Skip to contentSkip to conversation

Kernel BUG in khubd with 2.4.30 x86_64

DISCUSSION James Pearson 1 participant 2 messages Apr 18, 2005 – Apr 19, 2005

lore
Share & tools
lore
#0 lore raw

I'm using a Dell PowerEdge 2850 with dual 3.6Ghz Xeon EM64T CPUs.

Using a vanilla 2.4.30 SMP x86_64 kernel, when I try to modprobe usb-uhci I get:

kernel BUG in header file at line 160

Kernel BUG at panic:149

invalid operand: 0000

dmesg and ksymoops output below.

Thanks

James Pearson

dmesg:

usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 17:44:32 Apr 17 2005 usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0x9ce0, IRQ 16
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0x9cc0, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0x9ca0, IRQ 18
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver hub.c: new USB device 00:1d.0-1, assigned address 2 kernel BUG in header file at line 160

Kernel BUG at panic:149
invalid operand: 0000
CPU 1
Pid: 1380, comm: khubd Not tainted
RIP: 0010:[<ffffffff80121ae4>]
RSP: 0018:000001023c3ddcd8  EFLAGS: 00010016
RAX: 0000000000000026 RBX: 000001023e8f6880 RCX: 0000000000000000
RDX: 000001023e163f08 RSI: ffffffff803e4000 RDI: 0000000000000000
RBP: 000001023eac6400 R08: ffffffffffffffff R09: 000000000000000d
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000002 R14: 000001023c4dcf80 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffffffff803daa00(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000004031a0 CR3: 000000000d674000 CR4: 00000000000006a0
Process khubd (pid: 1380, stackpage=1023c3dd000)
Stack: 000001023c3ddcd8 0000000000000018 ffffffff80121ae4 000001023eac6400
       ffffffffa013b8c4 000001023c3ddd28 0000000000000202 000001023d641200
       00000000000001f4 000001023e8f6880 000001023c3ddd48 000001023c3ddd68
Call Trace: [<ffffffff80121ae4>] [<ffffffffa013b8c4>]
       [<ffffffffa012443a>] [<ffffffffa012455c>] [<ffffffffa01246e3>]
       [<ffffffffa012479d>] [<ffffffffa0125486>] [<ffffffffa012602f>]
       [<ffffffffa0127c1a>] [<ffffffffa0127dbf>] [<ffffffffa0127f95>]
       [<ffffffff80110888>] [<ffffffffa0127f40>] [<ffffffff80110880>]


Code: 0f 0b 02 79 29 80 ff ff ff ff 95 00 eb fe 90 90 90 90 90 90

RIP [<ffffffff80121ae4>] RSP <000001023c3ddcd8>

ksymoops:

ksymoops 2.4.11 on x86_64 2.4.30. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.30/ (default)
-m /boot/System.map-2.4.30 (specified)

Error (expand_objects): cannot stat(/lib/xfs.o) for xfs Error (expand_objects): cannot stat(/lib/raid1.o) for raid1 Error (expand_objects): cannot stat(/lib/mptscsih.o) for mptscsih Error (expand_objects): cannot stat(/lib/mptbase.o) for mptbase Error (expand_objects): cannot stat(/lib/sd_mod.o) for sd_mod Error (expand_objects): cannot stat(/lib/scsi_mod.o) for scsi_mod SGI XFS with no debug enabled
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex kernel BUG in header file at line 160

Kernel BUG at panic:149
invalid operand: 0000
CPU 1
Pid: 1380, comm: khubd Not tainted
RIP: 0010:[<ffffffff80121ae4>]
Using defaults from ksymoops -t elf64-x86-64 -a i386:x86-64
RSP: 0018:000001023c3ddcd8  EFLAGS: 00010016
RAX: 0000000000000026 RBX: 000001023e8f6880 RCX: 0000000000000000
RDX: 000001023e163f08 RSI: ffffffff803e4000 RDI: 0000000000000000
RBP: 000001023eac6400 R08: ffffffffffffffff R09: 000000000000000d
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000002 R14: 000001023c4dcf80 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffffffff803daa00(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000004031a0 CR3: 000000000d674000 CR4: 00000000000006a0
Process khubd (pid: 1380, stackpage=1023c3dd000)
Stack: 000001023c3ddcd8 0000000000000018 ffffffff80121ae4 000001023eac6400
       ffffffffa013b8c4 000001023c3ddd28 0000000000000202 000001023d641200
       00000000000001f4 000001023e8f6880 000001023c3ddd48 000001023c3ddd68
Call Trace: [<ffffffff80121ae4>] [<ffffffffa013b8c4>]
       [<ffffffffa012443a>] [<ffffffffa012455c>] [<ffffffffa01246e3>]
       [<ffffffffa012479d>] [<ffffffffa0125486>] [<ffffffffa012602f>]
       [<ffffffffa0127c1a>] [<ffffffffa0127dbf>] [<ffffffffa0127f95>]
       [<ffffffff80110888>] [<ffffffffa0127f40>] [<ffffffff80110880>]
Code: 0f 0b 02 79 29 80 ff ff ff ff 95 00 eb fe 90 90 90 90 90 90
Quoted 3 lines
Quoted 3 lines

RIP; ffffffff80121ae4 <__out_of_line_bug+14/30> <=====

RSI; ffffffff803e4000 <init_task_union+0/2000>

Trace; ffffffff80121ae4 <__out_of_line_bug+14/30>
Trace; ffffffffa013b8c4 <[usb-uhci]uhci_submit_urb+284/410> Trace; ffffffffa012443a <[usbcore]usb_submit_urb+2a/40> Trace; ffffffffa012455c <[usbcore]usb_start_wait_urb+ac/1b0> Trace; ffffffffa01246e3 <[usbcore]usb_internal_control_msg+83/c0> Trace; ffffffffa012479d <[usbcore]usb_control_msg+7d/a0> Trace; ffffffffa0125486 <[usbcore]usb_set_address+46/50> Trace; ffffffffa012602f <[usbcore]usb_new_device+1f/1a0> Trace; ffffffffa0127c1a <[usbcore]usb_hub_port_connect_change+1ea/240> Trace; ffffffffa0127dbf <[usbcore]usb_hub_events+14f/2d0> Trace; ffffffffa0127f95 <[usbcore]usb_hub_thread+55/140> Trace; ffffffff80110888 <child_rip+8/10>
Trace; ffffffffa0127f40 <[usbcore]usb_hub_thread+0/140> Trace; ffffffff80110880 <child_rip+0/10>

Code; ffffffff80121ae4 <__out_of_line_bug+14/30>
0000000000000000 <_RIP>:
Code; ffffffff80121ae4 <__out_of_line_bug+14/30> <=====
0: 0f 0b ud2a <=====
Code; ffffffff80121ae6 <__out_of_line_bug+16/30>
2: 02 79 29 add 0x29(%rcx),%bh
Code; ffffffff80121ae9 <__out_of_line_bug+19/30>
5: 80 ff ff cmp $0xff,%bh
Code; ffffffff80121aec <__out_of_line_bug+1c/30>
8: ff (bad)
Code; ffffffff80121aed <__out_of_line_bug+1d/30>
9: ff 95 00 eb fe 90 callq *0xffffffff90feeb00(%rbp)
Code; ffffffff80121af3 <__out_of_line_bug+23/30>
f: 90 nop
Code; ffffffff80121af4 <__out_of_line_bug+24/30>
10: 90 nop
Code; ffffffff80121af5 <__out_of_line_bug+25/30>
11: 90 nop
Code; ffffffff80121af6 <__out_of_line_bug+26/30>
12: 90 nop
Code; ffffffff80121af7 <__out_of_line_bug+27/30>
13: 90 nop

6 errors issued. Results may not be reliable.

#1 lore raw

I've worked out what the problem is - this machine has more than 4GB memory and I didn't have IOMMU compiled in - rebuilding the kernel with this set and the problem goes away.

James Pearson

Quoted 168 lines · James Pearson

I'm using a Dell PowerEdge 2850 with dual 3.6Ghz Xeon EM64T CPUs.

Using a vanilla 2.4.30 SMP x86_64 kernel, when I try to modprobe usb-uhci I get:

kernel BUG in header file at line 160

Kernel BUG at panic:149

invalid operand: 0000

dmesg and ksymoops output below.

Thanks

James Pearson

dmesg:

usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 17:44:32 Apr 17 2005 usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0x9ce0, IRQ 16
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0x9cc0, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0x9ca0, IRQ 18
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver hub.c: new USB device 00:1d.0-1, assigned address 2 kernel BUG in header file at line 160

Kernel BUG at panic:149
invalid operand: 0000
CPU 1
Pid: 1380, comm: khubd Not tainted
RIP: 0010:[<ffffffff80121ae4>]
RSP: 0018:000001023c3ddcd8  EFLAGS: 00010016
RAX: 0000000000000026 RBX: 000001023e8f6880 RCX: 0000000000000000
RDX: 000001023e163f08 RSI: ffffffff803e4000 RDI: 0000000000000000
RBP: 000001023eac6400 R08: ffffffffffffffff R09: 000000000000000d
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000002 R14: 000001023c4dcf80 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffffffff803daa00(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000004031a0 CR3: 000000000d674000 CR4: 00000000000006a0
Process khubd (pid: 1380, stackpage=1023c3dd000)
Stack: 000001023c3ddcd8 0000000000000018 ffffffff80121ae4 000001023eac6400
       ffffffffa013b8c4 000001023c3ddd28 0000000000000202 000001023d641200
       00000000000001f4 000001023e8f6880 000001023c3ddd48 000001023c3ddd68
Call Trace: [<ffffffff80121ae4>] [<ffffffffa013b8c4>]
       [<ffffffffa012443a>] [<ffffffffa012455c>] [<ffffffffa01246e3>]
       [<ffffffffa012479d>] [<ffffffffa0125486>] [<ffffffffa012602f>]
       [<ffffffffa0127c1a>] [<ffffffffa0127dbf>] [<ffffffffa0127f95>]
       [<ffffffff80110888>] [<ffffffffa0127f40>] [<ffffffff80110880>]


Code: 0f 0b 02 79 29 80 ff ff ff ff 95 00 eb fe 90 90 90 90 90 90

RIP [<ffffffff80121ae4>] RSP <000001023c3ddcd8>

ksymoops:

ksymoops 2.4.11 on x86_64 2.4.30. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.30/ (default)
-m /boot/System.map-2.4.30 (specified)

Error (expand_objects): cannot stat(/lib/xfs.o) for xfs Error (expand_objects): cannot stat(/lib/raid1.o) for raid1 Error (expand_objects): cannot stat(/lib/mptscsih.o) for mptscsih Error (expand_objects): cannot stat(/lib/mptbase.o) for mptbase Error (expand_objects): cannot stat(/lib/sd_mod.o) for sd_mod Error (expand_objects): cannot stat(/lib/scsi_mod.o) for scsi_mod SGI XFS with no debug enabled
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex kernel BUG in header file at line 160

Kernel BUG at panic:149
invalid operand: 0000
CPU 1
Pid: 1380, comm: khubd Not tainted
RIP: 0010:[<ffffffff80121ae4>]
Using defaults from ksymoops -t elf64-x86-64 -a i386:x86-64
RSP: 0018:000001023c3ddcd8  EFLAGS: 00010016
RAX: 0000000000000026 RBX: 000001023e8f6880 RCX: 0000000000000000
RDX: 000001023e163f08 RSI: ffffffff803e4000 RDI: 0000000000000000
RBP: 000001023eac6400 R08: ffffffffffffffff R09: 000000000000000d
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000002 R14: 000001023c4dcf80 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffffffff803daa00(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000004031a0 CR3: 000000000d674000 CR4: 00000000000006a0
Process khubd (pid: 1380, stackpage=1023c3dd000)
Stack: 000001023c3ddcd8 0000000000000018 ffffffff80121ae4 000001023eac6400
       ffffffffa013b8c4 000001023c3ddd28 0000000000000202 000001023d641200
       00000000000001f4 000001023e8f6880 000001023c3ddd48 000001023c3ddd68
Call Trace: [<ffffffff80121ae4>] [<ffffffffa013b8c4>]
       [<ffffffffa012443a>] [<ffffffffa012455c>] [<ffffffffa01246e3>]
       [<ffffffffa012479d>] [<ffffffffa0125486>] [<ffffffffa012602f>]
       [<ffffffffa0127c1a>] [<ffffffffa0127dbf>] [<ffffffffa0127f95>]
       [<ffffffff80110888>] [<ffffffffa0127f40>] [<ffffffff80110880>]
Code: 0f 0b 02 79 29 80 ff ff ff ff 95 00 eb fe 90 90 90 90 90 90
Quoted 3 lines
Quoted 3 lines

RIP; ffffffff80121ae4 <__out_of_line_bug+14/30> <=====

RSI; ffffffff803e4000 <init_task_union+0/2000>

Trace; ffffffff80121ae4 <__out_of_line_bug+14/30>
Trace; ffffffffa013b8c4 <[usb-uhci]uhci_submit_urb+284/410> Trace; ffffffffa012443a <[usbcore]usb_submit_urb+2a/40> Trace; ffffffffa012455c <[usbcore]usb_start_wait_urb+ac/1b0> Trace; ffffffffa01246e3 <[usbcore]usb_internal_control_msg+83/c0> Trace; ffffffffa012479d <[usbcore]usb_control_msg+7d/a0> Trace; ffffffffa0125486 <[usbcore]usb_set_address+46/50> Trace; ffffffffa012602f <[usbcore]usb_new_device+1f/1a0> Trace; ffffffffa0127c1a <[usbcore]usb_hub_port_connect_change+1ea/240> Trace; ffffffffa0127dbf <[usbcore]usb_hub_events+14f/2d0> Trace; ffffffffa0127f95 <[usbcore]usb_hub_thread+55/140> Trace; ffffffff80110888 <child_rip+8/10>
Trace; ffffffffa0127f40 <[usbcore]usb_hub_thread+0/140> Trace; ffffffff80110880 <child_rip+0/10>

Code; ffffffff80121ae4 <__out_of_line_bug+14/30>
0000000000000000 <_RIP>:
Code; ffffffff80121ae4 <__out_of_line_bug+14/30> <=====
0: 0f 0b ud2a <=====
Code; ffffffff80121ae6 <__out_of_line_bug+16/30>
2: 02 79 29 add 0x29(%rcx),%bh
Code; ffffffff80121ae9 <__out_of_line_bug+19/30>
5: 80 ff ff cmp $0xff,%bh
Code; ffffffff80121aec <__out_of_line_bug+1c/30>
8: ff (bad)
Code; ffffffff80121aed <__out_of_line_bug+1d/30>
9: ff 95 00 eb fe 90 callq *0xffffffff90feeb00(%rbp)
Code; ffffffff80121af3 <__out_of_line_bug+23/30>
f: 90 nop
Code; ffffffff80121af4 <__out_of_line_bug+24/30>
10: 90 nop
Code; ffffffff80121af5 <__out_of_line_bug+25/30>
11: 90 nop
Code; ffffffff80121af6 <__out_of_line_bug+26/30>
12: 90 nop
Code; ffffffff80121af7 <__out_of_line_bug+27/30>
13: 90 nop

6 errors issued. Results may not be reliable.