Skip to contentSkip to conversation

ALPS testers wanted (Was Re: [RFT/PATCH] KVMS, mouse losing sync and going crazy)

DISCUSSION Mitch 2 participants 3 messages May 10, 2005

lore
Share & tools
lore

Mitch

author
#0 lore raw

Still no go. Log attached.

-------- Original Message --------
Subject: Re: ALPS testers wanted (Was Re: [RFT/PATCH] KVMS, mouse losing sync and going crazy)
Date: Tue, 10 May 2005 12:30:23 -0500
From: Dmitry Torokhov <[email protected]>
Reply-To: [email protected]
To: Mitch <[email protected]>
CC: [email protected]
References: <[email protected]>

Quoted 6 lines · Mitch

Hi Dimitry,

Still no go. With ps2_drain() commented (not enabled) the touchpad mouse is completely unresponsive. With ps2_drain() un-commented, there is initial life, but it hangs shortly after that. Log attached.

Thank you for the log. V8 is uploaded. Alternatively, just change psmouse->pktcnt to psmouse->pktsize in drivers/input/mouse/alps.c::alps_poll().

Signature · 1 line
Dmitry
#1 lore raw
Quoted 2 lines · Mitch

Still no go. Log attached.

But I see a proper response (absolute packet) to the POLL command so we are maiking progress I think. It looks like the touchpad was left in disabled state somehow. Have you tried both the touchpad and trackpoint? Are both of them dead?

Signature · 1 line
Dmitry
#2 lore raw
Quoted 9 lines · Dmitry Torokhov
Quoted 2 lines · Mitch

Still no go. Log attached.

But I see a proper response (absolute packet) to the POLL command so we are maiking progress I think. It looks like the touchpad was left in disabled state somehow. Have you tried both the touchpad and trackpoint? Are both of them dead?

Btw, does it help if you stick "ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE)" at the end of alps_poll, just before "return rc"? Another option is sticking it before second alps_passthrough_mode.

Unfortunately we don't have any ALPS programming notes so we have to resort to trial-and-error way.

Signature · 1 line
Dmitry