Detecting link up
Hi all,
I need to detect when an interface (wired ethernet) has link up/down. Is there a system signal which is sent when this happens? What is the best way to this programatically?
Best Regards
Filipe
Signature · 9 lines
Filipe Lameiro Abrantes INESC Porto Campus da FEUP Rua Dr. Roberto Frias, 378 4200-465 Porto Portugal Phone: +351 22 209 4266 E-mail: [email protected]
On Wed, 18 May 2005 11:35:12 +0100
Filipe Abrantes <[email protected]> bubbled:
Quoted 5 lines
Hi all,
I need to detect when an interface (wired ethernet) has link up/down. Is there a system signal which is sent when this happens? What is the best way to this programatically?
mii-tool?
Signature · 7 lines
MyExcuse: Not enough interrupts Martin Zwickel <[email protected]> Research & Development TechnoTrend AG <http://www.technotrend.de>
try looking at the ioctls which mii-tool / ethtool make
regards,
Vaibhav
Quoted 22 lines · Martin Zwickel
On Wed, 18 May 2005 11:35:12 +0100
Filipe Abrantes <[email protected]> bubbled:Quoted 5 lines
Hi all,
I need to detect when an interface (wired ethernet) has link up/down. Is there a system signal which is sent when this happens? What is the best way to this programatically?
mii-tool?
--
MyExcuse:
Not enough interruptsMartin Zwickel <[email protected]>
Research & DevelopmentTechnoTrend AG <http://www.technotrend.de>
Quoted 26 lines · Vaibhav Nivargi
try looking at the ioctls which mii-tool / ethtool make
regards,
VaibhavQuoted 20 lines · Martin Zwickel
On Wed, 18 May 2005 11:35:12 +0100
Filipe Abrantes <[email protected]> bubbled:Quoted 5 lines
Hi all,
I need to detect when an interface (wired ethernet) has link up/down. Is there a system signal which is sent when this happens? What is the best way to this programatically?
mii-tool?
--
MyExcuse:
Not enough interruptsMartin Zwickel <[email protected]>
Research & DevelopmentTechnoTrend AG <http://www.technotrend.de>
Cut from some working project........
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <signal.h>
#include <errno.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <stdint.h>
#include <net/if.h>
#include <netinet/in.h>
typedef uint32_t u32;
typedef uint16_t u16;
typedef uint8_t u8;
#include <linux/sockios.h>
#include <linux/ethtool.h>
// -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= // // Get the link status. This returns TRUE if the link is up and FALSE // otherwise.
//int32_t link_stat()
{
int s;
struct ifreq ifr;
struct ethtool_value eth;
if((s = socket(AF_INET, SOCK_DGRAM, IPPROTO_IP)) == FAIL)
ERRORS(Socket);
bzero(&ifr, sizeof(ifr));
strcpy(ifr.ifr_name, Eth0);
ifr.ifr_data = (caddr_t) ð
eth.cmd = ETHTOOL_GLINK;
if(ioctl(s, SIOCETHTOOL, &ifr) == FAIL)
ERRORS(Ioctl);
(void)close(s);
return (eth.data) ? TRUE:FALSE;
}ERRORS, TRUE, FALSE, Eth0, FAIL are macros that you should be able to figure out for yourself. Maybe you don't have bzero() you can use memset(x, 0x00, n).
Cheers,
Dick Johnson
Penguin : Linux version 2.6.11.9 on an i686 machine (5537.79 BogoMips).
Notice : All mail here is now cached for review by Dictator Bush.
98.36% of all statistics are fiction.
Quoted 7 lines · Martin Zwickel
On Wed, 18 May 2005 11:35:12 +0100
Filipe Abrantes <[email protected]> bubbled:Quoted 3 lines
I need to detect when an interface (wired ethernet) has link up/down. Is there a system signal which is sent when this happens? What is the best way to this programatically?
mii-tool?
A thought on a related topic:
When a NIC driver knows that there is no link, why does it even try to transmit a packet? It could return immediately with an error code, without applications having to wait for a timeout.
(I had a quick peek at two drivers, and they don't check the link status)
Max
Am Mittwoch, 18. Mai 2005 16:37 schrieb Max Kellermann:
Quoted 5 lines
A thought on a related topic:
When a NIC driver knows that there is no link, why does it even try to transmit a packet? It could return immediately with an error code, without applications having to wait for a timeout.
That would be a duplication of work. If the driver provides link detection the network core could check for it.
Regards
Oliver
Quoted 9 lines · Max Kellermann
Quoted 7 lines · Martin Zwickel
On Wed, 18 May 2005 11:35:12 +0100
Filipe Abrantes <[email protected]> bubbled:Quoted 3 lines
I need to detect when an interface (wired ethernet) has link up/down. Is there a system signal which is sent when this happens? What is the best way to this programatically?
mii-tool?
Quoted 8 lines
A thought on a related topic:
When a NIC driver knows that there is no link, why does it even try to transmit a packet? It could return immediately with an error code, without applications having to wait for a timeout.
(I had a quick peek at two drivers, and they don't check the link status)
An NIC driver doesn't know if there's other links or not. One NIC driver is for one type of NIC. And there's also interface lo.
Signature · 2 lines
Coywolf Qi Hunt http://sosdg.org/~coywolf/
Quoted 11 lines · Max Kellermann
Quoted 7 lines · Martin Zwickel
On Wed, 18 May 2005 11:35:12 +0100
Filipe Abrantes <[email protected]> bubbled:Quoted 3 lines
I need to detect when an interface (wired ethernet) has link up/down. Is there a system signal which is sent when this happens? What is the best way to this programatically?
mii-tool?
A thought on a related topic:
Quoted 8 lines
When a NIC driver knows that there is no link, why does it even try to transmit a packet? It could return immediately with an error code, without applications having to wait for a timeout.
(I had a quick peek at two drivers, and they don't check the link status)
Max
The driver(s) don't transmit directly. They put data into a buffer, usually a ring. The hardware will (depends upon the type) try to transmit up to 16 times, anything at the current buffer location. This allows hardware, not software, to try to get a packet on the wire. The wire can become active or inactive at any time. Usually the driver correctly assumes that the packet will eventually get out. If it doesn't, upper levels will send it again. Note that this is Ethernet, a noisy channel, sh* happens. If the protocol is connection oriented, the data will be retried forever in an attempt to get it through. Otherwise, the data is just dropped on the floor. That's how networking works. You don't waste valuable CPU resources checking to see if data got onto a wire when it might get trashed later anyway.
Cheers,
Dick Johnson
Penguin : Linux version 2.6.11.9 on an i686 machine (5537.79 BogoMips).
Notice : All mail here is now cached for review by Dictator Bush.
98.36% of all statistics are fiction.
Quoted 10 lines · Martin Zwickel
On Wed, 18 May 2005 11:35:12 +0100
Filipe Abrantes <[email protected]> bubbled:Quoted 5 lines
Hi all,
I need to detect when an interface (wired ethernet) has link up/down. Is there a system signal which is sent when this happens? What is the best way to this programatically?
mii-tool?
BTW, it might be a good idea to trigger some hotplug event on interface up/down... or just send a netlink message. instead of polling the interface. The same applies to removable media too (CD or ZIP drive).
/mjt
Quoted 9 lines · Filipe Abrantes
Hi all,
I need to detect when an interface (wired ethernet) has link up/down. Is there a system signal which is sent when this happens? What is the best way to this programatically?
Best Regards
Filipe
The best way is to open a netlink socket and look for the mesaages about
link up/down there. Read iproute2 http://developer.osdl.org/dev/iproute2 source for ip command (ipmonitor.c).
This works for almost all devices unlike ethtool and mii which only work on a small subset of devices.
Quoted 14 lines · Stephen Hemminger
Quoted 11 lines · Filipe Abrantes
Hi all,
I need to detect when an interface (wired ethernet) has link up/down. Is there a system signal which is sent when this happens? What is the best way to this programatically?
Best Regards
Filipe
Quoted 6 lines
The best way is to open a netlink socket and look for the mesaages about link up/down there. Read iproute2 http://developer.osdl.org/dev/iproute2
source for ip command (ipmonitor.c).This works for almost all devices unlike ethtool and mii which only work on a small subset of devices.
And libnl is a very good library to get just that information without the need to manually parse netlink messages.
Baruch