Skip to contentSkip to conversation

Linux Alpha port: kernel panik under moderate DISK IO conditions

DISCUSSION Richard Henderson 4 participants 8 messages Apr 8, 2005 – Apr 28, 2005 1 message not in the archive

lore
Share & tools
lore
#1 lore raw
In reply to a message not in the archive
Quoted 3 lines · Rao Davide

My name is David Rao and I have an old alpha DS10 ds10 (ev6 Tsunami-webbrick cpu) with internal HDU on a LSI controller and external HSZ80 storage attached to a Qlogic.

Well, the CONFIG_SCSI_QLOGIC_ISP driver isn't supported, and you may have noticed prints big warning messages when you boot with it.

Fortunately, the CONFIG_SCSI_QLOGIC_1280 driver has been extended to handle the 1020 and 1040 devices. I've been using that for a while now on my ds10.

r~

#2 lore raw

I'm not using the qlogic controller as boot controller. I'm mooting from the internal disk connected to LSI controller. In any case I'll try out the suggested 1280 right now.

Can I build a modular kernel with the 2.6 kernel series ? I would find it handy to have som parts colpiled as modules.

--
Regards
Davide Rao
Client/server Unix
Atos Origin
Via C.Viola - Pont St. Martin (AO) Italy

  Cell :  +39 3357599151
  Tel  :  +39 125810433
  Email:  [email protected]
Quoted 14 lines · Richard Henderson
Quoted 1 line · Rao Davide

My name is David Rao and I have an old alpha DS10 ds10 (ev6 Tsunami-webbrick cpu) with internal HDU on a LSI controller and external HSZ80 storage attached to a Qlogic.

Well, the CONFIG_SCSI_QLOGIC_ISP driver isn't supported, and you may have noticed prints big warning messages when you boot with it.

Fortunately, the CONFIG_SCSI_QLOGIC_1280 driver has been extended to handle the 1020 and 1040 devices. I've been using that for a while now on my ds10.

r~

#3 lore raw

Linux Alpha port: LVM

Is LVM working on the alpha port 2.6 kernel series ?
If so where do I get libdevmapper so that I can build the userspace LVM utils ?

I tryied downloading ftp://sources.redhat.com/pub/dm/multipath-toolsmultipath-tools-0.4.3.tar.bz2 But I fail to compile it so I'm also unable tu build the userspace lvm utils.

--
Regards
Davide Rao
Client/server Unix
Atos Origin
Via C.Viola - Pont St. Martin (AO) Italy

  Cell :  +39 3357599151
  Tel  :  +39 125810433
  Email:  [email protected]
#4 lore raw

Re: Linux Alpha port: LVM

Quoted 1 line · Rao Davide

Is LVM working on the alpha port 2.6 kernel series ?

I have no idea. I've no use for the thing myself.

r~

#5 lore raw

Re: Linux Alpha port: LVM

In reply to Rao Davide
Quoted 1 line · Rao Davide

Is LVM working on the alpha port 2.6 kernel series ?

Works for me.

Quoted 2 lines

If so where do I get libdevmapper so that I can build the userspace LVM utils ?

Same place as you'd get it for any other system. Doesn't your distribution include it?

Signature · 2 lines
Måns Rullgård
[email protected]
#6 lore raw

Re: Linux Alpha port: LVM

In reply to Rao Davide
Quoted 1 line · Rao Davide

Is LVM working on the alpha port 2.6 kernel series ?

works fine for me.

Quoted 5 lines

If so where do I get libdevmapper so that I can build the userspace LVM utils ?

I tryied downloading ftp://sources.redhat.com/pub/dm/multipath-toolsmultipath-tools-0.4.3.tar.bz2

what do you think the 'dm' in that url stands for, hm?

Quoted 2 lines

But I fail to compile it so I'm also unable tu build the userspace lvm utils.

'userspace lvm utils' can be found here:

ftp://sources.redhat.com/pub/lvm2

multipath tools might be something different ... :)

Quoted 9 lines

--
Regards
Davide Rao
Client/server Unix
Atos Origin
Via C.Viola - Pont St. Martin (AO) Italy

  Cell :  +39 3357599151
  Tel  :  +39 125810433
  Email:  [email protected]

73 Thorsten

Signature · 3 lines
| Thorsten Kranzkowski        Internet: [email protected]                      |
| Mobile: ++49 170 1876134       Snail: Kiebitzstr. 14, 49324 Melle, Germany  |
| Ampr: dl8bcu@db0lj.#rpl.deu.eu, [email protected] [44.130.8.19] |
#7 lore raw

Re: Linux Alpha port: LVM

Quoted 3 lines
Quoted 1 line

Is LVM working on the alpha port 2.6 kernel series ?

works fine for me.

Are you using a redhat based distro (like suse, mandrake, alpha core or indeed redhat )?
Are you using stock kernel, libraries and tools or did you haveto build them yourself ?
Debian comes with LVM1 tools that do not work with 2.6 kernels so I need to compile them myself or install some ready build binary package for alpha processor and compatible with the libraries that come with debian3. What alpha architecture are you running on ?

Quoted 7 lines
Quoted 3 lines

If so where do I get libdevmapper so that I can build the userspace LVM utils ?

I tryied downloading ftp://sources.redhat.com/pub/dm/multipath-toolsmultipath-tools-0.4.3.tar.bz2

what do you think the 'dm' in that url stands for, hm?

Quoted 8 lines
Quoted 1 line

But I fail to compile it so I'm also unable tu build the userspace lvm utils.

'userspace lvm utils' can be found here:

ftp://sources.redhat.com/pub/lvm2

multipath tools might be something different ... :)

It may also have something more but it has libdevmapper in it ...
In any case I also tried downloading and compiling device-mapper.1.00.07.tgz from the link in the LVM2. It builds and installe fine but I still get compilation errore when I build LVM2. Configute is fine, here are a few lines concerning libdevmapper

checking libdevmapper.h usability... yes
checking libdevmapper.h presence... yes
checking for libdevmapper.h... yes

but when I try to compile:

gcc -c -I. -I../include -DLVM1_INTERNAL -DPOOL_INTERNAL -DCLUSTER_LOCKING_INTERNAL -DSNAPSHOT_INTERNAL -DMIRRORED_INTERNAL -DDEVMAPPER_SUPPORT -DO_DIRECT_SUPPORT -DHAVE_LIBDL -DHAVE_GETOPTLONG -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -O2 cache/lvmcache.c -o cache/lvmcache.o activate/activate.c: In function `target_present':
activate/activate.c:303: error: `DM_DEVICE_LIST_VERSIONS' undeclared (first use in this function)
activate/activate.c:303: error: (Each undeclared identifier is reported only once
activate/activate.c:303: error: for each function it appears in.)
activate/activate.c:314: warning: implicit declaration of function `dm_task_get_versions'
activate/activate.c:314: warning: nested extern declaration of `dm_task_get_versions'
activate/activate.c:314: warning: assignment makes pointer from integer without a cast
activate/activate.c:319: error: dereferencing pointer to incomplete type
...
same message repeated many times
...
make[1]: *** [activate/activate.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory `/usr/src/LVM2.2.01.09/lib'
make: *** [lib] Error 2

I'm using kernel 2.6.11.7 downloaded from kernel.org. Here's the relevent section for raid/lvm in config:
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set CONFIG_MD_RAID5=y
# CONFIG_MD_RAID6 is not set CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set

Do I need to patch kernel ?

Quoted 16 lines
Quoted 11 lines

--
Regards
Davide Rao
Client/server Unix
Atos Origin
Via C.Viola - Pont St. Martin (AO) Italy

 Cell :  +39 3357599151
 Tel  :  +39 125810433
 Email:  [email protected]

73 Thorsten

#8 lore raw

Re: Linux Alpha port: LVM

Sorry to bother you all ... the problem was that I issued some options during configuration to specify where the kernel was, apparently I should only do that on 2.4 series kernels.

I re-extracted the kernel sources and started over again. It's nor working fine now.

Thanks anyway
--
Regards
Davide Rao
Client/server Unix
Atos Origin
Via C.Viola - Pont St. Martin (AO) Italy

  Cell :  +39 3357599151
  Tel  :  +39 125810433
  Email:  [email protected]
Quoted 104 lines · Davide Rao
Quoted 4 lines
Quoted 1 line

Is LVM working on the alpha port 2.6 kernel series ?

works fine for me.

Are you using a redhat based distro (like suse, mandrake, alpha core or indeed redhat )?
Are you using stock kernel, libraries and tools or did you haveto build them yourself ?
Debian comes with LVM1 tools that do not work with 2.6 kernels so I need to compile them myself or install some ready build binary package for alpha processor and compatible with the libraries that come with debian3. What alpha architecture are you running on ?

Quoted 13 lines
Quoted 4 lines

If so where do I get libdevmapper so that I can build the userspace LVM utils ?

I tryied downloading ftp://sources.redhat.com/pub/dm/multipath-toolsmultipath-tools-0.4.3.tar.bz2

what do you think the 'dm' in that url stands for, hm?

Quoted 1 line

But I fail to compile it so I'm also unable tu build the userspace lvm utils.

Quoted 5 lines

'userspace lvm utils' can be found here:

ftp://sources.redhat.com/pub/lvm2

multipath tools might be something different ... :)

It may also have something more but it has libdevmapper in it ...
In any case I also tried downloading and compiling device-mapper.1.00.07.tgz from the link in the LVM2. It builds and installe fine but I still get compilation errore when I build LVM2. Configute is fine, here are a few lines concerning libdevmapper

checking libdevmapper.h usability... yes
checking libdevmapper.h presence... yes
checking for libdevmapper.h... yes

but when I try to compile:

gcc -c -I. -I../include -DLVM1_INTERNAL -DPOOL_INTERNAL

(quoted diff) +0 -5
-DCLUSTER_LOCKING_INTERNAL -DSNAPSHOT_INTERNAL -DMIRRORED_INTERNAL 
-DDEVMAPPER_SUPPORT -DO_DIRECT_SUPPORT -DHAVE_LIBDL -DHAVE_GETOPTLONG 
-fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings 
-Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline 
-O2 cache/lvmcache.c -o cache/lvmcache.o

activate/activate.c: In function `target_present':
activate/activate.c:303: error: `DM_DEVICE_LIST_VERSIONS' undeclared (first use in this function) activate/activate.c:303: error: (Each undeclared identifier is reported only once activate/activate.c:303: error: for each function it appears in.) activate/activate.c:314: warning: implicit declaration of function dm_task_get_versions' activate/activate.c:314: warning: nested extern declaration of dm_task_get_versions' activate/activate.c:314: warning: assignment makes pointer from integer without a cast activate/activate.c:319: error: dereferencing pointer to incomplete type
...
same message repeated many times
...
make[1]: *** [activate/activate.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory `/usr/src/LVM2.2.01.09/lib'
make: *** [lib] Error 2

I'm using kernel 2.6.11.7 downloaded from kernel.org. Here's the relevent section for raid/lvm in config:
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set CONFIG_MD_RAID5=y
# CONFIG_MD_RAID6 is not set CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set

Do I need to patch kernel ?

Quoted 17 lines
Quoted 11 lines
Signature · 9 lines
-- 
Regards
Davide Rao
 Client/server Unix
 Atos Origin
 Via C.Viola - Pont St. Martin (AO) Italy
 Cell :  +39 3357599151
 Tel  :  +39 125810433
 Email:  [email protected]

73 Thorsten