Skip to contentSkip to conversation

What ethernet driver to use in 2.6.8.1 instead of gianfar in 2.6.11.x?

DISCUSSION Clemens Koller 2 participants 3 messages May 17, 2005

lore
Share & tools
lore
#0 lore raw

Hello, again,

for some tests and glibc-builds I want to work with a 2.6.8.1 kernel temporarily on a freescale mpc8540.

In 2.6.8.1 there was no gianfar ethernet driver. Is it okay to use the fec drivers instead of the gianfar or is it better to put the gianfar drivers back into 2.6.8.1? (100Mbps are okay for that testing)

Maybe somebody can get me a working .config for 2.6.8.1 and mpc8540ads?

Thanks in advance,

Clemens Koller
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany

http://www.anagramm.de
Phone: +49-89-741518-50
Fax: +49-89-741518-19

#1 lore raw
Quoted 4 lines · Clemens Koller

Hello, again,

for some tests and glibc-builds I want to work with a 2.6.8.1 kernel
temporarily on a freescale mpc8540.

Out of interest, what issues did you have with 2.6.11.x?

Quoted 3 lines

In 2.6.8.1 there was no gianfar ethernet driver. Is it okay to use the
fec drivers instead of the gianfar or is it better to put the gianfar drivers back into 2.6.8.1? (100Mbps are okay for that testing)

I doubt fec drivers would ever work for the TSECs. You should be able to pull the driver code out of 2.6.11.x for gianfar back into 2.6.8.1 w/o any real issue.

Quoted 1 line

Maybe somebody can get me a working .config for 2.6.8.1 and mpc8540ads?

Can you start with the .config file that exists in the 2.6.11 ?

- kumar

#2 lore raw

Hello, Kumar!

Quoted 4 lines
Quoted 2 lines

for some tests and glibc-builds I want to work with a 2.6.8.1 kernel
temporarily on a freescale mpc8540.

Out of interest, what issues did you have with 2.6.11.x?

I want to see if I can get more details out of failing glibc-2.3.{4,5} ntpl tests on a running system. That's not related to anything mpc85xx specific.

I'll take the gianfar if necessary.
(Or I just plug a rtl8139 into pci... and go with that) The .config is not an issue, then. Thanks!

Greets,

Clemens Koller
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany

http://www.anagramm.de
Phone: +49-89-741518-50
Fax: +49-89-741518-19

Quoted 15 lines · Kumar Gala
Quoted 3 lines

In 2.6.8.1 there was no gianfar ethernet driver. Is it okay to use the
fec drivers instead of the gianfar or is it better to put the gianfar drivers back into 2.6.8.1? (100Mbps are okay for that testing)

I doubt fec drivers would ever work for the TSECs. You should be able to pull the driver code out of 2.6.11.x for gianfar back into 2.6.8.1 w/o any real issue.

Quoted 1 line

Maybe somebody can get me a working .config for 2.6.8.1 and mpc8540ads?

Can you start with the .config file that exists in the 2.6.11 ?

- kumar