Skip to contentSkip to conversation

PlugSched-5.0 for 2.6.11, 2.6.12-rc4 and 2.6.12-rc4-mm2

RFC Peter Williams 2 participants 3 messages May 24, 2005

lore
Share & tools
lore
#0 lore raw

A patch of PlugSched-5.0 (containing ingosched, nicksched, staircase, spa_no_frills and zaphod CPU schedulers) against a 2.6.11 kernel is available for download from:

<http://prdownloads.sourceforge.net/cpuse/plugsched-5.0-for-2.6.11.patch?download>

for 2.6.12-rc4 at:

<http://prdownloads.sourceforge.net/cpuse/plugsched-5.0-for-2.6.12-rc4.patch?download>

and for 2.6.12-rc4-mm2 at:

<http://prdownloads.sourceforge.net/cpuse/plugsched-5.0-for-2.6.12-rc4-mm2.patch?download>

PlugSched's version number has been bumped to 5.0 as further reductions
in the scheduler drive interface have been introduced. Con Kolivas's "nice" aware load balancing patch has also been applied.

Peter

Signature · 4 lines
Peter Williams                                   [email protected]

"Learning, n. The kind of ignorance distinguishing the studious."
 -- Ambrose Bierce
#1 lore raw
Quoted 3 lines · Peter Williams

A patch of PlugSched-5.0 (containing ingosched, nicksched, staircase, spa_no_frills and zaphod CPU schedulers) against a 2.6.11 kernel is available for download from:

Does it have any documentation ?

#2 lore raw
Quoted 8 lines · Søren Lott
Quoted 3 lines · Peter Williams

A patch of PlugSched-5.0 (containing ingosched, nicksched, staircase, spa_no_frills and zaphod CPU schedulers) against a 2.6.11 kernel is available for download from:

Does it have any documentation ?

Only that in th KConfig files. :-(

It's fairly simple really. You can select a default scheduler at kernel build time. If you wish to boot with a scheduler other than the default it can be selected at boot time by adding:

cpusched=<scheduler>

to the boot command line where <scheduler> is one of: ingosched, nicksched, staircase, spa_no_frills or zaphod. If you don't change the default when you build the kernel the default scheduler will be ingosched (which is the normal scheduler).

The scheduler in force on a running system can be determined by the contents of:

/proc/scheduler

Control parameters for the scheduler can be read/set via files in:

/sys/cpusched/<scheduler>/

Peter

Signature · 4 lines
Peter Williams                                   [email protected]

"Learning, n. The kind of ignorance distinguishing the studious."
 -- Ambrose Bierce