Skip to contentSkip to conversation

sercice-based and ip-based shaping]

Fwd: Re: Vinod Chandran 1 participant 1 message Aug 2, 2005

lore
Share & tools
lore
#0 lore raw

Hi Mihai,

You could have a parent class based on services, then have children of that parent class based on ips. for eg,
lets say the root is 1:1,
have FTP service class as 1:2 , parent 1:1
and then have a child say 1:21, 1:22 and so on whose parent is 1:2.
I have used mark values to classify traffic.
As far as rate/ceil values are concerned..
have class 1:2 rate/ceil 128/512.
1:21 - 8/128
1:22 - 8/64 ..
and so on...

1:1(512)

        |
                                                                      
          |                                                             

--------------------------------------------------------------------------------------

| |

                      1:2(FTP)(128/512) 

1:3( Telnet)(384/512)

|                                                                                                            |
--------------------------------------                                                                        --------------------------
|                                              |                                                                        |                                |
1:21 (8/128)                        1:22 (8/64) 
                                                     1:31(128/384) 
          1:32(128/256)

Hope this helps you,
Regards,
Vinod C

Quoted 26 lines · Mihai Vlad

Hello guys,

I need to accomplish 2 tasks with one Linux router:

1) Shape the traffic based on services (e.g. HTTP max 512 kbps, P2P max 128 kbps - with a lower prio, etc)

2) After I have classified the traffic based on services, I want to pass it to the clients with different rates/ceils (one client will get 8/128 kbps, other 8/64 kbps, etc). If all the users are downloading via P2P I do not want the whole traffic to exceed the P2P service ceil (the 128 kbps - as stated before).

I know how to shape based on protocols and services. I know how to shape a connection based on IP's. But how do I combine the both? How should the Hierarchy look like.

Thanks in advance,

Mihai VLAD

Quoted 7 lines

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc