Skip to contentSkip to conversation

udev booting problem

DISCUSSION Farkas Levente 2 participants 2 messages Jul 11, 2005

lore
Share & tools
lore
#0 lore raw

hi,
we've got a MSI E7500 motherboard with one xeon 1.8 processor and 1GB ram. after we upgrade to centos 4.1 (aka. rhel 4) kernel-2.6.9-11.EL, udev-039-10.8.EL4 the system is no longer boot (with centos 3.5 aka rhel 3 it works).
ie. start to boot the kernel and at udev we've got
------------------------------
Starting udev:
Initializing hardware....
------------------------------
after about one minutes or more we got:
------------------------------
Starting udev:
Initializing hardware....Disabling IRQ #11
------------------------------
and the boot process stops. and we can't find any solution. the strange thing we have a same motherboard with 2 processor and that boot. the only difference is that this new machince was installed on a different hardware and the disk was just plug into the machine, while the other machince was installed on it's own original hardware configuration.
can you help me or do you has any tipp, advice?
thanks in advance.
yours.

Signature · 14 lines
   Levente                               "Si vis pacem para bellum!"




-------------------------------------------------------
This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening
July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual
core and dual graphics technology at this free one hour event hosted by HP,
AMD, and NVIDIA.  To register visit http://www.hp.com/go/dualwebinar
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
#1 lore raw
Quoted 14 lines · Farkas Levente

hi,
we've got a MSI E7500 motherboard with one xeon 1.8 processor and 1GB ram. after we upgrade to centos 4.1 (aka. rhel 4) kernel-2.6.9-11.EL, udev-039-10.8.EL4 the system is no longer boot (with centos 3.5 aka rhel 3 it works).
ie. start to boot the kernel and at udev we've got
------------------------------
Starting udev:
Initializing hardware....
------------------------------
after about one minutes or more we got:
------------------------------
Starting udev:
Initializing hardware....Disabling IRQ #11

Quoted 8 lines

------------------------------
and the boot process stops. and we can't find any solution. the strange thing we have a same motherboard with 2 processor and that boot. the only difference is that this new machince was installed on a different hardware and the disk was just plug into the machine, while the other machince was installed on it's own original hardware configuration.
can you help me or do you has any tipp, advice?

The problem sounds more like a distro specific issue. You may better look for help at a distro-specific list.

Kay

-------------------------------------------------------
This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual core and dual graphics technology at this free one hour event hosted by HP, AMD, and NVIDIA. To register visit http://www.hp.com/go/dualwebinar
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel