Skip to contentSkip to conversation

M-Audio Audiophile USB

DISCUSSION Pierre-Antoine Champin 2 participants 2 messages Aug 22, 2005

lore
Share & tools
lore
#0 lore raw

Hi alsa people,

I bought an M-Audio Audiophile USB external sound interface, but I have some problems to make it work properly: when recording audio, the signal I get is completely saturated. Googling around didn't help much, so my question is:

- to alsa-user: is anyone owning such a card and having it work? If so, what is your configuration?

- to alsa-devel: what is the known level of support for this card? if it is known to work 100%, what may I be doing wrong? if not, how may I help fix it (see below)?

I may have found the solution, though:
when I record a raw file with
arecord -D hw:3 -t raw -c 2 -r 48000 -f S24_3BE >foo.raw
and play it with the same option, I get the saturated sound, as I wrote. However, if I change the order of each 3-uple of bytes like that

    a,b,c -> c,a,b

and play the resulting file with the options above, it sounds good.

So I guess that the card has uses format S24_3BE for output, but *not* for input; it uses instead some hybrid format, for which the conversion to low endian would be:

    a,b,c -> b,a,c

Unfortunately, I'm not familiar enough with driver development to be able to fix it right away, so I prefer to submit it on the list first. I'm able to code, though, so with a few pointers, I may be able to do it. I'm just not sure which is the most time consuming for a knowledgeable developer: doing it or helping me into doing it ;)

thanks in advance

pA

PS: I'm using a Debian (testing) distriburion, with kernel 2.6.10 (I also tried with Agnula Demudi, based on 2.6.12)

#1 lore raw
Quoted 8 lines · Pierre-Antoine Champin

I bought an M-Audio Audiophile USB external sound interface, but I have some problems to make it work properly: when recording audio, the signal I get is completely saturated.
[...]
So I guess that the card has uses format S24_3BE for output, but *not* for input; it uses instead some hybrid format, for which the conversion to low endian would be:

    a,b,c -> b,a,c

The driver currently assumes that both playback and capture use big-endian samples. I haven't heard any complaints since this was implemented 21 months ago.

Does it work if you use plughw:3 and .wav files?

Regards,
Clemens

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf