Skip to contentSkip to conversation

NAPI (aka RX Polling) for natsemi?

DISCUSSION Daniel Higgins 3 participants 3 messages Jul 18, 2005 – Jul 22, 2005

lore
Share & tools
lore
#0 lore raw

hi all,
is there such a thing anywhere as a working patch to enable NAPI in the natsemi driver? or is someone working on one?

so far i have found two non-working patches, which i tried to get to work without success. one locks up the kernel, the other says "interrupt while polling". any help with these would be appreciated. the DP83815 (natsemi) are used a lot on embedded routers (soekris, wrap, routerboard) and since they all use a geode processor which isn't all that powerful, they get stuck in a livelock at around 50-60 mbits and reboot shortly after due to the watchdog

here's the patches i found if that can help anyone:
http://gnumonks.org/ftp/pub/patches/natsemi-napi.patch locks up the
kernel once it receives some packet (guessing it's stuck in polling mode.. )
http://www.spine-group.org/sources/natsemi.diff has "interrupts while
polling" messages and the throughput drops off to zero

cc me because i'm not subscribed

thanks for any help and pointers

#2 lore raw
Quoted 4 lines · Francois Romieu

Daniel Higgins <[email protected]> :
[napi for natsemi]

Can you please fill a bugzilla entry for it at bugzilla.kernel.org ?

It is bugzilla, not featurewishzilla. If some external patches cause problem I suggest to contact their authors.