rfcomm connection for DUN is flaky
Hi all.
I am having a problem with rfcomm for dial-up networking. The hardware is:
Bluetooth hci_usb internal on Sony Vaio T2XP
Bluetooth on Nokia 6680
The software is:
Debian 3.1 + packages from unstable
bluez-hcidump 1.23-1
bluez-utils 2.18-1
bluez-pin 0.25-1
gnome-bluetooth 0.5.1-1 (from debian.usefulinc.com/gnome ./) libbluetooth1 2.18-1
kernel 2.6.12.3 + bluetooth modules
hciconfig reports:
Quoted 5 lines
hci0: Type: USB
BD Address: 00:01:4A:26:9C:04 ACL MTU: 192:8 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:157 acl:0 sco:0 events:21 errors:0 TX bytes:593 acl:0 sco:0 commands:21 errors:0
I have set up rfcomm channels for OBEX and DUN like this
Quoted 17 lines
rfcomm0 {
bind yes;
device 00:12:62:AA:29:95;
channel 12;
comment "Nokia OBEX PC Suite Services";
}
rfcomm1 {
bind yes;
device 00:12:62:AA:29:95;
channel 10;
comment "OBEX file transfer";
}
rfcomm2 {
bind yes;
device 00:12:62:AA:29:95;
channel 9;
comment "OBEX file push";Quoted 8 lines
}
rfcomm3 {
bind yes;
device 00:12:62:AA:29:95;
channel 1;
comment "Dial-up Networking";
bind yes;
}Starting the bluez-utils services and then running rfcomm shows this:
Quoted 4 lines
rfcomm0: 00:12:62:AA:29:95 channel 12 clean
rfcomm1: 00:12:62:AA:29:95 channel 10 clean
rfcomm2: 00:12:62:AA:29:95 channel 9 clean
rfcomm3: 00:12:62:AA:29:95 channel 1 clean
I have a ppp connection which looks like:
Quoted 9 lines
/etc/ppp/peers/orange:
debug
nodetach
noauth
lcp-echo-failure 0
connect "/usr/sbin/chat-v -f/etc/chatscripts/orange" debug/dev/rfcomm3115200
defaultroute
Quoted 8 lines
usepeerdns
noipdefault
local
crtscts
novj
nobsdcomp
nopcomp
noaccomp
The corresponding chatscript looks like this:
Quoted 13 lines
TIMEOUT 20
ECHO ON ABORT '\nBUSY\r' ABORT '\nERROR\r' ABORT '\nNO ANSWER\r' ABORT '\nNO CARRIER\r' ABORT '\nNO DIALTONE\r' ABORT '\nRINGING\r\n\r\nRINGING\r' '' \rAT TIMEOUT 12 OK ATE0 OK 'AT+cgdcont=1,"IP","orangeinternet"' OK ATD*99***1#
The problem is this:
When I start the connection, most of the time it gets through the chatscript and starts sending LCP negotiation. Then it stops receiving messages from the phone.
like this:
Quoted 20 lines
pon orange
AT
OK
ATE0
OKOK
Serial connection established.
using channel 11
Using interface ppp0
Connect: ppp0 <-->/dev/rfcomm3
sent [LCP ConfReq id=0x1 <asyncmap0x0> <magic0x204d2d31>] sent [LCP ConfReq id=0x1 <asyncmap0x0> <magic0x204d2d31>] sent [LCP ConfReq id=0x1 <asyncmap0x0> <magic0x204d2d31>] sent [LCP ConfReq id=0x1 <asyncmap0x0> <magic0x204d2d31>] sent [LCP ConfReq id=0x1 <asyncmap0x0> <magic0x204d2d31>] sent [LCP ConfReq id=0x1 <asyncmap0x0> <magic0x204d2d31>] sent [LCP ConfReq id=0x1 <asyncmap0x0> <magic0x204d2d31>] sent [LCP ConfReq id=0x1 <asyncmap0x0> <magic0x204d2d31>] sent [LCP ConfReq id=0x1 <asyncmap0x0> <magic0x204d2d31>]
Quoted 8 lines
sent [LCP ConfReq id=0x1 <asyncmap
0x0> <magic0x204d2d31>]
Terminating on signal 2 ### Pressed ctrl-C here
sent [LCP TermReq id=0x2 "User request"]
sent [LCP TermReq id=0x3 "User request"] Connection terminated.
Receive serial link is not 8-bit clean:
Problem: all had bit 7 set to 0
Modem hangup
The the corresponding rfcomm channel is closed:
runing rfcomm again shows:
Quoted 4 lines
rfcomm0: 00:12:62:AA:29:95 channel 12 clean
rfcomm1: 00:12:62:AA:29:95 channel 10 clean
rfcomm2: 00:12:62:AA:29:95 channel 9 clean
rfcomm3: 00:12:62:AA:29:95 channel 1 closed
It will never connect again to this channel unless I restart the rfcomm process and/or remove the rfcomm module and start again.
However the OBEX services continue working seamlessly, so I think that the pairing must be OK.
Can anyone suggest anything to try?
I see from the news on bluez.org that the latest kernel: patch 2.6.12-mh2 includes improvements for rfcomm, DCD detection and remote port negotiation. Should this patch be applied to a pristine 2.6.12 kernel source (before the 2.6.12.3 update patch) or is this already included in the kernel.org source?
Many thanks in advance.
Ben Tullis
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users