Possibility of copying over fdb entries.
Hi, all,
I wish to copy over fdb(forwarding database entries) learnt over from one interface onto as they are from another interface.
Like for eg :
brctl showmacs br0
port no mac addr is local? ageing timer
1 00:30:1a:01:6f:e4 no 0.46 1 00:30:1a:1c:3d:b7 yes 0.00 2 00:30:1a:1c:3d:b8 yes 0.00
Instead of the above in line 1 if i wish to forcefully add mac " 00:30:1a:01:6f:e4 " from port 2 instated of port 1.
Do i need to create a separate ioctl for it from the brctl to the kernel code or is thier some provision for doing it.
Regards,
Munro.
Quoted 9 lines · On Tue, 28 Jun 2005 14:40:34 +0800 munro <[email protected]> wrote:
Hi, all,
I wish to copy over fdb(forwarding database entries) learnt over from one interface onto as they are from another interface.
Like for eg :
brctl showmacs br0
Quoted 7 lines
port no mac addr is local? ageing timer 1 00:30:1a:01:6f:e4 no 0.46 1 00:30:1a:1c:3d:b7 yes 0.00 2 00:30:1a:1c:3d:b8 yes 0.00Instead of the above in line 1 if i wish to forcefully add mac " 00:30:1a:01:6f:e4 " from port 2 instated of port 1.
Why? What reason.
Quoted 2 lines
Do i need to create a separate ioctl for it from the brctl to the kernel code or is thier some provision for doing it.
Since all enhancements can be 2.6 only,
I would prefer a sysfs interface to an ioctl to do this.
You can add a store/write interface to /sys/class/net/brX/bridge/brforward file. The creative part is figuring out what the semantics should be and getting the locking right.
Hi,
What is wish to do is
There are four interfaces here
PC1---------------------| br0
|if0-------------------if2| br1 | ----------------------PC2
|
|if1------------------- if3| |br0 and br1- are two transperent bridges on separate devices.
if0 and if1 are two physical interfaces(ports) attached to each of the bridges on either side.
What i intend to do is to redirect all traffic coming towards br0 from PC1 through interface/port if1, even if the source mac is learnt through if0 and the same on the other bridge br1 on the other device. Similarly, any traffic coming from PC2 has to go through if2 instead of if3 before it enters br0. So in all, what i want to do is make the link from br0 to br1 full duplex if the physical links are half-duplex.
Regards,
Munro.
Quoted 35 lines · Stephen Hemminger
Quoted 4 lines · On Tue, 28 Jun 2005 14:40:34 +0800 munro <[email protected]> wrote:
Hi, all,
I wish to copy over fdb(forwarding database entries) learnt over from one interface onto as they are from another interface.
Quoted 10 lines
Like for eg :
brctl showmacs br0
port no mac addr is local? ageing timer1 00:30:1a:01:6f:e4 no 0.46 1 00:30:1a:1c:3d:b7 yes 0.00 2 00:30:1a:1c:3d:b8 yes 0.00Instead of the above in line 1 if i wish to forcefully add mac " 00:30:1a:01:6f:e4 " from port 2 instated of port 1.
Why? What reason.
Quoted 3 lines
Do i need to create a separate ioctl for it from the brctl to the kernel code or is thier some provision for doing it.
Since all enhancements can be 2.6 only,
I would prefer a sysfs interface to an ioctl to do this.
You can add a store/write interface to/sys/class/net/brX/bridge/brforwardfile. The creative part is figuring out what the semantics should be and getting the locking right.
Quoted 22 lines · On Wed, 29 Jun 2005 11:41:59 +0800 munro <[email protected]> wrote:
Hi,
What is wish to do is
There are four interfaces herePC1---------------------| br0 |if0-------------------if2| br1 | ----------------------PC2 | |if1------------------- if3| |br0 and br1- are two transperent bridges on separate devices. if0 and if1 are two physical interfaces(ports) attached to each of the bridges on either side.
What i intend to do is to redirect all traffic coming towards br0 from PC1 through interface/port if1, even if the source mac is learnt through if0 and the same on the other bridge br1 on the other device. Similarly, any traffic coming from PC2 has to go through if2 instead of if3 before it enters br0. So in all, what i want to do is make the link from br0 to br1 full duplex if the physical links are half-duplex.
Quoted 2 lines
Regards,
Munro.
That would create a possible loop if the links are full duplex, and that would be a disaster! Maybe you could do what you want with the bonding interface?
Hi,
How would it cause a loop. what i am trying is to possibly prevent a loop without using stp.
And Please let me know how bonding will help. I am a newbie in this arena.
regards
Quoted 31 lines · Stephen Hemminger
Quoted 11 lines · On Wed, 29 Jun 2005 11:41:59 +0800 munro <[email protected]> wrote:
Hi,
What is wish to do is
There are four interfaces herePC1---------------------| br0 |if0-------------------if2| br1 | ----------------------PC2 | |if1------------------- if3| |Quoted 9 lines
br0 and br1- are two transperent bridges on separate devices.
if0 and if1 are two physical interfaces(ports) attached to each of the bridges on either side.What i intend to do is to redirect all traffic coming towards br0 from PC1 through interface/port if1, even if the source mac is learnt through if0 and the same on the other bridge br1 on the other device. Similarly, any traffic coming from PC2 has to go through if2 instead of if3 before it enters br0. So in all, what i want to do is make the link from br0 to br1 full duplex if the physical links are half-duplex.
Regards,
Munro.That would create a possible loop if the links are full duplex, and that would be a disaster! Maybe you could do what you want with the bonding interface?