Skip to contentSkip to conversation

hama card reader 19in1 question on USB (not workie)

DISCUSSION Grzegorz Piotr Jaskiewicz 2 participants 3 messages Apr 19, 2005

lore
Share & tools
lore
#0 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello

Does anyone have sucessfully used device in subject ? It doesn't seem to work here. All I get is:

Apr 19 14:03:44 thinkpaddie kernel: usb 1-1.4: new full speed USB device
using uhci_hcd and address 7
Apr 19 14:03:44 thinkpaddie kernel: scsi5 : SCSI emulation for USB Mass
Storage devices
Apr 19 14:03:44 thinkpaddie kernel: usb-storage: device found at 7
Apr 19 14:03:44 thinkpaddie kernel: usb-storage: waiting for device to
settle before scanning
Apr 19 14:03:46 thinkpaddie usb.agent[13125]:      usb-storage: already
loaded
Apr 19 14:03:49 thinkpaddie kernel:   Vendor: USB Read  Model: CF Card
     CF  Rev: 1.8D
Apr 19 14:03:49 thinkpaddie kernel:   Type:   Direct-Access
         ANSI SCSI revision: 00
Apr 19 14:03:50 thinkpaddie kernel: Attached scsi removable disk sda at
scsi5, channel 0, id 0, lun 0
Apr 19 14:03:50 thinkpaddie kernel: usb-storage: device scan complete
Apr 19 14:03:50 thinkpaddie scsi.agent[13167]:      sd_mod: loaded
sucessfully (for disk)
Apr 19 14:03:50 thinkpaddie udev[13180]: configured rule in
'/etc/udev/rules.d/devfs.rules' at line 23 applied, added symlink '%k %c{2}'
Apr 19 14:03:50 thinkpaddie udev[13180]: configured rule in
'/etc/udev/rules.d/devfs.rules' at line 23 applied, 'sda' becomes '%c{1}'
Apr 19 14:03:50 thinkpaddie udev[13180]: creating device node

'/dev/scsi/host5/bus0/target0/lun0/disc'

But no SD card is detected, and I can't mount the card.

- --
GJ
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (GNU/Linux)

iD8DBQFCZPPdi0HtPCVkDAURAh39AJ4xIwn3X95ez+Kmn9v/vm6LbbXVDgCffdol +pDKDEIgxyNUy7iTugUxHPY=
=riFn
-----END PGP SIGNATURE-----

#1 lore raw

Hi Grzegorz :)

* Grzegorz Piotr Jaskiewicz <[email protected]> dixit:

Quoted 4 lines
Apr 19 14:03:49 thinkpaddie kernel:   Vendor: USB Read  Model: CF Card
     CF  Rev: 1.8D
Apr 19 14:03:49 thinkpaddie kernel:   Type:   Direct-Access
         ANSI SCSI revision: 00

[...]

Quoted 1 line

But no SD card is detected, and I can't mount the card.

Only the first LUN is being detected. You need a kernel with
CONFIG_SCSI_MULTI_LUN in order to have all slots detected in the card reader. I have a 8-in-1 card reader with 4 slots and I need multiple LUN support.

Try that ;)

Raúl Núñez de Arenas Coronado

Signature · 3 lines
Linux Registered User 88736
http://www.dervishd.net & http://www.pleyades.net/
It's my PC and I'll cry if I want to...
#2 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Thanks dude, it worked !

Quoted 14 lines · DervishD

Hi Grzegorz :)

* Grzegorz Piotr Jaskiewicz <[email protected]> dixit:

Quoted 4 lines
Apr 19 14:03:49 thinkpaddie kernel:   Vendor: USB Read  Model: CF Card
    CF  Rev: 1.8D
Apr 19 14:03:49 thinkpaddie kernel:   Type:   Direct-Access
        ANSI SCSI revision: 00

[...]

Quoted 1 line

But no SD card is detected, and I can't mount the card.

Quoted 9 lines

Only the first LUN is being detected. You need a kernel with
CONFIG_SCSI_MULTI_LUN in order to have all slots detected in the card reader. I have a 8-in-1 card reader with 4 slots and I need multiple LUN support.

Try that ;)

Raúl Núñez de Arenas Coronado

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (GNU/Linux)

iD8DBQFCZV+ki0HtPCVkDAURAl+SAJ9EtCRBO1al5Q/jkYXAgMEpMdpmuACdE9ix 0g6SWend2Gta9G7mJuHR26o=
=0c55
-----END PGP SIGNATURE-----