Skip to contentSkip to conversation

REPOST [Followup: PROBLEM: Kernel bug at tg3.c:2456]

DISCUSSION Sergio Chiesa 1 participant 1 message Apr 6, 2005

lore
Share & tools
lore
#0 lore raw

up :-D

-------- Original Message --------
Subject: Followup: PROBLEM: Kernel bug at tg3.c:2456
Date: Thu, 31 Mar 2005 14:34:22 +0200
From: Sergio Chiesa <[email protected]>
To: [email protected]
References: <[email protected]>

Quoted 6 lines · Sergio Chiesa

7.7.
Well, it seems that with the original onboard raid controller the bug didn't trigger... the controller was swapped with the lsi logic by my supplier because it fails badly with raid-5 arrays (hw/fw related issue) I also tried the original broadcom driver version 7.3.5 with similar results...

I made some tests again, switching back to the onboard dual aic7902 scsi controller (non raid) the tg3 dont hung anymore.
I just noticed the IRQ mappings change between the two settings. The Broadcom eth get always the IRQ #25, the two onboard scsi controllers get #24 and #25 (shared with the eth, is it harmful??) but the megaraid driver gets the IRQ #28

I think it is something IRQ related because if the eth hungs but the kernel is still running I see more than 140000 irq per second with "vmstat".

Hope it helps better!

Sergioc.