Linux on the Sharp Mobilion PRO PV5000A?
Hi All,
I've recently acquired a new toy, a Sharp PDA. From what I've read on the NetBSD/hpcmips website, and other places, it's based around a Toshiba TX3922 129MHz CPU and has 32MB RAM.
I've done some research, and it looks like this machine may, be a cousin of the Philips Velo. I'm yet to pull mine apart (which I'll have to do at some point, to fix a dickey power socket), so I can't be sure what hardware mine has.
Anyway, what I was going to ask, is has anyone tried Linux or NetBSD on this system? If someone's already started work on porting, then I'd like to assist where I can, no point in two of us duplicating efforts :-).
I've put some stuff up on the wiki[1], about what I know on the device.
I'll possibly look into getting some sort of WinCE/MIPS dev environment
set up, so that I can compile apps to explore the hardware on the device, but I'd be interested to hear if anyone has attempted a port to such a device.
Regards,
Signature · 9 lines
____ _ Stuart Longland (a.k.a Redhatter) / _ \ ___ ___ __| |__ __ __ Gentoo Linux/MIPS Cobalt and Docs - (_) \ / \ ; \(__ __)/ \ / \ Developer \ // O _| / /\ \ | | | /\ | /\ | / / \ /__| / \ \ | | | \/ | \/ | (___/ \____/|_; |_| \_/ \__/ \__/ http://dev.gentoo.org/~redhatter Footnotes: 1. http://www.linux-mips.org/wiki/Sharp_Mobilion_Pro_PV5000A
Hi,
Quoted 5 lines · On Sat, 06 Aug 2005 23:07:27 +1000 Stuart Longland <[email protected]> wrote:
Hi All,
I've recently acquired a new toy, a Sharp PDA. From what I've read on the NetBSD/hpcmips website, and other places, it's based around a Toshiba TX3922 129MHz CPU and has 32MB RAM.
This is old information about TX3922.
http://www.sikigami.com/~fuku/linux-telios/index-en.html
I don't know that Telios and PV5000A are the same.
Quoted 9 lines
I've done some research, and it looks like this machine may, be a cousin of the Philips Velo. I'm yet to pull mine apart (which I'll have to do at some point, to fix a dickey power socket), so I can't be sure what hardware mine has.
Anyway, what I was going to ask, is has anyone tried Linux or NetBSD on this system? If someone's already started work on porting, then I'd like to assist where I can, no point in two of us duplicating efforts :-).
Quoted 6 lines
I've put some stuff up on the wiki[1], about what I know on the device.
I'll possibly look into getting some sort of WinCE/MIPS dev environment
set up, so that I can compile apps to explore the hardware on the device, but I'd be interested to hear if anyone has attempted a port to such a device.
Yoichi
Quoted 5 lines · Yoichi Yuasa
This is old information about TX3922.
http://www.sikigami.com/~fuku/linux-telios/index-en.html
I don't know that Telios and PV5000A are the same.
I'm fairly sure they aren't. If I remember correctly, the companion chip PLUM2 was only used in the Telios.
Signature · 2 lines
Martin Michlmayr http://www.cyrius.com/
Quoted 11 lines · Martin Michlmayr
Quoted 5 lines · Yoichi Yuasa
This is old information about TX3922.
http://www.sikigami.com/~fuku/linux-telios/index-en.html
I don't know that Telios and PV5000A are the same.
I'm fairly sure they aren't. If I remember correctly, the companion chip PLUM2 was only used in the Telios.
Well... I actually pulled mine apart tonight.
http://www.linux-mips.org/wiki/Sharp_Mobilion_Pro_PV5000A#A_look_inside
My primary objective was to fix a wobbly power socket... but I also took the time to take snaps of the board & its chips. In putting the unit back together again though, it seems I now have some spare screws... oddly enough, WinCE seems to boot & run ever so slightly faster.
You could say I've made it more efficient by removing parts -- but I don't think screws count :-)
I'll have to google some of the ICs... I actually thought this would be using the Philips Poseidon SoC, but no, there's not a single chip with "Philips" written on it anywhere. It's mostly Toshiba circuitry -- one will be responsible for I/O, I know that much. :-)
Signature · 6 lines
____ _ Stuart Longland (a.k.a Redhatter) / _ \ ___ ___ __| |__ __ __ Gentoo Linux/MIPS Cobalt and Docs - (_) \ / \ ; \(__ __)/ \ / \ Developer \ // O _| / /\ \ | | | /\ | /\ | / / \ /__| / \ \ | | | \/ | \/ | (___/ \____/|_; |_| \_/ \__/ \__/ http://dev.gentoo.org/~redhatter