Skip to contentSkip to conversation

libata PATA todo list

DISCUSSION Jeff Garzik 2 participants 2 messages Aug 11, 2005 – Aug 15, 2005 libata

lore
Share & tools
lore
#0 lore raw

Since there's been some recent interest in the subject, I thought I would post the PATA todo list for libata. Some of these items are from my memory, and some are from a list Alan was kind enough to create. The items verbatim from Alan are prefixed "Alan: ".

1) Locked device/host speed

To support devices such as those in the ide/pci/generic.c list, we need to ensure that libata -never- attempts to change the device speed (ata_dev_set_xfermode should be avoided).

2) Simplex DMA

PCI IDE specification has a 'simplex' DMA bit, which should be tested. Simplex means that only one command can be outstanding, for BOTH port0 and port1, at any given time.

Possibly some hosts also need Simplex DMA, but may not assert the standard PCI IDE Simplex DMA capability bit. I don't know.

3) Speed change on error

Downshift device to a slower UDMA speed, and eventually from DMA->PIO, as errors persist. There is no 'specified way' to do this, this is purely hueristic.

4) Alan: Command filter

Alan -- explanation?

I know one line item here, at least: Promise controllers snoop SET FEATURES - XFER MODE command. We must stop command processing on ALL ports when this command is issued, to avoid corruption.

5) Alan: MWDMA broken still? is piix doc correct?

6) Alan: some PATA LBA48 devices cannot do > 256 sectors.

7) Alan: Some ALi requires LBA48 be done via PIO. LBA28 DMA is OK.

8) ATAPI device CDB interrupt

Some older ATAPI devices require the OS driver to wait for an interrupt, after CDB is written, before command processing proceeds.

9) ATAPI devices may delay setting DRQ=1 for up to 3ms.

Make sure we honor the delay noted in IDENTIFY PACKET DEVICE word 0.

10) ATAPI DMA alignment (discussed elsewhere)

Needed even for PATA, AFAICT.

#1 lore raw
Quoted 9 lines · Jeff Garzik

Since there's been some recent interest in the subject, I thought I would post the PATA todo list for libata. Some of these items are from my memory, and some are from a list Alan was kind enough to create. The items verbatim from Alan are prefixed "Alan: ".

2) Simplex DMA

PCI IDE specification has a 'simplex' DMA bit, which should be tested. Simplex means that only one command can be outstanding, for BOTH port0 and port1, at any given time.

Possibly some hosts also need Simplex DMA, but may not assert the standard PCI IDE Simplex DMA capability bit. I don't know.

I remember using devices which require this. Not recently.

Quoted 5 lines

4) Alan: Command filter

Alan -- explanation?

I know one line item here, at least: Promise controllers snoop SET FEATURES - XFER MODE command. We must stop command processing on ALL ports when this command is issued, to avoid corruption.

The last time I tried, cdrecord was allowed to burn the first session of a multi-session CD as a user (with correct device permissions) but not to read the multisession info (current ISO size) to burn another session. I haven't tried it in the last few months, I changed my script to do something else. However, it really should work.

I will test this if you like, but I'm on 7x24 coverage this week and 7x24 vacation after that, so not soon.

Quoted 3 lines

10) ATAPI DMA alignment (discussed elsewhere)

Needed even for PATA, AFAICT.

Thanks for keeping the list!

Signature · 3 lines
   -bill davidsen ([email protected])
"The secret to procrastination is to put things off until the
 last possible moment - but no longer"  -me