2 Filesystem" , + .offset =0x0 , + .size =0x00800000 , + }, + { + .name ="Linux Kernel" , + .offset =0x00800000 , + .size =0x00200000 , + }, + { + .name ="Linux INITRD" , + .offset =0x00a00000 , + .size =0x00580000 , + }, + { + .name ="Bootloader" , + .offset =0x00f80000 , + .size =0x00080000 , + } +}; + +int __init mpc85xxads_map_init (void ) +{ +unsigned long mpc85xxads_flash_base =MPC85XXADS_FLASH_BASE ; + + mpc85xxads_map.phys = mpc85xxads_flash_base; + mpc85xxads_map.virt = (unsigned long )ioremap (mpc85xxads_flash_base, mpc85xxads_map.size); + +if (!mpc85xxads_map.virt) { +printk ("Failed to ioremap flash\n" ); +return -EIO ; + } + +simple_map_init (&mpc85xxads_map); + + flash =do_map_probe ("cfi_probe" , &mpc85xxads_map); +if (flash) { + flash->owner =THIS_MODULE ; +add_mtd_partitions (flash, mpc85xxads_partitions, +ARRAY_SIZE (mpc85xxads_partitions)); + }else { +iounmap ((void *)mpc85xxads_map.virt); +printk ("map probe failed for flash\n" ); +return -ENXIO ; + } + +return 0 ; +} + +static void __exit mpc85xxads_map_exit(void) +{ +if (flash) { +del_mtd_partitions (flash); +map_destroy (flash); + } + +if (mpc85xxads_map.virt) { +iounmap ((void *)mpc85xxads_map.virt); + mpc85xxads_map.virt =0 ; + } +} + +module_init (mpc85xxads_map_init); +module_exit (mpc85xxads_map_exit); + +MODULE_LICENSE ("GPL" ); +MODULE_AUTHOR ("Greg Weeks <[email protected]>" ); +MODULE_DESCRIPTION ("MTD map and partitions for Motorola MPC85xxADS" );
--- ppc-mpc8560ads/arch/ppc/platforms/85xx/mpc85xx_ads_common.h-orig +++ ppc-mpc8560ads/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
@@ -47,4 +47,7 @@
#define MPC85XX_PCI1_IO_SIZE 0x01000000
+#define MPC85XXADS_FLASH_BASE 0xff000000
+#define MPC85XXADS_FLASH_SIZE 0x01000000
+
#endif /* __MACH_MPC85XX_ADS_H__ */
--- ppc-mpc8560ads/drivers/mtd/maps/Kconfig-orig
+++ ppc-mpc8560ads/drivers/mtd/maps/Kconfig
@@ -667,5 +667,12 @@
help
This enables access to the flash chip on the Sharp SL Series
of PDAs.
+config MTD_MPC85XXADS
+ tristate "Flash device mapped on the MPC85XXADS board" + depends on MTD_CFI && MTD_CFI_INTELEXT && MTD_PARTITIONS && MPC8560_ADS + help
+ This enables access to the Flash on the MPC85xxADS boards.
+ If you have such a board, say 'Y'.
+
endmenu
--- ppc-mpc8560ads/drivers/mtd/maps/Makefile-orig
+++ ppc-mpc8560ads/drivers/mtd/maps/Makefile
@@ -72,3 +72,4 @@
obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o obj-$(CONFIG_MTD_DMV182) += dmv182.o obj-$(CONFIG_MTD_SHARP_SL) += sharpsl-flash.o
+obj-$(CONFIG_MTD_MPC85XXADS) += mpc85xxads.o
Quoted 4 lines · Greg Weeks
Add an MTD map for the flash on the mpc8560ads board.
Signed-off-by Greg Weeks <[email protected]>
<snip>
Most of the code in this patch can be eliminated if you set up the table in your platform file and use the proper CONFIG_MTD_xxx options.
Mark
Quoted 9 lines · Mark A. Greer
Quoted 4 lines · Greg Weeks
Add an MTD map for the flash on the mpc8560ads board.
Signed-off-by Greg Weeks <[email protected]>
Quoted 6 lines
<snip>
Most of the code in this patch can be eliminated if you set up the table in your platform file and use the proper
CONFIG_MTD_xxxoptions.Mark
Yep, I pulled this off our 2.6.4 kernel tree. I think it should be in the platform code, but I've not tried moving it yet. That should get rid of the map file and the Kconfig changes to support it.
Greg Weeks