irq 11: nobody cared
Hail,
I posted a report a while back, no answer.
Who should I be talking to wrt to the irq 11: nobody cared issue?
I'm happy to provide as much info as possible but need to know what info is required.
I'm happily running 2.6.7, tried the latest and greatest (2.6.12) and found the problem, then started by looking at 2.6.8 and found the problem there too.
It happens on boot, is a showstopper and I'm wondering what, if anything useful I can provide you guys.
Throw me a bone...
Nige
Quoted 5 lines · Nigel Rantor
Who should I be talking to wrt to the irq 11: nobody cared issue?
I'm happy to provide as much info as possible but need to know what info is required.
I'm happily running 2.6.7, tried the latest and greatest (2.6.12) and found the problem, then started by looking at 2.6.8 and found the problem there too.
Try 2.6.13-rc6 and if it still appears, try the new "irqpoll" boot option.
Daniel
Quoted 7 lines · Nigel Rantor
Hail,
I posted a report a while back, no answer.
Who should I be talking to wrt to the irq 11: nobody cared issue?
Quoted 7 lines
I'm happy to provide as much info as possible but need to know what info is required.
I'm happily running 2.6.7, tried the latest and greatest (2.6.12) and found the problem, then started by looking at 2.6.8 and found the problem there too.
It happens on boot, is a showstopper and I'm wondering what, if anything useful I can provide you guys.
Throw me a bone...
Read REPORTING-BUGS. We can't do much of anything with this report. Tell us what's on irq 11, for starters....
Jeff
Quoted 1 line · Jeff Garzik
Read REPORTING-BUGS. We can't do much of anything with this report. Tell us what's on irq 11, for starters....
Righto. While doing that I found that my udev is out of date for the 2.6.13-rc6 kernel.
Is there a chance that upgrading will kill my current 2.6.7-rc3 setup?
If not I'll go ahead and upgrade that and run some more tests before posting a full report.
n