How to debug kernel before there is no printk mechanism?
Hi all,
How can one debug kernel before there is no printk mechanism in kernel.
Regards,
Krishna Chaitanya
Quoted 6 lines · krishna
Hi all,
How can one debug kernel before there is no printk mechanism in kernel.
Regards,
Krishna Chaitanya
Write directly to screen memory at 0x000b8000, or write to the RS-232C UART while polling the TX buf empty bit, or just write bits that mean something to you out the printer port.
Screen - memory is 16-bit words with the high-word being an attibute byte. FYI 0x07 is a good B&W byte. You can initialize a pointer to it as:
unsigned short *screen = 0xc00b8000; Since low memory is always mapped, the above cheat will work. The 0xc0000000 is PAGE_OFFSET.
An early '486 was brought up into a 32-bit protected-mode (non linux) operating system using these debugging methods. The first time I got to see some symbol written to the screen in protected-mode marked the start of a week-end- long party. Have fun!
Cheers,
Dick Johnson
Penguin : Linux version 2.6.11 on an i686 machine (5537.79 BogoMips).
Notice : All mail here is now cached for review by Dictator Bush.
98.36% of all statistics are fiction.
Video memory is at b800:0000, for humans 0x0000b800, not at 0x000b8000
Quoted 36 lines · linux-os
Quoted 6 lines · krishna
Hi all,
How can one debug kernel before there is no printk mechanism in kernel.
Regards,
Krishna ChaitanyaWrite directly to screen memory at
0x000b8000, or write to the RS-232C UART while polling the TX buf empty bit, or just write bits that mean something to you out the printer port.Screen - memory is 16-bit words with the high-word being an attibute byte. FYI
0x07is a good B&W byte. You can initialize a pointer to it as:unsigned short *screen =
0xc00b8000; Since low memory is always mapped, the above cheat will work. The0xc0000000isPAGE_OFFSET.An early '486 was brought up into a 32-bit protected-mode (non linux) operating system using these debugging methods. The first time I got to see some symbol written to the screen in protected-mode marked the start of a week-end- long party. Have fun!
Cheers,
Dick Johnson
Penguin : Linux version 2.6.11 on an i686 machine (5537.79 BogoMips).
Notice : All mail here is now cached for review by Dictator Bush.
98.36% of all statistics are fiction.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 2 lines · Vicente Feito
Video memory is at b800:0000, for humans
0x0000b800, not at0x000b8000
Wrong. "real-mode" can use a segment address of b800, that doesn't work in protected mode. A segment address of b800:0000 is never under any conditions 0000b800.
FYI, a real-mode segment is a 16-byte entity, therefore there are many segment:offset combinations that can get you to 0x000b8000.
Quoted 28 lines · linux-os
Quoted 26 lines · krishna
Quoted 6 lines
Hi all,
How can one debug kernel before there is no printk mechanism in kernel.
Regards,
Krishna ChaitanyaWrite directly to screen memory at
0x000b8000, or write to the RS-232C UART while polling the TX buf empty bit, or just write bits that mean something to you out the printer port.Screen - memory is 16-bit words with the high-word being an attibute byte. FYI
0x07is a good B&W byte. You can initialize a pointer to it as:unsigned short *screen =
0xc00b8000; Since low memory is always mapped, the above cheat will work. The0xc0000000isPAGE_OFFSET.An early '486 was brought up into a 32-bit protected-mode (non linux) operating system using these debugging methods. The first time I got to see some symbol written to the screen in protected-mode marked the start of a week-end- long party. Have fun!
Quoted 11 lines
Quoted 10 lines
Cheers,
Dick Johnson
Penguin : Linux version 2.6.11 on an i686 machine (5537.79 BogoMips).
Notice : All mail here is now cached for review by Dictator Bush.
98.36% of all statistics are fiction.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Cheers,
Dick Johnson
Penguin : Linux version 2.6.11 on an i686 machine (5537.79 BogoMips).
Notice : All mail here is now cached for review by Dictator Bush.
98.36% of all statistics are fiction.
Quoted 6 lines · linux-os
Quoted 1 line · Vicente Feito
Video memory is at b800:0000, for humans
0x0000b800, not at0x000b8000Wrong. "real-mode" can use a segment address of b800, that doesn't work in protected mode. A segment address of b800:0000 is never under any conditions
0000b800.
I was referring to the basic conditions, haven't played under protected mode with that, only in real mode, I assumed the question was under that mode. What you mean is this:
B800:0010 -> B8010H right?
Quoted 3 lines
FYI, a real-mode segment is a 16-byte entity, therefore there are many segment:offset combinations that can get you to
0x000b8000.
I'm aware of that, it has nothing to do with my statement.
Quoted 44 lines
Quoted 28 lines · linux-os
Quoted 26 lines · krishna
Quoted 6 lines
Hi all,
How can one debug kernel before there is no printk mechanism in kernel.
Regards,
Krishna ChaitanyaWrite directly to screen memory at
0x000b8000, or write to the RS-232C UART while polling the TX buf empty bit, or just write bits that mean something to you out the printer port.Screen - memory is 16-bit words with the high-word being an attibute byte. FYI
0x07is a good B&W byte. You can initialize a pointer to it as:unsigned short *screen =
0xc00b8000; Since low memory is always mapped, the above cheat will work. The0xc0000000isPAGE_OFFSET.An early '486 was brought up into a 32-bit protected-mode (non linux) operating system using these debugging methods. The first time I got to see some symbol written to the screen in protected-mode marked the start of a week-end- long party. Have fun!
Quoted 10 lines
Quoted 10 lines
Cheers,
Dick Johnson
Penguin : Linux version 2.6.11 on an i686 machine (5537.79 BogoMips).
Notice : All mail here is now cached for review by Dictator Bush.
98.36% of all statistics are fiction.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/Cheers,
Dick Johnson
Penguin : Linux version 2.6.11 on an i686 machine (5537.79 BogoMips).
Notice : All mail here is now cached for review by Dictator Bush.
98.36% of all statistics are fiction.
Quoted 4 lines · Vicente Feito
Quoted 3 lines · linux-os
Quoted 1 line · Vicente Feito
Video memory is at b800:0000, for humans
0x0000b800, not at0x000b8000
Quoted 8 lines
Quoted 3 lines
Wrong. "real-mode" can use a segment address of b800, that doesn't work in protected mode. A segment address of b800:0000 is never under any conditions
0000b800.I was referring to the basic conditions, haven't played under protected mode with that, only in real mode, I assumed the question was under that mode. What you mean is this:
B800:0010 -> B8010H right?
Sort of, but incomplete....
The real-mode segment is a 16-byte thing:
0001:0000 = 0x00000010 0002:0000 = 0x00000020 0003:0000 = 0x00000030
b801:0000 = 0x000B8010 b802:0000 = 0x000B8020 b803:0000 = 0x000B8030
To get the physical address, you multiply the segment by 0x10 and add the offset. To access these in 32-bit "linear" mode, you use the address on the right. To access these in paged- mode on Linux, you OR in PAGE_OFFSET. This is an artifact of how the low-memory page-tables were written. It is not the "correct" way. There are macros available to perform the translation for you if you are making some driver that needs to work over many kernel versions.
[SNIPPED]
Cheers,
Dick Johnson
Penguin : Linux version 2.6.11 on an i686 machine (5537.79 BogoMips).
Notice : All mail here is now cached for review by Dictator Bush.
98.36% of all statistics are fiction.
Quoted 8 lines · linux-os
Quoted 6 lines · krishna
Hi all,
How can one debug kernel before there is no printk mechanism in kernel.
Regards,
Krishna Chaitanya
Here's an implementation by Keith Owens:
http://kernelnewbies.org/documents/videochar.txt
The patch there is to Linux 2.4.18, but should be workable on many versions.
Quoted 17 lines
Write directly to screen memory at
0x000b8000, or write to the RS-232C UART while polling the TX buf empty bit, or just write bits that mean something to you out the printer port.Screen - memory is 16-bit words with the high-word being an attibute byte. FYI
0x07is a good B&W byte. You can initialize a pointer to it as:unsigned short *screen =
0xc00b8000; Since low memory is always mapped, the above cheat will work. The0xc0000000isPAGE_OFFSET.An early '486 was brought up into a 32-bit protected-mode (non linux) operating system using these debugging methods. The first time I got to see some symbol written to the screen in protected-mode marked the start of a week-end- long party. Have fun!
Signature · 1 line
~Randy
Did you try turning on CONFIG_EARLY_PRINTK=y? That will allow printk to a serial console much earlier.
You need to build the serial driver in too:CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=y
Signature · 2 lines
Jon Smirl [email protected]