[Bluez-users] Bluetooth-adapter not detected

Johannes Engel

author

2005-05-11 11:46 UTC #0 lore raw

Hi!

On my new Asus V6835VLP there is a bluetooth adapter by Toshiba with a CSR-chip. Using M$ WinXP everything works great. Only SuSE does not recognize the availability of the chip, it is just not available for SuSE. What can I do about that?

Greetings, Johannes

-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Michal Semler

2005-05-11 11:51 UTC #1 lore raw

Dne st 11. kv=ECtna 2005 13:46 Johannes Engel napsal(a):

Quoted 6 lines

Hi!
On my new Asus V6835VLP there is a bluetooth adapter by Toshiba with a CSR-chip. Using M$ WinXP everything works great. Only SuSE does not recognize the availability of the chip, it is just not available for SuSE. What can I do about that?

Probably you need inicialize adapter with some special kernel module (maybe= =20
acerhk)

Michal

Quoted 4 lines

Greetings, Johannes

Quoted 9 lines

-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=3D7393&alloc_id=3D16281&op=3Dclick
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

=2D-=20
S pozdravem

Michal Semler

-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Marcel Holtmann

maintainer

2005-05-11 11:55 UTC #2 lore raw

In reply to Johannes Engel

Hi Johannes,

Quoted 4 lines

On my new Asus V6835VLP there is a bluetooth adapter by Toshiba with a CSR-chip. Using M$ WinXP everything works great. Only SuSE does not recognize the availability of the chip, it is just not available for SuSE. What can I do about that?

check /proc/bus/usb/devices, but I think you need to activate it somehow before it will be detected by the USB bus.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Johannes Engel

2005-05-11 12:18 UTC #3 lore raw

Quoted 4 lines · Marcel Holtmann

check /proc/bus/usb/devices, but I think you need to activate it somehow before it will be detected by the USB bus.

But how to do that? I do not know any suitable method.

Greetings, Johannes

-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Marcel Holtmann

maintainer

2005-05-11 12:30 UTC #4 lore raw

Hi Johannes,

Quoted 5 lines

Quoted 4 lines
check /proc/bus/usb/devices, but I think you need to activate it somehow before it will be detected by the USB bus.
But how to do that? I do not know any suitable method.

first check /proc/bus/usb/devices.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Johannes Engel

2005-05-11 13:45 UTC #5 lore raw

Quoted 14 lines · Marcel Holtmann

Hi Johannes,
Quoted 9 lines
Quoted 6 lines
check /proc/bus/usb/devices, but I think you need to activate it somehow before it will be detected by the USB bus.
But how to do that? I do not know any suitable method.

Quoted 7 lines

first check /proc/bus/usb/devices.
Regards
Marcel

I did and found nothing about the bluetooth adapter. A copy of the output is enclosed.

Greetings, Johannes

T:  Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.11-20a-engel uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.3
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.11-20a-engel uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc= 93/900 us (10%), #Int=  1, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.11-20a-engel uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=046d ProdID=c00f Rev=11.10
S:  Manufacturer=Logitech
S:  Product=USB-PS/2 Optical Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=10ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.11-20a-engel uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 8
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.11-20a-engel ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms

Vinod

2005-05-11 16:38 UTC #6 lore raw

[Bluez-users] obex support for bluez

Hi All. Thanks for the USB dongle recommendations for my previous post. I had one more this time concerning bluetooth enabled ipaq's i have.

Is there anyway i can run obex over bluez without having to download some tar files and compiling them? I came across a couple of articles which point me towards downloading OpenOBEX files.

I need to run it over two ipaq's running familiar linux and they dont have any c compilers. some solutions i read about suggest compiling it elsewhere and loading the binary back to my ipaqs and running it. e.g www.handhelds.org/projects/skiffcluster.html is one place where i can compile for ARM architecture. Looking for a simpler solution if one exists.

Thanks,
Vinod

__________________________________
Do you Yahoo!?
Make Yahoo! your home page
http://www.yahoo.com/r/hs

-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Marcel Holtmann

maintainer

2005-05-11 16:56 UTC #8 lore raw

In reply to Johannes Engel

Hi Johannes,

Quoted 4 lines

Quoted 2 lines
first check /proc/bus/usb/devices.
I did and found nothing about the bluetooth adapter. A copy of the output is enclosed.

I doubt that it is connected otherwise then USB, but check lspci and dmesg for weird entries.

Does is have a hardware switch for WiFi/Bluetooth somewhere. Otherwise I think you need a special tool or ACPI module for it. Ask Asus or your manufacturer about it.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Marcel Holtmann

maintainer

2005-05-11 16:57 UTC #7 lore raw

Re: [Bluez-users] obex support for bluez

In reply to Vinod

Hi Vinod,

Quoted 9 lines

Thanks for the USB dongle recommendations for my previous post. I had one more this time concerning bluetooth enabled ipaq's i have.
Is there anyway i can run obex over bluez without having to download some tar files and compiling them? I came across a couple of articles which point me towards downloading OpenOBEX files.

Quoted 7 lines

I need to run it over two ipaq's running familiar linux and they dont have any c compilers. some solutions i read about suggest compiling it elsewhere and loading the binary back to my ipaqs and running it. e.g www.handhelds.org/projects/skiffcluster.html is one place where i can compile for ARM architecture. Looking for a simpler solution if one exists.

actually all distribution have an Bluetooth enabled OpenOBEX package and some tools for using it. Try KDE Bluetooth or Gnome Bluetooth or look for obexftp or obextool etc.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Johannes Engel

2005-05-11 17:09 UTC #9 lore raw

In reply to Marcel Holtmann

Quoted 9 lines · Marcel Holtmann

I doubt that it is connected otherwise then USB, but check lspci and
dmesg for weird entries.
Does is have a hardware switch for WiFi/Bluetooth somewhere. Otherwise I think you need a special tool or ACPI module for it. Ask Asus or your manufacturer about it.

After two weeks of guessing and trying it works now!!
There is a switch but under linux it needs half a minute to react. Now everything seems to be fine.
Anyway thanks a lot for your advice!

Greetings, Johannes

-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Nils Faerber

2005-05-11 17:11 UTC #10 lore raw

In reply to Marcel Holtmann

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 1 line · Marcel Holtmann

Hi Johannes,

Hi!

Quoted 9 lines

Quoted 3 lines
Quoted 1 line
first check /proc/bus/usb/devices.
I did and found nothing about the bluetooth adapter. A copy of the output is enclosed.
I doubt that it is connected otherwise then USB, but check lspci and dmesg for weird entries.
Does is have a hardware switch for WiFi/Bluetooth somewhere. Otherwise I think you need a special tool or ACPI module for it. Ask Asus or your manufacturer about it.

Asking Asus is IMHO pointless.
I still have a bad and nasty dispute with them going on for over two years now. Everyone at Asus except the Asians has no clue of the hardware they are selling :( And besides this dispute we ha d aproject using Asus hardware and Asus promised to supply development information. The docs they gave us were partially plain wrong and incomplete. And besides that some of their parts are really obscure.

At least for me and a friend speaking, no Asus ever again :( They used to be quite good but recent experience proofs this wrong.

So my tip would be: bring that thing back to your dealer and buy something that is known to work... for notebooks I now went towards IBM, T42p currently the best workstation alike notebook I know and fully Linux supported. But that's another story and off-topic.

Quoted 2 lines

Regards
Marcel

CU
nils faerber

- --
kernel concepts Tel: +49-271-771091-12
Dreisbachstr. 24 Fax: +49-271-771091-19
D-57250 Netphen Mob: +49-176-21024535
- --
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFCgjyuJXeIURG1qHgRAj99AJ45QYIeBaR+4nElBii73P7Kxd/OpwCfWxBr voYjbFuPUoql1hF4WP9pL7Y=
=L7js
-----END PGP SIGNATURE-----

-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users