Skip to contentSkip to conversation

Getting a kernel to run on AMCC 440EP (Bamboo)

DISCUSSION Frank Lautenbach 2 participants 2 messages Jul 25, 2005

lore
Share & tools
lore
#0 lore raw

Hi folks,

I want to bring up a linux kernel on the AMCC 440EP board (Bamboo). (still! ;-) )

I managed to compile the kernel sources from kernel.org (2.6.12.3) with a cross tool chain created with this great script from kegel.com (using demo-ppc440.sh). I set ARCH=ppc and CROSS_COMPILE=powerpc-440-linux-gnu- during the configuration procedure (using xconfig) as well as for the actual buil process. Of course, I also added the path to the ppc-crosstools to my PATH variable. Seems I did all that right, because the build process succeeded.

Finally I got an zImage.elf file (among some other variants) after the make process in .../arch/ppc/boot/images which I tried to load via TFTP of the PIBS ROM Monitor. After the image has been loaded into RAM I get
a lapidar "error: can not process ELF program header, status: command rc=-1" and that's it...

When I examine the image file with readelf everything seems to be all right. All data seems to be plausible and it is in fact a binary for PPC.

Anyhow seems to be wrong with the header format... Has anyone a guess what's the problem? Is PIBS not able to load kernel images at all? Or do I have to create another kind of image format?

By the way:

Do I have to rearrange the default memory mapping of this board to get at least some success with the linux kernel?

Thanks for your help and sorry for my lame questioning... I am just new to this domain...

Bests,
Frank

#1 lore raw
Quoted 21 lines · Frank Lautenbach

Hi folks,

I want to bring up a linux kernel on the AMCC 440EP board (Bamboo). (still! ;-) )

I managed to compile the kernel sources from kernel.org (2.6.12.3) with a cross tool chain created with
this great script from kegel.com (using demo-ppc440.sh). I set ARCH=ppc and CROSS_COMPILE=powerpc-440-linux-gnu-
during the configuration procedure (using xconfig) as well as for the actual buil process. Of course, I also
added the path to the ppc-crosstools to my PATH variable. Seems I did all that right, because the build process succeeded.

Finally I got an zImage.elf file (among some other variants) after the make process in .../arch/ppc/boot/images which I tried to load via TFTP of the PIBS ROM Monitor. After the image has been loaded into RAM I get
a lapidar "error: can not process ELF program header, status: command rc=-1" and that's it...

Quoted 9 lines

When I examine the image file with readelf everything seems to be all right. All data seems to be plausible
and it is in fact a binary for PPC.

Anyhow seems to be wrong with the header format... Has anyone a guess what's the problem? Is PIBS
not able to load kernel images at all? Or do I have to create another kind of image format?

Try PIBS specific image (made with mktree). This image has 'RPO' letters at the beginning.

Signature · 1 line
Eugene