HTB + speed a bit lower than what shaped to
Hi Guys,
I have a little problem i dont understand why its happening, Initially i thought it was a network problem, but then i made a crossover between me and the server and shaped on that interface with as minimal as possible config
this my test:
$TC qdisc add dev $INTERFACE root handle 1: htb default 30 $TC class add dev $INTERFACE parent 1: classid 1:1 htb rate 10Mbit
# POOL1
$TC class add dev $INTERFACE parent 1:1 classid 1:2 htb rate 512Kbit ceil 512Kbit prio 0
# DEFAULT
$TC class add dev $INTERFACE parent 1:1 classid 1:30 htb rate 10Mbit ceil 10Mbit prio 3
# MAILSERVER
$TC class add dev $INTERFACE parent 1:1 classid 1:12 htb rate 32Kbit ceil 32Kbit prio 0
$TC qdisc add dev $INTERFACE parent 1:30 handle 30: sfq perturb 10 $TC qdisc add dev $INTERFACE parent 1:12 handle 12: sfq perturb 10
# dev eth1 - creating filters with marked packets
$TC filter add dev $INTERFACE parent 1:0 protocol ip handle 12 fw classid 1:12
$TC filter add dev $INTERFACE parent 1:0 protocol ip handle 30 fw classid 1:30
iptables -t mangle -A POSTROUTING -d 192.168.2.1/32 -j MARK --set-mark 12 iptables -t mangle -A POSTROUTING -d 192.168.2.1/32 -p tcp --sport 22 -j MARK --set-mark 30
This all goes into the right classes, but when i do a download from the mailserver, im suppose to get 4Kb, and it starts at 5Kb , which is burst, and then move down towards 4kb then 3kb and stays around there, but never goes to 4 on the dot.
Is this normal or should it be perfectly 4Kb/s ?
Am i doing something wrong?
Thanks
Jandre
Signature · 14 lines
Regards Jandre "Some people are alive only because it is illegal to kill them." _____________________________________________________ _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Hi Jandre Olivier,
1. although the rate is 32Kbit, the ceil is also 32Kbit; you will get very close 32Kbit, but no more that 32Kbit.
2. The kernel calculates rate based on the packet size, not payload length. But your client, calculates rate based on the payload length.
If the traffic pattern is mainly small packet size, you will notice a much lower rate.
Quoted 68 lines · Jandre Olivier
Hi Guys,
I have a little problem i dont understand why its happening, Initially i thought it was a network problem, but then i made a crossover between me and the server and shaped on that interface with as minimal as possible config
this my test:
$TC qdisc add dev $INTERFACE root handle 1: htb default 30 $TC class add dev $INTERFACE parent 1: classid 1:1 htb rate 10Mbit# POOL1
$TC class add dev $INTERFACE parent 1:1 classid 1:2 htb rate 512Kbit ceil 512Kbit prio 0# DEFAULT
$TC class add dev $INTERFACE parent 1:1 classid 1:30 htb rate 10Mbit ceil 10Mbit prio 3# MAILSERVER
$TC class add dev $INTERFACE parent 1:1 classid 1:12 htb rate 32Kbit ceil 32Kbit prio 0$TC qdisc add dev $INTERFACE parent 1:30 handle 30: sfq perturb 10 $TC qdisc add dev $INTERFACE parent 1:12 handle 12: sfq perturb 10
# dev eth1 - creating filters with marked packets$TC filter add dev $INTERFACE parent 1:0 protocol ip handle 12 fw classid 1:12
$TC filter add dev $INTERFACE parent 1:0 protocol ip handle 30 fw classid 1:30iptables -t mangle -A POSTROUTING -d 192.168.2.1/32 -j MARK --set-mark 12 iptables -t mangle -A POSTROUTING -d 192.168.2.1/32 -p tcp --sport 22 -j MARK --set-mark 30
This all goes into the right classes, but when i do a download from the mailserver, im suppose to get 4Kb, and it starts at 5Kb , which is burst, and then move down towards 4kb then 3kb and stays around there, but never goes to 4 on the dot.
Is this normal or should it be perfectly 4Kb/s ?
Am i doing something wrong?
Thanks
Jandre
Signature · 14 lines
Regards Jandre "Some people are alive only because it is illegal to kill them." _____________________________________________________ _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Signature · 6 lines
lark _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc