Skip to contentSkip to conversation

mpc8247 restart

DISCUSSION Mike Rapoport 1 participant 1 message Aug 22, 2005

lore
Share & tools
lore
#0 lore raw

Hi all,

I have a custom board based on mpc8247. I use u-boot-1.1.3 and linux 2.6.12.3. Each time there is some critical exception and the kernel tries to reset the machine, I get machine check exception instead of jumping to the u-boot code. What can be a reason of this?

The u-boot is in flash at offset 0x300000 from the flash start, the flash is mapped to 0xff800000 and I set the BOOTROM_RESTART_ADDR to 0xffb00110.

Signature · 2 lines
Sincerely yours,
Mike Rapoport