Skip to contentSkip to conversation

Permission problems, Bluetooth Headset

Bluez-users Ola Benderius 3 participants 3 messages Jul 20, 2005 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hi,
got a problem when trying to connect my Bluetooth headset (it's a Plantronics 2500) with Linux.

I'm using Gentoo Linux so I followed the guide in this thread when pairing the device to the computer:
http://forums.gentoo.org/viewtopic-t-194183.html

I follow this guide and this is my hcid.conf:

/ #
# HCI daemon configuration file.
#
# $Id: hcid.conf,v 1.7 2004/12/13 14:16:03 holtmann Exp $ #

# HCId options
options {
# Automatically initialize new devices autoinit yes;

# Security Manager mode
# none - Security manager disabled
# auto - Use local PIN for incoming connections
# user - Always ask user for a PIN
#
security auto;

# Pairing mode
# none - Pairing disabled
# multi - Allow pairing with already paired devices
# once - Pair once and deny successive attempts
pairing multi;

# PIN helper
# pin_helper /usr/bin/bluepin;
pin_helper /etc/bluetooth/pin-helper;

# D-Bus PIN helper
#dbus_pin_helper;
}

# Default settings for HCI devices
device {
# Local device name
# %d - device id
# %h - host name
name "BlueZ at %h (%d)";

# Local device class
class 0x3e0100;

# Default packet type
#pkt_type DH1,DM1,HV1;

# Inquiry and Page scan
iscan enable; pscan enable;

# Default link mode
# none - no specific policy
# accept - always accept incoming connections
# master - become master on incoming connections,
# deny role switch on outgoing connections
lm accept;

# Default link policy
# none - no specific policy
# rswitch - allow role switch
# hold - allow hold mode
# sniff - allow sniff mode
# park - allow park mode
lp rswitch,hold,sniff,park;

# Authentication and Encryption (Security Mode 3) auth enable;
encrypt enable;
}/

But the PIN is set to '0000' since that the PIN of the headset. (according to the manual)

/ echo "0000" > /etc/bluetooth/pin/

With 'hcitool scan' I get:

/ Scanning ...

        00:03:89:B7:E5:F7       M2500 by Plantronics/

And with 'hcitool inq' I get:

/ Inquiring ...

        00:03:89:B7:E5:F7       clock offset: 0x623f    class: 0x200404/

So far so good. But now I get problems.

'l2ping 00:03:89:B7:E5:F7' returns this:

/ Can't connect: Permission denied/

8O

That ain't too good. I saved a hcidump for the l2ping and here it comes:

/ < HCI Command: Create Connection (0x01|0x0005) plen 13

Quoted 2 lines

HCI Event: Command Status (0x0f) plen 4
HCI Event: Link Key Request (0x17) plen 6

    < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
    > HCI Event: Command Complete (0x0e) plen 10
    > HCI Event: Connect Complete (0x03) plen 11/

Another thing I noticed was this. In the guide the 'hciconfig -a' command returned the following output:

/ hci0: Type: USB
BD Address: 00:10:60:A3:CB:41 ACL MTU: 192:8 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN AUTH ENCRYPT
RX bytes:125 acl:0 sco:0 events:17 errors:0
TX bytes:565 acl:0 sco:0 commands:17 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ at bluehat (0)'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing, Object
Transfer, Audio
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x1e7 LMP Ver: 1.1 (0x1) LMP
Subver: 0x1e7
Manufacturer: Cambridge Silicon Radio (10)/

Mine returned this:

/ hci0: Type: USB
BD Address: 00:0A:3A:51:BF:D7 ACL MTU: 192:8 SCO MTU: 64:8 UP RUNNING AUTH ENCRYPT
RX bytes:9060 acl:271 sco:0 events:332 errors:0 TX bytes:5093 acl:235 sco:0 commands:51 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ at turtlepond (0)'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP
Subver: 0x20d
Manufacturer: Cambridge Silicon Radio (10)/

There are some differences here. I'm thinking about PSCAN ISCAN and the service classes (mainly 'audio' since I got a headset). First I thought there was problems reading the hcid.conf file. But then I noticed that the 'Name' output was the one I set in that file. But still, might this be a problem?

This problem is really annoying and I would be happy if I got some help! Not even google can save me here...

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#1 lore raw

Hi Benderius, try this:

Change the line in hcid.conf where it is:

Quoted 1 line

lm accept;

And change it to:

Quoted 1 line

lm accept,master;

2005/7/20, Ola Benderius <[email protected]>:

Quoted 164 lines

Hi,
got a problem when trying to connect my Bluetooth headset (it's a Plantronics 2500) with Linux.
=20
I'm using Gentoo Linux so I followed the guide in this thread when pairing the device to the computer:
http://forums.gentoo.org/viewtopic-t-194183.html
=20
I follow this guide and this is my hcid.conf:
=20
/ #

    # HCI daemon configuration file.
    #
    # $Id: hcid.conf,v 1.7 2004/12/13 14:16:03 holtmann Exp $
    #

=20
# HCId options
options {
# Automatically initialize new devices autoinit yes;
=20
# Security Manager mode
# none - Security manager disabled
# auto - Use local PIN for incoming connections
# user - Always ask user for a PIN
#
security auto;
=20
# Pairing mode
# none - Pairing disabled
# multi - Allow pairing with already paired devices
# once - Pair once and deny successive attempts
pairing multi;
=20

            # PIN helper
            # pin_helper /usr/bin/bluepin;
            pin_helper /etc/bluetooth/pin-helper;
=20
            # D-Bus PIN helper
            #dbus_pin_helper;
    }

=20
# Default settings for HCI devices
device {
# Local device name
# %d - device id
# %h - host name
name "BlueZ at %h (%d)";
=20
# Local device class
class 0x3e0100;
=20
# Default packet type
#pkt_type DH1,DM1,HV1;
=20
# Inquiry and Page scan
iscan enable; pscan enable;
=20
# Default link mode
# none - no specific policy
# accept - always accept incoming connections
# master - become master on incoming connections,
# deny role switch on outgoing connections
lm accept;
=20
# Default link policy
# none - no specific policy
# rswitch - allow role switch
# hold - allow hold mode
# sniff - allow sniff mode
# park - allow park mode
lp rswitch,hold,sniff,park;
=20

            # Authentication and Encryption (Security Mode 3)
            auth enable;
            encrypt enable;
    }/

=20
But the PIN is set to '0000' since that the PIN of the headset. (according to the manual)
=20
/ echo "0000" > /etc/bluetooth/pin/
=20
With 'hcitool scan' I get:
=20
/ Scanning ...

        00:03:89:B7:E5:F7       M2500 by Plantronics/

=20
=20
And with 'hcitool inq' I get:
=20
/ Inquiring ...

        00:03:89:B7:E5:F7       clock offset: 0x623f    class: 0x200404/

=20
=20
So far so good. But now I get problems.
=20
'l2ping 00:03:89:B7:E5:F7' returns this:
=20
/ Can't connect: Permission denied/
=20
8O
=20
=20
That ain't too good. I saved a hcidump for the l2ping and here it comes:
=20
/ < HCI Command: Create Connection (0x01|0x0005) plen 13

Quoted 2 lines

HCI Event: Command Status (0x0f) plen 4
HCI Event: Link Key Request (0x17) plen 6

    < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
    > HCI Event: Command Complete (0x0e) plen 10
    > HCI Event: Connect Complete (0x03) plen 11/

=20
=20
Another thing I noticed was this. In the guide the 'hciconfig -a' command returned the following output:
=20
/ hci0: Type: USB
BD Address: 00:10:60:A3:CB:41 ACL MTU: 192:8 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN AUTH ENCRYPT
RX bytes:125 acl:0 sco:0 events:17 errors:0
TX bytes:565 acl:0 sco:0 commands:17 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ at bluehat (0)'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing, Object
Transfer, Audio
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x1e7 LMP Ver: 1.1 (0x1) LMP
Subver: 0x1e7
Manufacturer: Cambridge Silicon Radio (10)/
=20
=20
Mine returned this:
=20
/ hci0: Type: USB
BD Address: 00:0A:3A:51:BF:D7 ACL MTU: 192:8 SCO MTU: 64:8 UP RUNNING AUTH ENCRYPT
RX bytes:9060 acl:271 sco:0 events:332 errors:0 TX bytes:5093 acl:235 sco:0 commands:51 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ at turtlepond (0)'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP
Subver: 0x20d
Manufacturer: Cambridge Silicon Radio (10)/
=20
=20
There are some differences here. I'm thinking about PSCAN ISCAN and the service classes (mainly 'audio' since I got a headset). First I thought there was problems reading the hcid.conf file. But then I noticed that the 'Name' output was the one I set in that file. But still, might this be a problem?
=20
=20
This problem is really annoying and I would be happy if I got some help!

Quoted 8 lines

Not even google can save me here...
=20
=20
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=3D7477&alloc_id=3D16492&op=3Dclic=

k

Quoted 5 lines

_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
=20

--=20
Bruno de Oliveira Abinader
10LE/INdT - GVoIP/UFAM

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#2 lore raw
In reply to Ola Benderius

Hi Ola,

Quoted 39 lines · Ola Benderius

Hi,
got a problem when trying to connect my Bluetooth headset (it's a Plantronics 2500) with Linux.

I follow this guide and this is my hcid.conf:

#
# HCI daemon configuration file.
#
# $Id: hcid.conf,v 1.7 2004/12/13 14:16:03 holtmann Exp $ #

# HCId options
options {
# Automatically initialize new devices autoinit yes;

# Security Manager mode
# none - Security manager disabled
# auto - Use local PIN for incoming connections
# user - Always ask user for a PIN
#
security auto;

# Pairing mode
# none - Pairing disabled
# multi - Allow pairing with already paired devices
# once - Pair once and deny successive attempts
pairing multi;

# PIN helper
# pin_helper /usr/bin/bluepin;
pin_helper /etc/bluetooth/pin-helper;

# D-Bus PIN helper
#dbus_pin_helper;
}

Quoted 5 lines

But the PIN is set to '0000' since that the PIN of the headset. (according to the manual)

/ echo "0000" > /etc/bluetooth/pin/

what's pin-helper?
It's your script?
If yes, it must echo "PIN:0000", not only "0000".
typically:

#!/bin/bash
echo "PIN:0000"

Cheers,
Pizza

-------------------------------------------
Luca Pizzamiglio
CEFRIEL - Embedded Systems Design Unit
Via Fucini, 2 - 20133 MILANO (ITALY)
Phone: +39 02 23954 343
e-mail: [email protected]
ICQ: 5046978
-------------------------------------------

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users