Skip to contentSkip to conversation

Raid1 problem can't add remove or mark faulty -- it did work

DISCUSSION rrk 2 participants 3 messages Mar 27, 2005 MD RAID

lore
Share & tools
lore

rrk

author
#0 lore raw

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ mdstat after reboot

root@crm_svr:~# cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid5] [multipath] [raid6] [raid10]
md0 : active raid1 hdc1[1]
     155268096 blocks [2/1] [_U]

unused devices: <none>

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ the below error shows after a boot when excuted in kde konsole

root@crm_svr:/home/rob# mdadm /dev/md0 -a /dev/hda1
mdadm: hot add failed for /dev/hda1: Invalid argument

but this error is shown from a tty console

md: could not bd_claim hda1
md: error, md_import_device() returned -16
mdadm: hot add failed for /dev/hda1 : invalid argument

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ this is what shows in dmesg

md: could not bd_claim hda1.
md: error, md_import_device() returned -16
md: could not bd_claim hda1.
md: error, md_import_device() returned -16
md: could not bd_claim hda1.
md: error, md_import_device() returned -16

i had this bd_claim error when i first tried to build the array but it went away when i wiped every thing and started over this box is the only time i have seen this error and i tried using different drives -- but of the same type -- when the problem showed up on the initial build

#1 lore raw

I am not sure what bd_claim is, but it is somewhat like open(). My guess is your disk is in use, maybe nounted. Run this command and send the output.

df

Guy

Quoted 53 lines

-----Original Message-----
From: [email protected] [mailto:linux-raid- [email protected]] On Behalf Of rrk
Sent: Sunday, March 27, 2005 1:38 PM
To: [email protected]
Subject: Raid1 problem can't add remove or mark faulty -- it did work

(quoted diff) +0 -0
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

mdstat after reboot

root@crm_svr:~# cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid5] [multipath] [raid6]
[raid10]
md0 : active raid1 hdc1[1]
      155268096 blocks [2/1] [_U]

unused devices: <none>

(quoted diff) +0 -0
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

the below error shows after a boot when excuted in kde konsole

root@crm_svr:/home/rob# mdadm /dev/md0 -a /dev/hda1
mdadm: hot add failed for /dev/hda1: Invalid argument

but this error is shown from a tty console

md: could not bd_claim hda1
md: error, md_import_device() returned -16
mdadm: hot add failed for /dev/hda1 : invalid argument

(quoted diff) +0 -0
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

this is what shows in dmesg

md: could not bd_claim hda1.
md: error, md_import_device() returned -16
md: could not bd_claim hda1.
md: error, md_import_device() returned -16
md: could not bd_claim hda1.
md: error, md_import_device() returned -16

i had this bd_claim error when i first tried to build the array but it went away when i wiped every thing and started over this box is the only time i have seen this error and i tried using different drives -- but of the same type -- when the problem showed up on the initial build

-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#2 lore raw
Quoted 9 lines · Guy

I am not sure what bd_claim is, but it is somewhat like open(). My guess is your disk is in use, maybe nounted. Run this command and send the output.

df

Guy

yep that was it -- there is a whizzing wizard somewhere it is not fstab-- though i checked that sorry for the trouble and thanks
rob

Quoted 66 lines
Quoted 51 lines

-----Original Message-----
From: [email protected] [mailto:linux-raid- [email protected]] On Behalf Of rrk
Sent: Sunday, March 27, 2005 1:38 PM
To: [email protected]
Subject: Raid1 problem can't add remove or mark faulty -- it did work

(quoted diff) +0 -0
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

mdstat after reboot

root@crm_svr:~# cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid5] [multipath] [raid6]
[raid10]
md0 : active raid1 hdc1[1]
     155268096 blocks [2/1] [_U]

unused devices: <none>

(quoted diff) +0 -0
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

the below error shows after a boot when excuted in kde konsole

root@crm_svr:/home/rob# mdadm /dev/md0 -a /dev/hda1
mdadm: hot add failed for /dev/hda1: Invalid argument

but this error is shown from a tty console

md: could not bd_claim hda1
md: error, md_import_device() returned -16
mdadm: hot add failed for /dev/hda1 : invalid argument

(quoted diff) +0 -0
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

this is what shows in dmesg

md: could not bd_claim hda1.
md: error, md_import_device() returned -16
md: could not bd_claim hda1.
md: error, md_import_device() returned -16
md: could not bd_claim hda1.
md: error, md_import_device() returned -16

i had this bd_claim error when i first tried to build the array but it went away when i wiped every thing and started over this box is the only time i have seen this error and i tried using different drives -- but of the same type -- when the problem showed up on the initial build

Quoted 6 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html