Skip to contentSkip to conversation

Intel MB + P4 HT: bios processors logo depends on what?

DISCUSSION Indrek Kruusa 1 participant 2 messages Mar 25, 2005

lore
Share & tools
lore
#0 lore raw

A bit silly point maybe but it is somewhat interesting what makes BIOS on Intel motherboard decide which processor's logo to display.

Situation:

a) Fedora Core 4 test1 + kernel-2.6.11-1.1177_FC4smp
- going to reboot from fedora the bios shows always processors logo with HT marks

b) Mandrake 10.2 rc1 + kernel-2.6.11-5mdksmp
- after reboot there is processor logo without HT marks

c) Mandrake + kernel-2.6.12-rc1-mm1 (compiled with SMP+SMT)
- same as b)

There is nothing wrong with those kernels but it is interesting why Fedora's kernel (acpi daemon?) is somewhat special here.

thanks,
Indrek

#1 lore raw
Quoted 8 lines · Indrek Kruusa

A bit silly point maybe but it is somewhat interesting what makes BIOS on Intel motherboard decide which processor's logo to display.

Situation:

a) Fedora Core 4 test1 + kernel-2.6.11-1.1177_FC4smp
- going to reboot from fedora the bios shows always processors logo with HT marks

Quoted 8 lines

b) Mandrake 10.2 rc1 + kernel-2.6.11-5mdksmp
- after reboot there is processor logo without HT marks

c) Mandrake + kernel-2.6.12-rc1-mm1 (compiled with SMP+SMT)
- same as b)

There is nothing wrong with those kernels but it is interesting why Fedora's kernel (acpi daemon?) is somewhat special here.

There was missing d) Fedora + kernel-2.6.12-rc1-mm1 :) And bios shows that I have hyperthreading processor.

It is difference between distros not kernels.

Indrek