Skip to contentSkip to conversation

[Fwd: Bogus PNI flag in /proc/cpuinfo]

Fwd: Bogus PNI flag in /proc/cpuinfo Dario Birtic 2 participants 2 messages Apr 27, 2005

lore
Share & tools
lore
#0 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

I am expiriencing bogus PNI /proc/cpuinfo flag (and as far I can tell, out of plenty of auxillary /proc/cpuinfo flags I have seen on the internet, everyone having the athlon64 architecture also):

cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 15
model name : AMD Athlon(tm) 64 Processor 3500+
stepping : 0
cpu MHz : 2340.189
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 pni syscall nx mmxext lm 3dnowext 3dnow
bogomips : 4636.67
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp

Though this processor doesn't support PNI (aka SSE3) it is reported in the flags.

cat /proc/version
Linux version 2.6.11-gentoo-r6 (root@beast) (gcc version 3.4.3 20041125 (Gentoo Linux 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #2 Mon Apr 25 00:34:25 CEST 2005

I am expiriencing this behaviour since cca. 2.6.8.1.

A simple testcase shows:
cat << "EOF" > test_pni.c
#include <stdint.h>

uint8_t __attribute__((aligned(64))) current[64];
uint8_t previous[64];

int main()
{
int i;
uint64_t result;
uint32_t _eax, _ebx, _ecx, _edx; uint8_t _cpuid[13];
uint32_t *_cpuid0 = (uint32_t*) _cpuid; uint32_t *_cpuid1 = (uint32_t*) ( _cpuid + 4 ); uint32_t *_cpuid2 = (uint32_t*) ( _cpuid + 8 ); uint8_t *ptr0 = current;
uint8_t *ptr1 = previous;

__asm__ __volatile__ (

         "cpuid\n"
         : "=a" (_eax),
         "=b" (*_cpuid0), "=d" (*_cpuid1), "=c" (*_cpuid2)
         : "a" (0) );
   _cpuid[12] = 0;
   printf( "cpuid(0) returns %d (%s)\n", _eax, _cpuid );
   __asm__ __volatile__ (
         "cpuid\n"
         : "=a" (_eax), "=b" (_ebx), "=c" (_ecx), "=d" (_edx)
         : "a" (1) );
   printf( "cpuid(1) returns %08x %08x %08x %08x\n",
         _eax, _ebx, _ecx, _edx );
   memset( current, 0xaa, 64 );
   memset( previous, 0x55, 64 );
   for( i = 0; i < 4; i ++ ) {
      __asm__ __volatile__ (
            "movdqa %0, %%xmm0\n"
            "movdqu %1, %%xmm1\n"
            "psadbw %%xmm1, %%xmm0\n"
            "paddw  %%xmm0, %%xmm2\n"
            "haddps %%xmm2, %%xmm2\n"
            "haddps %%xmm2, %%xmm2\n"
            : : "m" (*ptr0),
            "m" (*ptr1) : "xmm0", "xmm1", "xmm2" );
      ptr0 += 16;
      ptr1 += 16;
   }
   __asm__ __volatile__ (
         "movq %%xmm2, %0\n"
         : "=m" (result) );

printf( "Result is %llu\n", result );
}
EOF
gcc -o test_pni test_pni.c
./test_pni

cpuid(0) returns 1 (AuthenticAMD)
cpuid(1) returns 00000ff0 00000800 00000000 078bfbff Illegal instruction

This is expected since there is no PNI on this processor supported (haddps being SSE3 instruction). Please also note that ECX bit 0 (PNI support) is clear showing that SSE3 is *not* supported.

Regards
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFCcAzG0UeelEJkwB4RAuKVAJ0fjAn/f58oUBOHXyP91D7Wa8AsHgCg4hUq PuToRHnlBD/lLoG1Y+RIBTk=
=erX+
-----END PGP SIGNATURE-----