Skip to contentSkip to conversation

Xircom_cb - tulip ethernet chip

DISCUSSION Linda W 2 participants 2 messages Apr 29, 2005

lore
Share & tools
lore

Linda W

author
#0 lore raw

Hi...

I have a Xircom Cardbus 10/100 HD/FD duplex card that seems to always be booting into 10Mb/s. It's connected to a 10/100 switch that most everything else connects at 100Mb to, but the Xircom is connecting at the lower speed.

I notice a bunch of options that can be specified to the Tulip driver in the drivers/net/tulip directory in the file tulip_core.c. How do I pass these options to the running driver? Can I change it "on the fly", or do I need to pass the options in on the command line? If that's the case, how do I include the option? Just place it, naked, on the command line and hope that the module will see the argument and it will "just work"? Seems a bit of a shot in the dark -- like I might have to say something like "net=option" or "tulip=option" or something...

Any help/hints? How to specify options to the module doesn't seem to be covered in the Documentation section (Documentation/DocBook/tulip-user.tmpl).

Thanks,
Linda

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#1 lore raw
Quoted 15 lines · Linda W

Hi...

I have a Xircom Cardbus 10/100 HD/FD duplex card that seems to always be booting into 10Mb/s. It's connected to a 10/100 switch that most everything else connects at 100Mb to, but the Xircom is connecting at the lower speed.

I notice a bunch of options that can be specified to the Tulip driver in the drivers/net/tulip directory in the file tulip_core.c. How do I pass these options to the running driver? Can I change it "on the fly", or do I need to pass the options in on the command line? If that's the case, how do I include the option? Just place it, naked, on the command line and hope that the module will see the argument and it will "just work"? Seems a bit of a shot in the dark -- like
I might have to say something like "net=option" or "tulip=option" or something...

Quoted 3 lines

Any help/hints? How to specify options to the module doesn't seem to be covered in the Documentation section (Documentation/DocBook/tulip-user.tmpl).

There is a program named mii-tool which can change the interface.

Quoted 3 lines

Thanks,
Linda

--
?

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs