Skip to contentSkip to conversation

Patch for cx88-cards.c for DVICO-FusionHDTV 3 GOLD Q

PATCH Michael Krufky 2 participants 2 messages May 12, 2005 – May 19, 2005 3 messages not in the archive Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hello,

I haven't submitted a kernel patch before, so please forgive me if this isn't the proper protocol. I have the DVICO-FusionHDTV 3 GOLD Q, and I got it to autodetect and tune into some NTSC cable channels (in less-than perfect quality) after making the following change:

cx88-cards.c 2005-05-11 21:09:26.000000000 -0400 renamed from cx88-cards.c 2005-05-10 19:30:47.000000000 -0400 +4 -0
@@ -524,6 +524,10 @@
        .subdevice = 0xd810,
        .card      = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD,
    },{
+        .subvendor = 0x18ac,
+        .subdevice = 0xd820,
+        .card      = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD,
+    },{
        .subvendor = 0x18AC,
        .subdevice = 0xDB00,
        .card      = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1,

I've been told that the whitespace gets mangled in the body of the email, so I've included the .diff as an email attachment as well. Please incorporate this into the next version of the driver.

Thank you,

Michael Krufky
[email protected]

cx88-cards.c +4 -0
@@ -524,6 +524,10 @@
 		.subdevice = 0xd810,
 		.card      = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD,
 	},{
+		.subvendor = 0x18ac,
+		.subdevice = 0xd820,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD,
+	},{
 		.subvendor = 0x18AC,
 		.subdevice = 0xDB00,
 		.card      = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1,

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#4 lore raw

The previous patch that I submitted has been revised, and here is the version that has been included in 2.6.12-rc4-mm2: (This patch is against 2.6.12-rc4).

This patch allows full analog functionality for the DViCO FusionHDTV3 Gold-Q, 18ac:d820 which has a Conexant cx23882, Thompson7611, and LG 3302. It does NOT yet support digital decoding or digital audio without the internal analog audio jack connected to the sound board, but it works perfectly in analog mode.

Signed-off-by Michael Krufky
drivers/media/video/cx88/cx88-cards.c +31 -0
diff -puN a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
@@ -435,6 +435,33 @@ struct cx88_board cx88_boards[] = {
 		 }
 #endif
 	},
+        [CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q] = {
+                .name           = "DViCO - FusionHDTV 3 Gold-Q",
+                .tuner_type     = 52, /* Thomson DDT 7610 ATSC/NTSC - Its actually a 7611 chip, but this works */
+                .input          = {{
+                        .type   = CX88_VMUX_TELEVISION,
+                        .vmux   = 0,
+                        .gpio0  = 0x0f0d,
+                },{
+                        .type   = CX88_VMUX_CABLE,
+                        .vmux   = 0,
+                        .gpio0  = 0x0f05,
+                },{
+                        .type   = CX88_VMUX_COMPOSITE1,
+                        .vmux   = 1,
+                        .gpio0  = 0x0f00,
+                },{
+                        .type   = CX88_VMUX_SVIDEO,
+                        .vmux   = 2,
+                        .gpio0  = 0x0f00,
+                }},
+#if 0
+                .ts             = {
+                         .type   = CX88_TS,
+                         .gpio0  = 0x00000f01,   /* Hooked to tuner reset bit */
+                 }
+#endif
+        },
         [CX88_BOARD_HAUPPAUGE_DVB_T1] = {
                 .name           = "Hauppauge Nova-T DVB-T",
 		.tuner_type     = TUNER_ABSENT,
@@ -673,6 +700,10 @@ struct cx88_subid cx88_subids[] = {
 		.subdevice = 0xd810,
 		.card      = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD,
 	},{
+		.subvendor = 0x18ac,
+		.subdevice = 0xd820,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q,
+	},{
 		.subvendor = 0x18AC,
 		.subdevice = 0xDB00,
 		.card      = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1,
drivers/media/video/cx88/cx88.h +1 -0
diff -puN a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
@@ -162,6 +162,7 @@ extern struct sram_channel cx88_sram_cha
 #define CX88_BOARD_HAUPPAUGE_ROSLYN        24
 #define CX88_BOARD_DIGITALLOGIC_MEC	       25
 #define CX88_BOARD_IODATA_GVBCTV7E         26
+#define CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q    27
 
 enum cx88_itype {
 	CX88_VMUX_COMPOSITE1 = 1,