Skip to contentSkip to conversation

Enable interrupts on the IPMI BT driver

PATCH New Corey Minyard 1 participant 1 message Apr 29, 2005 IPMI

lore
Share & tools
lore

Corey Minyard

author
#0 lore raw

PATCH 1/1 Enable interrupts on the IPMI BT driver

Enable interrupts for a BT interface. There is a specific register that needs to be set up to enable interrupts that also must be modified to clear the irq.

Also, don't reset the BMC on a BT interface. That's probably not a good idea as the BMC may be performing other important functions and a reset should only be a last resort. Also, that register is also used to enable/disable interrupts to the BT; modifying it may screw up the interrupts.

Signed-off-by Corey Minyard <[email protected]>
drivers/char/ipmi/ipmi_si_intf.c +35 -5
Index: linux-2.6.12-rc2/drivers/char/ipmi/ipmi_si_intf.c
===================================================================
@@ -100,6 +100,11 @@
 	/* FIXME - add watchdog stuff. */
 };
 
+/* Some BT-specific defines we need here. */
+#define IPMI_BT_INTMASK_REG		2
+#define IPMI_BT_INTMASK_CLEAR_IRQ_BIT	2
+#define IPMI_BT_INTMASK_ENABLE_IRQ_BIT	1
+
 enum si_type {
     SI_KCS, SI_SMIC, SI_BT
 };

@@ -876,6 +881,17 @@
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t si_bt_irq_handler(int irq, void *data, struct pt_regs *regs)
+{
+	struct smi_info *smi_info = data;
+	/* We need to clear the IRQ flag for the BT interface. */
+	smi_info->io.outputb(&smi_info->io, IPMI_BT_INTMASK_REG,
+			     IPMI_BT_INTMASK_CLEAR_IRQ_BIT
+			     | IPMI_BT_INTMASK_ENABLE_IRQ_BIT);
+	return si_irq_handler(irq, data, regs);
+}
+
+
 static struct ipmi_smi_handlers handlers =
 {
 	.owner                  = THIS_MODULE,

@@ -1002,11 +1018,22 @@
 	if (!info->irq)
 		return 0;
 
-	rv = request_irq(info->irq,
-			 si_irq_handler,
-			 SA_INTERRUPT,
-			 DEVICE_NAME,
-			 info);
+	if (info->si_type == SI_BT) {
+		rv = request_irq(info->irq,
+				 si_bt_irq_handler,
+				 SA_INTERRUPT,
+				 DEVICE_NAME,
+				 info);
+		if (!rv)
+			/* Enable the interrupt in the BT interface. */
+			info->io.outputb(&info->io, IPMI_BT_INTMASK_REG,
+					 IPMI_BT_INTMASK_ENABLE_IRQ_BIT);
+	} else
+		rv = request_irq(info->irq,
+				 si_irq_handler,
+				 SA_INTERRUPT,
+				 DEVICE_NAME,
+				 info);
 	if (rv) {
 		printk(KERN_WARNING
 		       "ipmi_si: %s unable to claim interrupt %d,"

@@ -1025,6 +1052,9 @@
 	if (!info->irq)
 		return;
 
+	if (info->si_type == SI_BT)
+		/* Disable the interrupt in the BT interface. */
+		info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, 0);
 	free_irq(info->irq, info);
 }
drivers/char/ipmi/ipmi_bt_sm.c +0 -1
Index: linux-2.6.12-rc2/drivers/char/ipmi/ipmi_bt_sm.c
===================================================================
@@ -235,7 +235,6 @@
 	if (BT_STATUS & BT_B_BUSY) BT_CONTROL(BT_B_BUSY);
 	BT_CONTROL(BT_CLR_WR_PTR);
 	BT_CONTROL(BT_SMS_ATN);
-	BT_INTMASK_W(BT_BMC_HWRST);
 #ifdef DEVELOPMENT_ONLY_NOT_FOR_PRODUCTION
 	if (BT_STATUS & BT_B2H_ATN) {
 		int i;