Skip to contentSkip to conversation

PS/2 mouse not working

DISCUSSION Sune Mølgaard 1 participant 2 messages Jul 12, 2005

lore
Share & tools
lore
#0 lore raw

Hi all.

I can't seem to get a new PS/2 mouse to give any input on 2.6.11.6. I have tried creating /dev/input/{mouse0,mouse1} apart from /dev/input/mice as per numbers in Documentation/devices.txt, and cat <device> gives no output when wiggling the mouse.

I have tried compiling psmouse as module and loading it, and I have tried compiling it into kernel. I have also chosen to have a /dev/psaux, that doesn't get any input either. Mouse seems to get detected, as per this snippet from dmesg:

...
mice: PS/2 mouse device common for all mice
...
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
...

Best regards,

Sune Mølgaard

Signature · 2 lines
Quitting vi is the most important command of that editor, and should be bound to something easy to type and available in all modes, for example the space bar.
- Per Abrahamsen
#1 lore raw
Quoted 1 line · Sune Mølgaard

I have tried compiling psmouse as module and loading it, and I have tried compiling it into kernel. I have also chosen to have a /dev/psaux, that doesn't get any input either. Mouse seems to get detected, as per this snippet from dmesg:

Oh yeah. I also tried an usb -> PS/2 converter on my current mouse to rule out a faulty mause. Same result...

/Sune

Signature · 3 lines
The tolerance of liberty can be maintained until complete federal and
state control by Catholics has been accomplished.
- Bishop O'Connor, Pittsburgh