Transparent proxy to remote squid box
Hi,
I have a working "transparent proxy to remote squid box" rules as below: -
$IPTABLES -t nat -A PREROUTING -i eth1 -s ! 10.59.2.4 -p tcp --dport 80 -j DNAT --to 10.59.2.4:3128 $IPTABLES -t nat -A POSTROUTING -o eth1 -s 10.59.2.0/24 -d 10.59.2.4 -j SNAT --to 10.59.2.1 $IPTABLES -t filter -A FORWARD -s 10.59.2.0/24 -d 10.59.2.4 -i eth1 -o eth1 -p tcp --dport 3128 -j ACCEPT
How can I not route the following network "1.1.1.0/24" to the remote squid box using IPTABLES?
Regards,
ro0ot
Quoted 9 lines · ro0ot wrote:
Hi,
I have a working "transparent proxy to remote squid box" rules as below: -
$IPTABLES -t nat -A PREROUTING -i eth1 -s ! 10.59.2.4 -p tcp --dport 80 -j DNAT --to 10.59.2.4:3128 $IPTABLES -t nat -A POSTROUTING -o eth1 -s 10.59.2.0/24 -d 10.59.2.4
-j SNAT --to 10.59.2.1
$IPTABLES -t filter -A FORWARD -s 10.59.2.0/24 -d 10.59.2.4 -i eth1 -o eth1 -p tcp --dport 3128 -j ACCEPT
Quoted 6 lines
How can I not route the following network "1.1.1.0/24" to the remote squid box using IPTABLES?
Regards,
ro0ot
Hello,
U can put 1 rule above the DNAT like this:
$IPTABLES -t nat -A PREROUTING -i eth1 -s 1.1.1.0/24 -p tcp --dport 80 -j ACCEPT $IPTABLES -t nat -A PREROUTING -i eth1 -s ! 10.59.2.4 -p tcp --dport 80 -j DNAT --to 10.59.2.4:3128
The first rule matches the requests coming from 1.1.1.0/24 to tcp port 80 and accepts them, e.g. the packets won't hit the next rule.
P.S.
you probably meant 10.1.1.0/24 ?
regards,
Georgi Alexandrov
Quoted 26 lines · Georgi Alexandrov
Quoted 10 lines · ro0ot wrote:
Hi,
I have a working "transparent proxy to remote squid box" rules as below: -
$IPTABLES -t nat -A PREROUTING -i eth1 -s ! 10.59.2.4 -p tcp --dport 80 -j DNAT --to 10.59.2.4:3128 $IPTABLES -t nat -A POSTROUTING -o eth1 -s 10.59.2.0/24 -d 10.59.2.4
-j SNAT --to 10.59.2.1
$IPTABLES -t filter -A FORWARD -s 10.59.2.0/24 -d 10.59.2.4 -i eth1
-o eth1 -p tcp --dport 3128 -j ACCEPTQuoted 6 lines
How can I not route the following network "1.1.1.0/24" to the remote squid box using IPTABLES?
Regards,
ro0otHello,
U can put 1 rule above the DNAT like this:
$IPTABLES -t nat -A PREROUTING -i eth1 -s 1.1.1.0/24 -p tcp --dport 80
-j ACCEPT
$IPTABLES -t nat -A PREROUTING -i eth1 -s ! 10.59.2.4 -p tcp --dport 80 -j DNAT --to 10.59.2.4:3128
Quoted 9 lines
The first rule matches the requests coming from 1.1.1.0/24 to tcp port 80 and accepts them, e.g. the packets won't hit the next rule.
P.S.
you probably meant 10.1.1.0/24 ?regards,
Georgi Alexandrov
For the sake of completeness - you can also you the RETURN target in the first rule, that will cause packets not to travel this chain anymore and hit the chain's default policy. In most cases it's "ACCEPT" so the RETURN target will do, if the chain's policy is DROP you should use the ACCEPT target in the first rule.
regards,
Georgi Alexandrov