Routing Load balancing and traffic shaping through 2
Quoted 2 lines · Joao Carneiro - DLS
I have a couple of internet links: a leased line of 256kbit/s and an ADSL line of 1024kbit/s.
What is the upload speed of your ADSL line? ...and the leased line is symmetric, right; i.e. 256kbit down and 256kbit up?
Quoted 1 line
What kernel is the most appropriate for this job?
Having used both 2.4.x and 2.6.x on a very busy router doing that sort of thing, I would say that they are equal for the task in terms of stability. Other people's opinions will vary. :) Most new development is for 2.6 these days, so I'd say go with 2.6.
Quoted 3 lines
By reading the howto I found one example that's clearly what I have:
http://lartc.org/howto/lartc.rpdb.multiple-links.html
Since you have two very dissimilar lines, I would tentatively recommend routing traffic based upon your users' needs for bandwidth and latency. Without knowing what kind of users you have I can't recommend anything, but I can loosely describe a setup I used to administrate.
ADSL line: 6000kbit down, 600kbit up
- local web browsing/downloads
- local streaming video viewing
SDSL line: 1300kbit up, 1300kbit down
* high priority, low bandwidth queue
- internet games
* medium priority, high bandwidth queue
- incoming connections to our servers
- ssh
- email
* low priority, any-remaining bandwidth queue
- p2p traffic
- unrecognized traffic
* lowest priority, almost no bandwidth queue
- bofh :-)
Your setup is different and your users probably have different usage patterns, but there's a lot of flexibility in this general approach. If you provide more details I may be able to help further.
-Corey
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc