2.6.12.5: psmouse mouse detection doesn't work
Hi folks,
At boot time my Logitech mouse is detected as
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=event1 ts0 mouse0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
After manually reloading psmouse I get the expected
I: Bus=0011 Vendor=0002 Product=0002 Version=0049
N: Name="PS2++ Logitech Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=event1 ts0 mouse0
B: EV=7
B: KEY=f0000 0 0 0 0
B: REL=3
Using psmouse_noext=1 at boot time does not help.
How comes that this doesn't work on the first run?
I asked this more than a year ago, and somebody posted a fix, but obviously it wasn't accepted.
What needs to be done to fix this?
Regards
Harri
Quoted 20 lines · Harald Dunkel
At boot time my Logitech mouse is detected as
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=event1 ts0 mouse0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3After manually reloading psmouse I get the expected
I: Bus=0011 Vendor=0002 Product=0002 Version=0049
N: Name="PS2++ Logitech Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=event1 ts0 mouse0
B: EV=7
B: KEY=f0000 0 0 0 0
B: REL=3
Quoted 10 lines
Using psmouse_noext=1 at boot time does not help.
How comes that this doesn't work on the first run?
I asked this more than a year ago, and somebody posted a fix, but obviously it wasn't accepted.
What needs to be done to fix this?
Harri-
I was having problems with my psmouse also. Try the kernel boot option "usb-handoff", see if that helps. This is just a suggestion. I have nothing to do with the development of that driver.
Good Luck.
Signature · 1 line
Michael Krufky
Quoted 14 lines · Harald Dunkel
Hi folks,
At boot time my Logitech mouse is detected as
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=event1 ts0 mouse0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3After manually reloading psmouse I get the expected
Quoted 8 lines
I: Bus=0011 Vendor=0002 Product=0002 Version=0049
N: Name="PS2++ Logitech Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=event1 ts0 mouse0
B: EV=7
B: KEY=f0000 0 0 0 0
B: REL=3
Does booting with "usb-handoff" on the kernel boot line help?
Signature · 1 line
Dmitry
Quoted 22 lines · Harald Dunkel
Hi folks,
At boot time my Logitech mouse is detected as
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=event1 ts0 mouse0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3After manually reloading psmouse I get the expected
I: Bus=0011 Vendor=0002 Product=0002 Version=0049
N: Name="PS2++ Logitech Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=event1 ts0 mouse0
B: EV=7
B: KEY=f0000 0 0 0 0
B: REL=3
Quoted 8 lines
Using psmouse_noext=1 at boot time does not help.
How comes that this doesn't work on the first run?
I asked this more than a year ago, and somebody posted a fix, but obviously it wasn't accepted.
What needs to be done to fix this?
If psmouse is a module, you'd need to pass proto=bare as a module
parameter rather than on the kernel command line. Check modinfo psmouse.
Are you sure proto=imps hasn't found its way into/etc/modprobe.conf or so? I could imagine a distribution shipping this way.
--
Joseph Fannin
[email protected]
/* So there I am, in the middle of my `netfilter-is-wonderful'
talk in Sydney, and someone asks What happens if you try to enlarge a 64k packet here?'. I think I said something eloquent like fuck'. - RR */
Hi Mike,
Quoted 6 lines · Michael Krufky
Harri-
I was having problems with my psmouse also. Try the kernel boot option "usb-handoff", see if that helps. This is just a suggestion. I have nothing to do with the development of that driver.
It helps. Thanx very much
Harri