Skip to contentSkip to conversation

2.6.12-rc5/2.6.12-rc5-git8 USB problems

DISCUSSION Sid Boyce 2 participants 2 messages Jun 3, 2005 – Jun 4, 2005

lore
Share & tools
lore

Sid Boyce

author
#0 lore raw

Everything works OK on 2.6.12-rc4. The joysticks are seen by lsusb and the joystick test programs, but the controls do nothing in 2.6.12-rc5 and 2.6.12-rc5-git8.

# js_demo
Joystick test program.
~~~~~~~~~~~~~~~~~~~~~~
Joystick 0: "CH PRODUCTS CH FLIGHT SIM YOKE USB "
Joystick 1: "CH PRODUCTS CH PRO PEDALS USB "
# jscal /dev/js0
Joystick has 7 axes and 13 buttons.
Correction for axis 0 is broken line, precision is 0.
Coeficients are: 127, 127, 5534751, 5534751
Correction for axis 1 is broken line, precision is 0.
Coeficients are: 127, 127, 5534751, 5534751
Correction for axis 2 is broken line, precision is 0.
Coeficients are: 127, 127, 5534751, 5534751
Correction for axis 3 is broken line, precision is 0.
Coeficients are: 127, 127, 5534751, 5534751
Correction for axis 4 is broken line, precision is 0.
Coeficients are: 127, 127, 5534751, 5534751
Correction for axis 5 is broken line, precision is 0.
Coeficients are: 0, 0, 536870912, 536870912
Correction for axis 6 is broken line, precision is 0.
Coeficients are: 0, 0, 536870912, 536870912

Regards
Sid.

Signature · 3 lines
Sid Boyce ... Hamradio License G3VBV, Keen licensed Private Pilot
Retired IBM Mainframes and Sun Servers Tech Support Specialist
Microsoft Windows Free Zone - Linux used for all Computing Tasks
#1 lore raw
Quoted 10 lines · Sid Boyce

Everything works OK on 2.6.12-rc4. The joysticks are seen by lsusb and the joystick test programs, but the controls do nothing in 2.6.12-rc5 and 2.6.12-rc5-git8.

# js_demo
Joystick test program.
~~~~~~~~~~~~~~~~~~~~~~
Joystick 0: "CH PRODUCTS CH FLIGHT SIM YOKE USB "
Joystick 1: "CH PRODUCTS CH PRO PEDALS USB "
Quoted 17 lines
# jscal /dev/js0
Joystick has 7 axes and 13 buttons.
Correction for axis 0 is broken line, precision is 0.
Coeficients are: 127, 127, 5534751, 5534751
Correction for axis 1 is broken line, precision is 0.
Coeficients are: 127, 127, 5534751, 5534751
Correction for axis 2 is broken line, precision is 0.
Coeficients are: 127, 127, 5534751, 5534751
Correction for axis 3 is broken line, precision is 0.
Coeficients are: 127, 127, 5534751, 5534751
Correction for axis 4 is broken line, precision is 0.
Coeficients are: 127, 127, 5534751, 5534751
Correction for axis 5 is broken line, precision is 0.
Coeficients are: 0, 0, 536870912, 536870912
Correction for axis 6 is broken line, precision is 0.
Coeficients are: 0, 0, 536870912, 536870912

The consensus from Dmitry and Vojtech is that this could be either USB or an input layer problem, but nothing changed in [UO]HCI or HID between the two mentioned versions.

So this is more likely a recent regression in the USB code. Could someone please grab it while it's fresh?