Skip to contentSkip to conversation

fdomain SCSI driver broken in 2.6 series?

DISCUSSION Christian Trefzer 2 participants 3 messages May 30, 2005 – Jun 7, 2005

lore
Share & tools
lore
#0 lore raw

Hi everyone,
does anybody remember the state of the future domain driver in the current 2.6 kernel? I tried to find some pointers to the cause of an Oops I get every time during insmod with any 2.6 kernel, booting e.g. from two versions of the Gentoo installation CD and Knoppix, while the 2.4 version of the driver detects the card and attached disk just fine. Even a self-made grub boot cd containing 2.6.11.10 and some userland as initramfs shows the same beahviour.

I am trying to get an ancient ISA adaptor to work, namely a Future Domain 1860 w/ 18C30 Chip, if I recall correctly. The card is detected properly at base 0x140, irq 11, and the scsi_eh_0 thread is launched as well. But even before the disk is detected, the problem occurs.

Unfortunately, I am currently away from the box in question, and did not manage to extract any further information so far. Any hints would be appreciated, and if I can provide some information that would actually be of any use, please let me know.

Thanks in advance,
Chris

#1 lore raw
Quoted 4 lines · Christian Trefzer

I am trying to get an ancient ISA adaptor to work, namely a Future Domain 1860 w/ 18C30 Chip, if I recall correctly. The card is detected properly at base 0x140, irq 11, and the scsi_eh_0 thread is launched as well. But even before the disk is detected, the problem occurs.

I did a bit of cleanup on it during 2.5 to get it to compile and look right, and it did work for a while when I had the card, but the scsi changed a lot after that. You are the first fdomain user I've seen in years so I suspect you are on your own for fixing it too tho I can try and help a bit.

#2 lore raw
Quoted 6 lines · Alan Cox

I did a bit of cleanup on it during 2.5 to get it to compile and look right, and it did work for a while when I had the card, but the scsi changed a lot after that. You are the first fdomain user I've seen in years so I suspect you are on your own for fixing it too tho I can try and help a bit.

Guess I'm the only person insane enough to try and build a DSL router based on 2.6 with ancient SCSI disks on an ISA controller, but I just can't live without some of the features anymore which 2.4 still lacks.

In the meantime, I worked around the Oops by using a tiny disk on the onboard IDE controller, but I wouldn't quite call removing the card a fix for the problem.

The thing is, I have no real experience in C programming, although I sometimes read a little kernel source code and stuff. Right now I have a bit of trouble with my studies, but once that's settled I can do some reading about SCSI, Linux, the works. Doesn't seem to be anyone using 2.6 with Future Domain cards anyway, so I'm not in a hurry. But just for completeness, it would be nice to have that driver cleaned up. It's in Linux' tree, after all. I'll build a testing box with ISA bus some time soon and try some debugging.

Thanks for your time : )