Touchpad errors
New SuSE 9.3 x86_64 install after HD crash. With 2.6.13-rc3 and up to 2.6.13-rc4-git4. I can't remember seeing these errors for quite a long time, thought they were fixed, perhaps there is a regression in recent kernels. It completely and rapidly fills up dmesg and /var/log/messages so I can't get other stuff I need to see.psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4
Regards
Sid.
Signature · 3 lines
Sid Boyce ... Hamradio License G3VBV, Keen licensed Private Pilot Retired IBM Mainframes and Sun Servers Tech Support Specialist Microsoft Windows Free Zone - Linux used for all Computing Tasks
Quoted 10 lines · Sid Boyce
New SuSE 9.3
x86_64install after HD crash. With 2.6.13-rc3 and up to 2.6.13-rc4-git4. I can't remember seeing these errors for quite a long time, thought they were fixed, perhaps there is a regression in recent kernels.
It completely and rapidly fills up dmesg and/var/log/messagesso I can't get other stuff I need to see.psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
Quoted 9 lines
psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4
Does it work with acpi=off?
Signature · 1 line
Dmitry
Hi.
I have the same issue on Acer Aspire 1520 notebook. On SuSE 9.3 system can not boot with acpi=off.
In 2.6.13-rc4-git4 this crazy touchpad jumps reports as:
warning: many lost ticks.
Your time source seems to be instable or some driver is hogging interupts rip handler_IRQ_event+0x20/0x60
and sometimes I can see
psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte N
This happens when some software check battery state or current cpu rate too often.
2005/8/2, Dmitry Torokhov <[email protected]>:
Quoted 31 lines · Sid Boyce
Quoted 10 lines
New SuSE 9.3
x86_64install after HD crash. With 2.6.13-rc3 and up to 2.6.13-rc4-git4. I can't remember seeing these errors for quite a long time, thought they were fixed, perhaps there is a regression in recent kernels.
It completely and rapidly fills up dmesg and/var/log/messagesso I can't get other stuff I need to see.psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1Quoted 9 lines
psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4Does it work with acpi=off?
--
Dmitry
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 2 lines · Dmitrij Bogush
This happens when some software check battery state or current cpu rate too often.
Acer laptops are notorious for buggy SMM implementations that disable interrupts for many timer ticks. Does it work any better with HZ=100?
Lee
Quoted 13 lines · Lee Revell
Quoted 2 lines · Dmitrij Bogush
This happens when some software check battery state or current cpu rate too often.
Acer laptops are notorious for buggy SMM implementations that disable interrupts for many timer ticks. Does it work any better with HZ=100?
Lee
The problem, initially at least, doesn't seem as sever at HZ=100, 18 occurrences in 3 mins 30 seconds. Regards
Sid.
Signature · 3 lines
Sid Boyce ... Hamradio License G3VBV, Keen licensed Private Pilot Retired IBM Mainframes and Sun Servers Tech Support Specialist Microsoft Windows Free Zone - Linux used for all Computing Tasks
Quoted 9 lines · Dmitrij Bogush
Hi.
I have the same issue on Acer Aspire 1520 notebook. On SuSE 9.3 system can not boot with acpi=off.
In 2.6.13-rc4-git4 this crazy touchpad jumps reports as:warning: many lost ticks.
Your time source seems to be instable or some driver is hogging interupts riphandler_IRQ_event+0x20/0x60
Quoted 7 lines
and sometimes I can see
psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte NThis happens when some software check battery state or current cpu rate too often.
Yes, that would do it. psmouse module drops received byte if it is delayed for more than 0.5 sec. On some machines getting batetry info takes a long time and all the time is spent in BIOS with interrupts disabled. That is why the data is split between state and info - one is static and takes much longer to access and other is more "dynamic" and is cheaper to access. Unfortunately some usespace tools check both and do that like every second.
You may try to talk to ACPI people; also I recommend setting battery polling interval to something sane, like 1 minute, and make sure your tool does not touch "info" file - that should help a bit.
Signature · 1 line
Dmitry
Quoted 2 lines
Acer laptops are notorious for buggy SMM implementations that disable interrupts for many timer ticks. Does it work any better with HZ=100?
Maybe, but I do not see any difference between 100 and 1000 hz on 2.6.13-rc5. With 2.6.13(from rc4) I do not get "crazy jumps" like in 2.6.12 or later, only freezes for 1 second.
Quoted 3 lines
You may try to talk to ACPI people; also I recommend setting battery polling interval to something sane, like 1 minute, and make sure your tool does not touch "info" file - that should help a bit.
Where can I find "ACPI people" ?
Thanks.
Quoted 23 lines · Dmitry Torokhov
Quoted 10 lines · Sid Boyce
New SuSE 9.3
x86_64install after HD crash. With 2.6.13-rc3 and up to 2.6.13-rc4-git4. I can't remember seeing these errors for quite a long time, thought they were fixed, perhaps there is a regression in recent kernels.
It completely and rapidly fills up dmesg and/var/log/messagesso I can't get other stuff I need to see.psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1Quoted 9 lines
psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4
Quoted 2 lines
Does it work with acpi=off?
It does not boot with SuSE 9.3 default kernel, 2.6.13-rc3 or 2.6.13-rc4-git4, locks up after an initial message with a blank screen. Acer 1501LCe x86_64 laptop.
Regards
Sid.
Signature · 3 lines
Sid Boyce ... Hamradio License G3VBV, Keen licensed Private Pilot Retired IBM Mainframes and Sun Servers Tech Support Specialist Microsoft Windows Free Zone - Linux used for all Computing Tasks