Skip to contentSkip to conversation

Disagreement about versions following CVS update

DISCUSSION Philip Prindeville 4 participants 25 messages Aug 19, 2005 – Aug 22, 2005

lore
Share & tools
lore
#0 lore raw

I did a CVS update yesterday, and a rebuild and tried to reinstall, and I'm seeing:

WARNING: Error inserting snd_seq_device (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/seq/snd-seq-device.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_rawmidi (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-rawmidi.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_mpu401_uart (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_pcm (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error running install command for snd_pcm
WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_via82xx (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/pci/snd-via82xx.ko): Unknown symbol in module, or unknown parameter (see dmesg)

Stupid question: did a version number get changed somewhere? And if so, what's the fix? I did a:

% make -C alsa-driver clean

and a rebuild, but I'm still seeing these. What did I miss?

-Philip

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#1 lore raw
Quoted 6 lines · Philip Prindeville

Stupid question: did a version number get changed somewhere? And if so, what's the fix? I did a:

% make -C alsa-driver clean

and a rebuild, but I'm still seeing these. What did I miss?

Your kernel sources probably do not match the running kernel.

Lee

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#2 lore raw
Quoted 8 lines · Lee Revell
Quoted 5 lines · Philip Prindeville

Stupid question: did a version number get changed somewhere? And if so, what's the fix? I did a:

% make -C alsa-driver clean

Quoted 10 lines
Quoted 3 lines

and a rebuild, but I'm still seeing these. What did I miss?

Your kernel sources probably do not match the running kernel.

Lee

No, that's not the issue:

[root@media alsa]# make
...
checking for kernel version... 2.6.12-1.1372_FC3
...
checking for directory to store kernel modules... /lib/modules/2.6.12-1.1372_FC3/kernel/sound
...
make -C /lib/modules/2.6.12-1.1372_FC3/source SUBDIRS=/root/Downloads/alsa/alsa-driver O=/lib/modules/2.6.12-1.1372_FC3/build modules
...
install: cannot create regular file `/sbin/init.d/alsasound': No such file or directory
...

ALSA modules were successfully compiled.

...
/sbin/depmod -a -F /lib/modules/2.6.12-1.1372_FC3/source/System.map 2.6.12-1.1372_FC3
...
[root@media alsa]# uname -a
Linux media 2.6.12-1.1372_FC3 #1 Fri Jul 15 00:55:23 EDT 2005 x86_64 x86_64 x86_64 GNU/Linux [root@media alsa]#

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#3 lore raw
Quoted 1 line · Philip Prindeville

No, that's not the issue:

No idea then. Try blowing away your tree and getting a fresh checkout?

Lee

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#4 lore raw
Quoted 12 lines · Lee Revell
Quoted 3 lines · Philip Prindeville

No, that's not the issue:

No idea then. Try blowing away your tree and getting a fresh checkout?

Lee

No joy. Changes nothing.

-Philip

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#5 lore raw
Quoted 9 lines · Philip Prindeville
Quoted 7 lines · Lee Revell
Quoted 3 lines · Philip Prindeville

No, that's not the issue:

Quoted 8 lines
Quoted 5 lines

No idea then. Try blowing away your tree and getting a fresh checkout?

Lee

No joy. Changes nothing.

Did you update alsa-kernel as well as alsa-driver?

Lee

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#6 lore raw
Quoted 24 lines · Lee Revell
Quoted 21 lines · Philip Prindeville
Quoted 17 lines · Lee Revell
Quoted 5 lines · Philip Prindeville

No, that's not the issue:

No idea then. Try blowing away your tree and getting a fresh checkout?

Lee

Quoted 10 lines
Quoted 3 lines

No joy. Changes nothing.

Did you update alsa-kernel as well as alsa-driver?

Lee

Yep.

-Philip

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#7 lore raw
Quoted 2 lines · Philip Prindeville

Yep.

What does dmesg say?

Lee

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#8 lore raw
Quoted 14 lines · Lee Revell
Quoted 4 lines · Philip Prindeville

Yep.

What does dmesg say?

Lee

It says:

snd_seq_device: disagrees about version of symbol snd_info_register
snd_seq_device: Unknown symbol snd_info_register
snd_seq_device: disagrees about version of symbol snd_info_create_module_entry
snd_seq_device: Unknown symbol snd_info_create_module_entry
snd_seq_device: disagrees about version of symbol snd_info_free_entry
snd_seq_device: Unknown symbol snd_info_free_entry
snd_seq_device: disagrees about version of symbol snd_seq_root
snd_seq_device: Unknown symbol snd_seq_root
snd_seq_device: disagrees about version of symbol snd_device_new
snd_seq_device: Unknown symbol snd_device_new
snd_seq_device: disagrees about version of symbol snd_info_unregister
snd_seq_device: Unknown symbol snd_info_unregister
snd_rawmidi: disagrees about version of symbol snd_info_register
snd_rawmidi: Unknown symbol snd_info_register
snd_rawmidi: disagrees about version of symbol snd_ctl_unregister_ioctl_compat
snd_rawmidi: Unknown symbol snd_ctl_unregister_ioctl_compat
snd_rawmidi: Unknown symbol snd_seq_device_new
snd_rawmidi: disagrees about version of symbol snd_info_free_entry
snd_rawmidi: Unknown symbol snd_info_free_entry
snd_rawmidi: Unknown symbol snd_unregister_oss_device
snd_rawmidi: Unknown symbol snd_register_oss_device
snd_rawmidi: disagrees about version of symbol snd_ctl_register_ioctl
snd_rawmidi: Unknown symbol snd_ctl_register_ioctl
snd_rawmidi: disagrees about version of symbol snd_card_file_add
snd_rawmidi: Unknown symbol snd_card_file_add
snd_rawmidi: Unknown symbol snd_oss_info_register
snd_rawmidi: disagrees about version of symbol snd_unregister_device
snd_rawmidi: Unknown symbol snd_unregister_device
snd_rawmidi: disagrees about version of symbol snd_device_new
snd_rawmidi: Unknown symbol snd_device_new
snd_rawmidi: disagrees about version of symbol snd_ctl_unregister_ioctl
snd_rawmidi: Unknown symbol snd_ctl_unregister_ioctl
snd_rawmidi: disagrees about version of symbol snd_ctl_register_ioctl_compat
snd_rawmidi: Unknown symbol snd_ctl_register_ioctl_compat
snd_rawmidi: disagrees about version of symbol snd_info_create_card_entry
snd_rawmidi: Unknown symbol snd_info_create_card_entry
snd_rawmidi: disagrees about version of symbol snd_device_free
snd_rawmidi: Unknown symbol snd_device_free
snd_rawmidi: disagrees about version of symbol snd_card_file_remove
snd_rawmidi: Unknown symbol snd_card_file_remove
snd_rawmidi: disagrees about version of symbol snd_info_unregister
snd_rawmidi: Unknown symbol snd_info_unregister
snd_rawmidi: disagrees about version of symbol snd_device_register
snd_rawmidi: Unknown symbol snd_device_register
snd_rawmidi: disagrees about version of symbol snd_register_device
snd_rawmidi: Unknown symbol snd_register_device
snd_mpu401_uart: Unknown symbol snd_rawmidi_receive
snd_mpu401_uart: Unknown symbol snd_rawmidi_transmit_ack
snd_mpu401_uart: Unknown symbol snd_rawmidi_transmit_peek
snd_mpu401_uart: Unknown symbol snd_rawmidi_new
snd_mpu401_uart: Unknown symbol snd_rawmidi_set_ops
snd_mpu401_uart: disagrees about version of symbol snd_device_free
snd_mpu401_uart: Unknown symbol snd_device_free
snd_timer: disagrees about version of symbol snd_info_register
snd_timer: Unknown symbol snd_info_register
snd_timer: disagrees about version of symbol snd_info_create_module_entry
snd_timer: Unknown symbol snd_info_create_module_entry
snd_timer: disagrees about version of symbol snd_info_free_entry
snd_timer: Unknown symbol snd_info_free_entry
snd_timer: Unknown symbol snd_oss_info_register
snd_timer: disagrees about version of symbol snd_unregister_device
snd_timer: Unknown symbol snd_unregister_device
snd_timer: disagrees about version of symbol snd_device_new
snd_timer: Unknown symbol snd_device_new
snd_timer: disagrees about version of symbol snd_info_unregister
snd_timer: Unknown symbol snd_info_unregister
snd_timer: disagrees about version of symbol snd_register_device
snd_timer: Unknown symbol snd_register_device
snd_timer: disagrees about version of symbol snd_info_register
snd_timer: Unknown symbol snd_info_register
snd_timer: disagrees about version of symbol snd_info_create_module_entry
snd_timer: Unknown symbol snd_info_create_module_entry
snd_timer: disagrees about version of symbol snd_info_free_entry
snd_timer: Unknown symbol snd_info_free_entry
snd_timer: Unknown symbol snd_oss_info_register
snd_timer: disagrees about version of symbol snd_unregister_device
snd_timer: Unknown symbol snd_unregister_device
snd_timer: disagrees about version of symbol snd_device_new
snd_timer: Unknown symbol snd_device_new
snd_timer: disagrees about version of symbol snd_info_unregister
snd_timer: Unknown symbol snd_info_unregister
snd_timer: disagrees about version of symbol snd_register_device
snd_timer: Unknown symbol snd_register_device
snd_pcm: disagrees about version of symbol snd_info_register
snd_pcm: Unknown symbol snd_info_register
snd_pcm: disagrees about version of symbol snd_info_create_module_entry
snd_pcm: Unknown symbol snd_info_create_module_entry
snd_pcm: disagrees about version of symbol snd_ctl_unregister_ioctl_compat
snd_pcm: Unknown symbol snd_ctl_unregister_ioctl_compat
snd_pcm: Unknown symbol snd_timer_notify
snd_pcm: Unknown symbol snd_timer_interrupt
snd_pcm: disagrees about version of symbol snd_info_free_entry
snd_pcm: Unknown symbol snd_info_free_entry
snd_pcm: disagrees about version of symbol snd_ctl_register_ioctl
snd_pcm: Unknown symbol snd_ctl_register_ioctl
snd_pcm: disagrees about version of symbol snd_card_file_add
snd_pcm: Unknown symbol snd_card_file_add
snd_pcm: disagrees about version of symbol snd_unregister_device
snd_pcm: Unknown symbol snd_unregister_device
snd_pcm: Unknown symbol snd_timer_new
snd_pcm: disagrees about version of symbol snd_device_new
snd_pcm: Unknown symbol snd_device_new
snd_pcm: disagrees about version of symbol snd_ctl_unregister_ioctl
snd_pcm: Unknown symbol snd_ctl_unregister_ioctl
snd_pcm: disagrees about version of symbol snd_ctl_register_ioctl_compat
snd_pcm: Unknown symbol snd_ctl_register_ioctl_compat
snd_pcm: disagrees about version of symbol snd_info_create_card_entry
snd_pcm: Unknown symbol snd_info_create_card_entry
snd_pcm: disagrees about version of symbol snd_power_wait
snd_pcm: Unknown symbol snd_power_wait
snd_pcm: disagrees about version of symbol snd_device_free
snd_pcm: Unknown symbol snd_device_free
snd_pcm: disagrees about version of symbol snd_card_file_remove
snd_pcm: Unknown symbol snd_card_file_remove
snd_pcm: disagrees about version of symbol snd_info_unregister
snd_pcm: Unknown symbol snd_info_unregister
snd_pcm: disagrees about version of symbol snd_device_register
snd_pcm: Unknown symbol snd_device_register
snd_pcm: disagrees about version of symbol snd_register_device
snd_pcm: Unknown symbol snd_register_device
snd_ac97_codec: disagrees about version of symbol snd_info_register
snd_ac97_codec: Unknown symbol snd_info_register
snd_ac97_codec: disagrees about version of symbol snd_ctl_add
snd_ac97_codec: Unknown symbol snd_ctl_add
snd_ac97_codec: disagrees about version of symbol snd_info_free_entry
snd_ac97_codec: Unknown symbol snd_info_free_entry
snd_ac97_codec: Unknown symbol snd_interval_refine
snd_ac97_codec: disagrees about version of symbol snd_ctl_find_id
snd_ac97_codec: Unknown symbol snd_ctl_find_id
snd_ac97_codec: disagrees about version of symbol snd_ctl_new1
snd_ac97_codec: Unknown symbol snd_ctl_new1
snd_ac97_codec: disagrees about version of symbol snd_ctl_remove_id
snd_ac97_codec: Unknown symbol snd_ctl_remove_id
snd_ac97_codec: disagrees about version of symbol snd_component_add
snd_ac97_codec: Unknown symbol snd_component_add
snd_ac97_codec: Unknown symbol snd_pcm_hw_rule_add
snd_ac97_codec: disagrees about version of symbol snd_device_new
snd_ac97_codec: Unknown symbol snd_device_new
snd_ac97_codec: disagrees about version of symbol snd_info_create_card_entry
snd_ac97_codec: Unknown symbol snd_info_create_card_entry
snd_ac97_codec: disagrees about version of symbol snd_info_unregister
snd_ac97_codec: Unknown symbol snd_info_unregister
snd_via82xx: disagrees about version of symbol snd_ctl_add
snd_via82xx: Unknown symbol snd_ctl_add
snd_via82xx: Unknown symbol snd_ac97_resume
snd_via82xx: Unknown symbol snd_pcm_new
snd_via82xx: Unknown symbol snd_pcm_limit_hw_rates
snd_via82xx: disagrees about version of symbol snd_card_register
snd_via82xx: Unknown symbol snd_card_register
snd_via82xx: disagrees about version of symbol snd_card_free
snd_via82xx: Unknown symbol snd_card_free
snd_via82xx: Unknown symbol snd_pcm_lib_preallocate_pages_for_all
snd_via82xx: disagrees about version of symbol snd_card_proc_new
snd_via82xx: Unknown symbol snd_card_proc_new
snd_via82xx: Unknown symbol snd_ac97_set_rate
snd_via82xx: Unknown symbol snd_pcm_format_physical_width
snd_via82xx: Unknown symbol snd_ac97_update_bits
snd_via82xx: Unknown symbol snd_ac97_mixer
snd_via82xx: Unknown symbol snd_ac97_bus
snd_via82xx: disagrees about version of symbol snd_ctl_find_id
snd_via82xx: Unknown symbol snd_ctl_find_id
snd_via82xx: disagrees about version of symbol snd_ctl_new1
snd_via82xx: Unknown symbol snd_ctl_new1
snd_via82xx: disagrees about version of symbol snd_card_new
snd_via82xx: Unknown symbol snd_card_new
snd_via82xx: Unknown symbol snd_ac97_suspend
snd_via82xx: Unknown symbol snd_pcm_lib_malloc_pages
snd_via82xx: Unknown symbol snd_pcm_lib_ioctl
snd_via82xx: Unknown symbol snd_pcm_lib_free_pages
snd_via82xx: Unknown symbol snd_pcm_set_ops
snd_via82xx: disagrees about version of symbol snd_card_set_pm_callback
snd_via82xx: Unknown symbol snd_card_set_pm_callback
snd_via82xx: Unknown symbol snd_pcm_hw_constraint_list
snd_via82xx: disagrees about version of symbol snd_device_new
snd_via82xx: Unknown symbol snd_device_new
snd_via82xx: Unknown symbol snd_pcm_sgbuf_ops_page
snd_via82xx: Unknown symbol snd_mpu401_uart_interrupt
snd_via82xx: Unknown symbol snd_ac97_get_short_name
snd_via82xx: Unknown symbol snd_pcm_suspend_all
snd_via82xx: Unknown symbol snd_pcm_hw_constraint_integer
snd_via82xx: Unknown symbol snd_mpu401_uart_new
snd_via82xx: Unknown symbol snd_pcm_period_elapsed
snd_via82xx: Unknown symbol snd_ac97_tune_hardware

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#9 lore raw
Quoted 4 lines · Philip Prindeville

nd_seq_device: disagrees about version of symbol snd_info_register
snd_seq_device: Unknown symbol snd_info_register
snd_seq_device: disagrees about version of symbol snd_info_create_module_entry

Did you make sure to remove the previous modules with rmmod before modprobe'ing the new ones?

Lee

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#10 lore raw
Quoted 9 lines · Lee Revell
Quoted 5 lines · Philip Prindeville

nd_seq_device: disagrees about version of symbol snd_info_register
snd_seq_device: Unknown symbol snd_info_register
snd_seq_device: disagrees about version of symbol snd_info_create_module_entry

Quoted 7 lines

Did you make sure to remove the previous modules with rmmod before modprobe'ing the new ones?

Lee

Yessir.

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#11 lore raw
Quoted 15 lines · Philip Prindeville
Quoted 13 lines · Lee Revell
Quoted 6 lines · Philip Prindeville

nd_seq_device: disagrees about version of symbol snd_info_register
snd_seq_device: Unknown symbol snd_info_register
snd_seq_device: disagrees about version of symbol snd_info_create_module_entry

Did you make sure to remove the previous modules with rmmod before modprobe'ing the new ones?

Quoted 8 lines
Quoted 4 lines

Lee

Yessir.

Then I'm completely out of ideas. This is either a bug in the Fedora kernel, or a bug in ALSA.

Lee

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#12 lore raw
Quoted 34 lines · Lee Revell
Quoted 19 lines · Philip Prindeville
Quoted 15 lines · Lee Revell
Quoted 7 lines · Philip Prindeville

nd_seq_device: disagrees about version of symbol snd_info_register
snd_seq_device: Unknown symbol snd_info_register
snd_seq_device: disagrees about version of symbol snd_info_create_module_entry

Did you make sure to remove the previous modules with rmmod before modprobe'ing the new ones?

Quoted 11 lines
Quoted 6 lines

Lee

Yessir.

Quoted 7 lines

Then I'm completely out of ideas. This is either a bug in the Fedora kernel, or a bug in ALSA.

Lee

Yup. I even pulled a fresh tree, too.

Say, there's another issue that I'm struggling with... I'm trying to get the makefiles to be a little more Fedora-friendly...

As they are, things like libdir and datadir aren't set correctly by default...

Not sure why the top-level Makefile has:

HOST = "$(ARCH)-suse-linux-gnu"

either...

Shouldn't that be passed in or discovered dynamically?

-Philip

-Philip

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#16 lore raw
In reply to Philip Prindeville
Quoted 13 lines · Philip Prindeville

I did a CVS update yesterday, and a rebuild and tried to reinstall, and I'm seeing:

WARNING: Error inserting snd_seq_device (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/seq/snd-seq-device.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_rawmidi (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-rawmidi.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_mpu401_uart (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_pcm (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error running install command for snd_pcm
WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_via82xx (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/pci/snd-via82xx.ko): Unknown symbol in module, or unknown parameter (see dmesg)

Quoted 8 lines

Stupid question: did a version number get changed somewhere? And if so, what's the fix? I did a:

% make -C alsa-driver clean

and a rebuild, but I'm still seeing these. What did I miss?

-Philip

It seem that ALSA version has been changed from 1.0.9b to 1.10.0-rc1 on CVS.

alsa-driver and alsa-lib can be rebuilded except alsa-utils. I follow the instruction but cannot compile alsa-utils (CVS) on FC1.

cvs/alsa-utils]# ./cvscompile
Copying file ABOUT-NLS
Copying file config.rpath
Copying file mkinstalldirs
Not copying intl/ directory.
Copying file po/Makefile.in.in
Copying file po/boldquot.sed
Copying file po/[email protected]
Copying file po/[email protected]
Copying file po/insert-header.sin
Copying file po/Makevars.template
Copying file po/quot.sed
Copying file po/remove-potcdate.sin Copying file po/Rules-quot
Copying file m4/codeset.m4
Copying file m4/gettext.m4
Copying file m4/glibc21.m4
Copying file m4/iconv.m4
Copying file m4/intdiv0.m4
Copying file m4/inttypes.m4
Copying file m4/inttypes_h.m4
Copying file m4/inttypes-pri.m4
Copying file m4/isc-posix.m4
Copying file m4/lcmessage.m4
Copying file m4/lib-ld.m4
Copying file m4/lib-link.m4
Copying file m4/lib-prefix.m4
Copying file m4/nls.m4
Copying file m4/po.m4
Copying file m4/progtest.m4
Copying file m4/stdint_h.m4
Copying file m4/uintmax_t.m4
Copying file m4/ulonglong.m4
Updating configure.in (backup is in configure.in~)

Please use AM_GNU_GETTEXT([external]) in order to cause autoconfiguration to look for an external libintl.

Please run 'aclocal -I m4' to regenerate the aclocal.m4 file. You need aclocal from GNU automake 1.5 (or newer) to do this. Then run 'autoconf' to regenerate the configure file.

You might also want to copy the convenience header file gettext.h from the /usr/share/gettext directory into your package.
It is a wrapper around <libintl.h> that implements the configure --disable-nls option.

Press Return to acknowledge the previous three paragraphs.

CFLAGS=-O2 -Wall -pipe -g
./configure
checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for style of include used by make... GNU checking for gcc... gcc32
checking for C compiler default output... a.out checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes checking whether gcc32 accepts -g... yes
checking for gcc32 option to accept ANSI C... none needed checking dependency style of gcc32... gcc3
checking build system type... i686-redhat-linux-gnu checking host system type... i686-redhat-linux-gnu checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking whether NLS is requested... yes
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc ./configure: line 4415: syntax error near unexpected token <<<' ./configure: line 4415: <<<<<<< configure.in'

cvs/alsa-utils]# aclocal --version
aclocal (GNU automake) 1.7.8

cvs/alsa-utils]# aclocal -I m4

cvs/alsa-utils]# autoconf --version
autoconf (GNU Autoconf) 2.57

cvs/alsa-utils]# autoconf

cvs/alsa-utils]# ./configure
checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for style of include used by make... GNU checking for gcc... gcc32
checking for C compiler default output... a.out checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes checking whether gcc32 accepts -g... yes
checking for gcc32 option to accept ANSI C... none needed checking dependency style of gcc32... gcc3
checking build system type... i686-redhat-linux-gnu checking host system type... i686-redhat-linux-gnu checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking whether NLS is requested... yes
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc ./configure: line 4415: syntax error near unexpected token <<<' ./configure: line 4415: <<<<<<< configure.in'

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#17 lore raw
Quoted 2 lines · Raymond

./configure: line 4415: syntax error near unexpected token <<<' ./configure: line 4415: <<<<<<< configure.in'

This indicates a CVS merge conflict. Try a fresh checkout.

Lee

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#18 lore raw
Quoted 10 lines · Lee Revell
Quoted 2 lines · Raymond

./configure: line 4415: syntax error near unexpected token <<<' ./configure: line 4415: <<<<<<< configure.in'

This indicates a CVS merge conflict. Try a fresh checkout.

Lee

It's strange to find the following mixer controls in CAPTURE VIEW of alsamixer v1.0.10rc1 :-

# amixer -version
amixer version 1.0.10rc1

Simple mixer control '3D Control Sigmatel - Depth',0
Capabilities: volume volume-joined
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 3
Mono: 0 [0%]
Simple mixer control '3D Control Sigmatel - Rear Depth',0
Capabilities: volume volume-joined
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 3
Mono: 0 [0%]

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#19 lore raw

At Sun, 21 Aug 2005 08:55:37 +0800,

Quoted 20 lines · Raymond
Quoted 10 lines · Lee Revell
Quoted 2 lines · Raymond

./configure: line 4415: syntax error near unexpected token <<<' ./configure: line 4415: <<<<<<< configure.in'

This indicates a CVS merge conflict. Try a fresh checkout.

Lee

It's strange to find the following mixer controls in CAPTURE VIEW of alsamixer v1.0.10rc1 :-

# amixer -version
amixer version 1.0.10rc1
Quoted 12 lines

Simple mixer control '3D Control Sigmatel - Depth',0
Capabilities: volume volume-joined
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 3
Mono: 0 [0%]
Simple mixer control '3D Control Sigmatel - Rear Depth',0
Capabilities: volume volume-joined
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 3
Mono: 0 [0%]

This must be a bug of new simple abstraction code.

Takashi

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#13 lore raw
In reply to Philip Prindeville

At Fri, 19 Aug 2005 18:06:41 -0600,

Quoted 54 lines · Philip Prindeville
Quoted 35 lines · Lee Revell
Quoted 20 lines · Philip Prindeville
Quoted 16 lines · Lee Revell
Quoted 8 lines · Philip Prindeville

nd_seq_device: disagrees about version of symbol snd_info_register
snd_seq_device: Unknown symbol snd_info_register
snd_seq_device: disagrees about version of symbol snd_info_create_module_entry

Did you make sure to remove the previous modules with rmmod before modprobe'ing the new ones?

Quoted 11 lines
Quoted 6 lines

Lee

Yessir.

Quoted 7 lines

Then I'm completely out of ideas. This is either a bug in the Fedora kernel, or a bug in ALSA.

Lee

Yup. I even pulled a fresh tree, too.

Say, there's another issue that I'm struggling with... I'm trying to get the makefiles to be a little more Fedora-friendly...

As they are, things like libdir and datadir aren't set correctly by default...

Quoted 7 lines

Not sure why the top-level Makefile has:

HOST = "$(ARCH)-suse-linux-gnu"

either...

Shouldn't that be passed in or discovered dynamically?

I can't find any HOST in Makefile...

Takashi

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#22 lore raw
In reply to Philip Prindeville

At Fri, 19 Aug 2005 13:33:28 -0600,

Quoted 30 lines · Philip Prindeville

I did a CVS update yesterday, and a rebuild and tried to reinstall, and I'm seeing:

WARNING: Error inserting snd_seq_device (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/seq/snd-seq-device.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_rawmidi (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-rawmidi.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_mpu401_uart (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-timer.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-timer.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_pcm (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error running install command for snd_pcm
WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/pci/ac97/snd-ac97-codec.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_via82xx (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/pci/snd-via82xx.ko):
Unknown symbol in module, or unknown parameter (see dmesg)

Quoted 6 lines

Stupid question: did a version number get changed somewhere? And if so, what's the fix? I did a:

% make -C alsa-driver clean

and a rebuild, but I'm still seeing these. What did I miss?

After "alsasound stop", unload all remaining snd* modules including snd-page-alloc. "alsasound stop" keeps this module intentionally for the buffer management.

Then start alsasound again.

Takashi

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#20 lore raw
In reply to Takashi Iwai
Quoted 24 lines · Takashi Iwai

At Sun, 21 Aug 2005 08:55:37 +0800,

Quoted 7 lines · Raymond

It's strange to find the following mixer controls in CAPTURE VIEW of alsamixer v1.0.10rc1 :-

# amixer -version
amixer version 1.0.10rc1
Quoted 12 lines

Simple mixer control '3D Control Sigmatel - Depth',0
Capabilities: volume volume-joined
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 3
Mono: 0 [0%]
Simple mixer control '3D Control Sigmatel - Rear Depth',0
Capabilities: volume volume-joined
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 3
Mono: 0 [0%]

Quoted 6 lines

This must be a bug of new simple abstraction code.

Takashi

Not only AC97 3D control, also EQ Peaks and 10-bands stereo EQ controls

Simple mixer control 'EQ0 31Hz',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 32767
Front Left: 16022 [49%]
Front Right: 16022 [49%]
Simple mixer control 'EQ1 63Hz',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 32767
Front Left: 16022 [49%]
Front Right: 16022 [49%]

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#21 lore raw

At Mon, 22 Aug 2005 23:13:59 +0800,

Quoted 37 lines · Raymond
Quoted 25 lines · Takashi Iwai

At Sun, 21 Aug 2005 08:55:37 +0800,

Quoted 8 lines · Raymond

It's strange to find the following mixer controls in CAPTURE VIEW of alsamixer v1.0.10rc1 :-

# amixer -version
amixer version 1.0.10rc1
Quoted 12 lines

Simple mixer control '3D Control Sigmatel - Depth',0
Capabilities: volume volume-joined
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 3
Mono: 0 [0%]
Simple mixer control '3D Control Sigmatel - Rear Depth',0
Capabilities: volume volume-joined
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 3
Mono: 0 [0%]

Quoted 6 lines

This must be a bug of new simple abstraction code.

Takashi

Not only AC97 3D control, also EQ Peaks and 10-bands stereo EQ controls

Quoted 14 lines

Simple mixer control 'EQ0 31Hz',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 32767
Front Left: 16022 [49%]
Front Right: 16022 [49%]
Simple mixer control 'EQ1 63Hz',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 32767
Front Left: 16022 [49%]
Front Right: 16022 [49%]

Could you report this on ALSA BTS?

Thanks,

Takashi

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#23 lore raw
In reply to Takashi Iwai
Quoted 26 lines · Takashi Iwai

At Fri, 19 Aug 2005 13:33:28 -0600,

Quoted 13 lines · Philip Prindeville

I did a CVS update yesterday, and a rebuild and tried to reinstall, and I'm seeing:

WARNING: Error inserting snd_seq_device (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/seq/snd-seq-device.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_rawmidi (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-rawmidi.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_mpu401_uart (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_pcm (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error running install command for snd_pcm
WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_via82xx (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/pci/snd-via82xx.ko): Unknown symbol in module, or unknown parameter (see dmesg)

Quoted 8 lines

Stupid question: did a version number get changed somewhere? And if so, what's the fix? I did a:

% make -C alsa-driver clean

and a rebuild, but I'm still seeing these. What did I miss?

Quoted 10 lines

After "alsasound stop", unload all remaining snd* modules including snd-page-alloc. "alsasound stop" keeps this module intentionally for the buffer management.

Then start alsasound again.

Takashi

The issue seemed to be that you can only rmmod/insmod the driver a finite number of times, and then it will start reporting this error about being the wrong kernel version number.

Rebooting fixed the problem.

-Philip

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#24 lore raw

At Mon, 22 Aug 2005 10:27:13 -0600,

Quoted 52 lines · Philip Prindeville
Quoted 49 lines · Takashi Iwai

At Fri, 19 Aug 2005 13:33:28 -0600,

Quoted 29 lines · Philip Prindeville

I did a CVS update yesterday, and a rebuild and tried to reinstall, and I'm seeing:

WARNING: Error inserting snd_seq_device (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/seq/snd-seq-device.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_rawmidi (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-rawmidi.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_mpu401_uart (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-timer.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-timer.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_pcm (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/acore/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error running install command for snd_pcm
WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/pci/ac97/snd-ac97-codec.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_via82xx (/lib/modules/2.6.12-1.1372_FC3/kernel/sound/pci/snd-via82xx.ko):
Unknown symbol in module, or unknown parameter (see dmesg)

Quoted 8 lines

Stupid question: did a version number get changed somewhere? And if so, what's the fix? I did a:

% make -C alsa-driver clean

and a rebuild, but I'm still seeing these. What did I miss?

After "alsasound stop", unload all remaining snd* modules including snd-page-alloc. "alsasound stop" keeps this module intentionally for the buffer management.

Then start alsasound again.

Quoted 7 lines
Quoted 3 lines

Takashi

The issue seemed to be that you can only rmmod/insmod the driver a finite number of times, and then it will start reporting this error about being the wrong kernel version number.

No, the reason is that the old module remained because alsasound hadn't removed it. Since the other modules depend on the functions snd-page-alloc provides, they couldn't be loaded.

Quoted 1 line

Rebooting fixed the problem.

That's another way to fix the above, instead of rmmod :)

Takashi

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#14 lore raw
In reply to Takashi Iwai
Quoted 74 lines · Takashi Iwai

At Fri, 19 Aug 2005 18:06:41 -0600,

Quoted 70 lines · Philip Prindeville
Quoted 45 lines · Lee Revell
Quoted 33 lines · Philip Prindeville
Quoted 16 lines · Lee Revell
Quoted 9 lines · Philip Prindeville

nd_seq_device: disagrees about version of symbol snd_info_register
snd_seq_device: Unknown symbol snd_info_register
snd_seq_device: disagrees about version of symbol snd_info_create_module_entry

Quoted 11 lines

Did you make sure to remove the previous modules with rmmod before modprobe'ing the new ones?

Lee

Quoted 7 lines

Yessir.

Quoted 9 lines

Then I'm completely out of ideas. This is either a bug in the Fedora kernel, or a bug in ALSA.

Lee

Yup. I even pulled a fresh tree, too.

Say, there's another issue that I'm struggling with... I'm trying to get the makefiles to be a little more Fedora-friendly...

As they are, things like libdir and datadir aren't set correctly by default...

Not sure why the top-level Makefile has:

HOST = "$(ARCH)-suse-linux-gnu"

Quoted 9 lines
Quoted 5 lines

either...

Shouldn't that be passed in or discovered dynamically?

I can't find any HOST in Makefile...

Odd. I got the package via CVS, andthe Makefile is in the directory above alsa-driver, alsa-lib, etc.

-Philip

Quoted 4 lines

Takashi

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

#15 lore raw

At Mon, 22 Aug 2005 10:30:43 -0600,

Quoted 84 lines · Philip Prindeville
Quoted 81 lines · Takashi Iwai

At Fri, 19 Aug 2005 18:06:41 -0600,

Quoted 76 lines · Philip Prindeville
Quoted 46 lines · Lee Revell
Quoted 34 lines · Philip Prindeville
Quoted 17 lines · Lee Revell
Quoted 10 lines · Philip Prindeville

nd_seq_device: disagrees about version of symbol snd_info_register
snd_seq_device: Unknown symbol snd_info_register
snd_seq_device: disagrees about version of symbol snd_info_create_module_entry

Quoted 11 lines

Did you make sure to remove the previous modules with rmmod before modprobe'ing the new ones?

Lee

Quoted 7 lines

Yessir.

Quoted 9 lines

Then I'm completely out of ideas. This is either a bug in the Fedora kernel, or a bug in ALSA.

Lee

Yup. I even pulled a fresh tree, too.

Say, there's another issue that I'm struggling with... I'm trying to get the makefiles to be a little more Fedora-friendly...

As they are, things like libdir and datadir aren't set correctly by default...

Not sure why the top-level Makefile has:

HOST = "$(ARCH)-suse-linux-gnu"

either...

Shouldn't that be passed in or discovered dynamically?

Quoted 6 lines
Quoted 3 lines

I can't find any HOST in Makefile...

Odd. I got the package via CVS, andthe Makefile is in the directory above alsa-driver, alsa-lib, etc.

Of course, Makefile is in alsa-driver tree but the line you suggested above isn't found in alsa-driver/Makefile.

The line with host is found in Makefiles of other packages, but they are completely different things. They are based on automake while alsa-driver uses only autoconf and its home-made Makefile.

Takashi

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf