Skip to contentSkip to conversation

NCQ support NVidia NForce4 (CK804) SATAII

DISCUSSION Michael Thonke 2 participants 4 messages Aug 10, 2005

lore
Share & tools
lore
#0 lore raw

Hello Jeff,

I would like to ask what the plans/timeplan to implement NCQ support for NVidia NForce4(CK804) SATAII based chipsets? Fact is that is it possible to use NCQ with NForce4 SATAII on Windows system, I wonder why it isn't support by libata? Is there something in your git-tree? Or what are the reasons/problems behind that libata is missing NCQ support for (CK804) SATAII?

Greets and
Best regards

Signature · 3 lines
Michael Thonke
IT-Systemintegrator /
System- and Softwareanalyist
#1 lore raw
Quoted 3 lines · Michael Thonke

Hello Jeff,

I would like to ask what the plans/timeplan to implement NCQ support for NVidia NForce4(CK804) SATAII based chipsets? Fact is that is it possible to use NCQ with NForce4 SATAII on Windows system, I wonder why it isn't support by libata? Is there something in your git-tree? Or what are the reasons/problems behind that libata is missing NCQ support for (CK804) SATAII?

Ask NVIDIA. They are the only company that gives me -zero- information on their SATA controllers.

As such, there are -zero- plans for NCQ on NVIDIA controllers at this time.

Jeff

#2 lore raw
Quoted 8 lines · Jeff Garzik
Quoted 3 lines · Michael Thonke

Hello Jeff,

I would like to ask what the plans/timeplan to implement NCQ support for NVidia NForce4(CK804) SATAII based chipsets? Fact is that is it possible to use NCQ with NForce4 SATAII on Windows system, I wonder why it isn't support by libata? Is there something in your git-tree? Or what are the reasons/problems behind that libata is missing NCQ support for (CK804) SATAII?

Ask NVIDIA. They are the only company that gives me -zero- information on their SATA controllers.

I thought of that.. *sigh*

Quoted 2 lines

As such, there are -zero- plans for NCQ on NVIDIA controllers at this time.

Could it be possible to make reverse engeneering? I think they should work as the SATA-IO SATAII specification says.

Jeff, I will also contact NVidia to ask for specification or information about it.

Quoted 6 lines

Jeff

/Michael

Signature · 3 lines
Michael Thonke
IT-Systemintegrator /
System- and Softwareanalyist
#3 lore raw
In reply to Jeff Garzik
Quoted 2 lines · Jeff Garzik

Ask NVIDIA. They are the only company that gives me -zero- information on their SATA controllers.

Hello again,

Jeff, did you found any informations about NForce4 SATA Controller? I found a Product Brief/Specification and a Blockdiagramm.

Also found out that the CK804 supports TCQ/NCQ

-> snip

nForce4 Ultra and nForce4 SLi can support tagged command queuing and native command queuing when used with SATA hard disks that support these features

-->

Quoted 7 lines

As such, there are -zero- plans for NCQ on NVIDIA controllers at this time.

Jeff

If NVidia followed the SATA-IO spec than should be possible to make them work with NCQ, or do I think wrong of that? Or isn't it possible?

/Michael

Signature · 3 lines
Michael Thonke
IT-Systemintegrator /
System- and Softwareanalyist