Skip to contentSkip to conversation

port and adress forward

DISCUSSION Roberto Dud (listas) 4 participants 5 messages May 9, 2005

lore
Share & tools
lore
#0 lore raw

Hi All,

I have a web and mail server in my local lan with ip 192.168.0.x and I have a firewall / gateway with valid address. I have a policy a to redirect port 80 to my internal server. But I try to access my website inside my internal lan and doesn't access.

My chain is below:

iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j DNAT
--to-dest 192.168.0.X
iptables -A FORWARD -p tcp -i eth0 --dport 80 -d 192.168.0.X -j ACCEPT

Anyone help me?

thanks,

Dud.

#2 lore raw
In reply to Taylor, Grant
Quoted 17 lines · Grant
Quoted 7 lines

I have a web and mail server in my local lan with ip 192.168.0.x and I have a firewall / gateway with valid address. I have a policy a to redirect port 80 to my internal server. But I try to access my website inside my internal lan and doesn't access.

My chain is below:

iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j DNAT
--to-dest 192.168.0.X
iptables -A FORWARD -p tcp -i eth0 --dport 80 -d 192.168.0.X -j ACCEPT

Add a rule to your nat table like this:

iptables -t nat -A PREROUTING -i eth1 -s 192.168.0.0/24 -d $External_IP_Address_of_your_firewall -p tcp --dport 80 -j DNAT --to-destination 192.168.0.x
iptables -t nat -A POSTROUTING -o eth1 -s 192.168.0.0/24 -d 192.168.0.x -p tcp --dport 80 -j SNAT --to-source $Internal_IP_Address_of_your_firewall iptables -A FORWARD -p tcp -i eth1 -o eth1 -d 192.168.0.x --dport 80
-j ACCEPT

Quoted 8 lines

This will DNAT any traffic coming from your LAN that is directed at the external IP of your firewall for your web server to go directly to the web server in house. The likely reason that things are not working for you now is that the external IP of your firewall / router is directly accessible from the firewall / router its self and thus the traffic will not (logically) go out the internet connection and back in and pass through your other DNAT / related rules.

Grant. . . .

it works....

thanks a lot...

Dud.

#3 lore raw
In reply to Roberto Dud (listas)
Quoted 6 lines

I have a web and mail server in my local lan with ip 192.168.0.x and I have a firewall / gateway with valid address. I have a policy a to redirect port 80 to my internal server. But I try to access my website inside my internal lan and doesn't access.

Quoted 6 lines

My chain is below:

iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 \
   -j DNAT --to-dest 192.168.0.X

iptables -A FORWARD -p tcp -i eth0 --dport 80 \
-d 192.168.0.X -j ACCEPT

I suppose your forward policy is DROP. Do you have a :
$IPT -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT in your ruleset ?

Gr,
Rob

#4 lore raw
In reply to Roberto Dud (listas)
Quoted 7 lines · Roberto Dud (listas)

Hi All,

I have a web and mail server in my local lan with ip 192.168.0.x and I have a firewall / gateway with valid address. I have a policy a to redirect port 80 to my internal server. But I try to access my website inside my internal lan and doesn't access.

Quoted 7 lines

My chain is below:

iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j DNAT
--to-dest 192.168.0.X
iptables -A FORWARD -p tcp -i eth0 --dport 80 -d 192.168.0.X -j ACCEPT

Anyone help me?

1) connect to the web server using its 192.168.0.X address--no firewall involved.

2) setup split dns so that www.mysite.com resolves to 192.168.0.X internally and the external IP of the firewall externally.

3) wait for someone else to post the stupid DNAT/SNAT solution.

-j

--
"Stewie: Mother, as first lady of the American stage Helen Hayes once
said, "I'm going to kill you.""
--Family Guy

#1 lore raw
In reply to Roberto Dud (listas)
Quoted 7 lines

I have a web and mail server in my local lan with ip 192.168.0.x and I have a firewall / gateway with valid address. I have a policy a to redirect port 80 to my internal server. But I try to access my website inside my internal lan and doesn't access.

My chain is below:

iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j DNAT
--to-dest 192.168.0.X
iptables -A FORWARD -p tcp -i eth0 --dport 80 -d 192.168.0.X -j ACCEPT

Add a rule to your nat table like this:

iptables -t nat -A PREROUTING -i eth1 -s 192.168.0.0/24 -d $External_IP_Address_of_your_firewall -p tcp --dport 80 -j DNAT --to-destination 192.168.0.x iptables -t nat -A POSTROUTING -o eth1 -s 192.168.0.0/24 -d 192.168.0.x -p tcp --dport 80 -j SNAT --to-source $Internal_IP_Address_of_your_firewall iptables -A FORWARD -p tcp -i eth1 -o eth1 -d 192.168.0.x --dport 80 -j ACCEPT

This will DNAT any traffic coming from your LAN that is directed at the external IP of your firewall for your web server to go directly to the web server in house. The likely reason that things are not working for you now is that the external IP of your firewall / router is directly accessible from the firewall / router its self and thus the traffic will not (logically) go out the internet connection and back in and pass through your other DNAT / related rules.

Grant. . . .