Skip to contentSkip to conversation

Sound support (2), using hardware directly

DISCUSSION Stas Sergeev 2 participants 2 messages Jul 19, 2005 – Jul 21, 2005

lore
Share & tools
lore
#0 lore raw

Hello.

Quoted 1 line · Julius Schwartzenberg

Yes, I am aware of the MIDI support in Dosemu, but I thought it was only for General Midi compatibility.

No. On the software synth side, midid have the -m option which will give you some basic mt32 support.
As for the directly passing the midi stream to the wavetable - this is also possible and described, and will allow you to use your AWE synth fully, provided it all goes via the mpu-401 in a pass-through mode (almost always this is the case).
So you can try and see if there are any differences with what you now have - there shouldn't be, but you won't need root, which is very important in some cases.

Quoted 2 lines

Sounds great! I'll watch the Dosemu
development and try things out when they get released :)

Well, the primary goal is to design the very simple but robust sound subsystem from zero, so that it won't depend on OSS, but can work also with ALSA and anything, and so that it can work with many more DOS progs than the current one does. But the OPL3, again, is not in the list of the primary targets:)
Of course porting the MAME OPL3 emulator to the planned sound system must be easy, but we'll see where this all will end up. It will probably take some time before something can be released though - the main problem is that the current code also happened to work somehow, and the replacement is possible only when the new code matches the current one in the functionality, which can take long enough.

#1 lore raw
Quoted 16 lines · Stas Sergeev
Quoted 1 line

Yes, I am aware of the MIDI support in Dosemu, but I thought it was only for General Midi compatibility.

No. On the software synth side, midid have the -m option which will give you some basic mt32 support.
As for the directly passing the midi stream to the wavetable - this is also possible and described, and will allow you to use your AWE synth fully, provided it all goes via the mpu-401 in a pass-through mode (almost always this is the case).
So you can try and see if there are any differences with what you now have - there shouldn't be, but you won't need root, which is very important in some cases.

Ah, I already suspected this. I'll try this out at some point and see if I'm able to hear a difference.

Quoted 10 lines

Well, the primary goal is to design the very simple but robust sound subsystem from zero, so that it won't depend on OSS, but can work also with ALSA and anything, and so that it can work with many more DOS progs than the current one does. But the OPL3, again, is not in the list of the primary targets:)
Of course porting the MAME OPL3 emulator to the planned sound system must be easy,

Quoted 8 lines

but we'll see where this all will end up. It will probably take some time before something can be released though - the main problem is that the current code also happened to work somehow, and the replacement is possible only when the new code matches the current one in the functionality, which can take long enough.

The current system seems to work pretty well for me, although it seems to soundquality could be a little bit higher in certain cases.
While OPL3 emulation would be really nice, wouldn't it be better to implement support for real OPL3 chips and emulate and OPL3 at another level in the system if one isn't availlable? Then also other applications such as FreeSCI and ScummVM would be able to make use of it.

About the new system. If the new code isn't comparable to the current code yet, maybe release 1.4 of Dosemu should still contain the old code? After that I think the development version could be switched over to the new code, even if it's not fully ready yet. Then it would already get more testing and it might be easier for development. It shouldn't be a big problem if a development version/tree has regressions.

I'm really looking forward to the new stuff.
Thanks,

Julius