Skip to contentSkip to conversation

Remove redundancy from i2c-core.c

PATCH New Corey Minyard 1 participant 1 message Apr 6, 2005 I2C

lore
Share & tools
lore

Corey Minyard

author
#0 lore raw

PATCH 1/1 Remove redundancy from i2c-core.c

Call i2c_transfer() from i2c_master_send() and i2c_master_recv() to avoid the redundant code that was in all three functions. It also removes unnecessary debug statements as suggested by Jean Delvare.

This is important for the non-blocking interfaces because they will have to handle a non-blocking interface in this area. Having it in one place greatly simplifies the changes.

Signed-off-by Corey Minyard <[email protected]>
drivers/i2c/i2c-core.c +22 -44
Index: linux-2.6.12-rc1/drivers/i2c/i2c-core.c
===================================================================
@@ -612,27 +612,17 @@
 	struct i2c_adapter *adap=client->adapter;
 	struct i2c_msg msg;
 
-	if (client->adapter->algo->master_xfer) {
-		msg.addr   = client->addr;
-		msg.flags = client->flags & I2C_M_TEN;
-		msg.len = count;
-		msg.buf = (char *)buf;
+	msg.addr   = client->addr;
+	msg.flags = client->flags & I2C_M_TEN;
+	msg.len = count;
+	msg.buf = (char *)buf;
 	
-		dev_dbg(&client->adapter->dev, "master_send: writing %d bytes.\n",
-			count);
-	
-		down(&adap->bus_lock);
-		ret = adap->algo->master_xfer(adap,&msg,1);
-		up(&adap->bus_lock);
-
-		/* if everything went ok (i.e. 1 msg transmitted), return #bytes
-		 * transmitted, else error code.
-		 */
-		return (ret == 1 )? count : ret;
-	} else {
-		dev_err(&client->adapter->dev, "I2C level transfers not supported\n");
-		return -ENOSYS;
-	}
+	ret = i2c_transfer(adap, &msg, 1);
+
+	/* if everything went ok (i.e. 1 msg transmitted), return #bytes
+	 * transmitted, else error code.
+	 */
+	return (ret == 1 )? count : ret;
 }
 
 int i2c_master_recv(struct i2c_client *client, char *buf ,int count)

@@ -640,31 +630,19 @@
 	struct i2c_adapter *adap=client->adapter;
 	struct i2c_msg msg;
 	int ret;
-	if (client->adapter->algo->master_xfer) {
-		msg.addr   = client->addr;
-		msg.flags = client->flags & I2C_M_TEN;
-		msg.flags |= I2C_M_RD;
-		msg.len = count;
-		msg.buf = buf;
 
-		dev_dbg(&client->adapter->dev, "master_recv: reading %d bytes.\n",
-			count);
-	
-		down(&adap->bus_lock);
-		ret = adap->algo->master_xfer(adap,&msg,1);
-		up(&adap->bus_lock);
-	
-		dev_dbg(&client->adapter->dev, "master_recv: return:%d (count:%d, addr:0x%02x)\n",
-			ret, count, client->addr);
-	
-		/* if everything went ok (i.e. 1 msg transmitted), return #bytes
-	 	* transmitted, else error code.
-	 	*/
-		return (ret == 1 )? count : ret;
-	} else {
-		dev_err(&client->adapter->dev, "I2C level transfers not supported\n");
-		return -ENOSYS;
-	}
+	msg.addr   = client->addr;
+	msg.flags = client->flags & I2C_M_TEN;
+	msg.flags |= I2C_M_RD;
+	msg.len = count;
+	msg.buf = buf;
+
+	ret = i2c_transfer(adap, &msg, 1);
+
+	/* if everything went ok (i.e. 1 msg transmitted), return #bytes
+	 * transmitted, else error code.
+	 */
+	return (ret == 1 )? count : ret;
 }