RPXClassic Help

Greetings:

I got my hands on a couple of RPXClassic (CLLF) boards gratis and am planning on putting them to some use with my model railroad (overkill, but its fun!).

I have them running Das U-Boot git as of ~ 16August2005.

I'm attempting to use a kernel.org 2.4.30 kernel. (With i2c-2.9.0 patches)

After pushing the bd_t struct into rpxclassic.h, the board boots linux well, mounts the nfs root properly, things are good.

I would like to get a pcmcia flash disk working. It is id'ed by Das U-Boot:

PCMCIA:SunDisk SDP 5/3 0.6
Fixed Disk Card
IDE interface
[silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Bus 0: OK
Device 0: Model: SanDisk SDP3B-64 Firm: vdd 1.00 Ser#: g3vspq15924
Type: Removable Hard Disk
Capacity: 61.2 MB = 0.0 GB (125440 x 512)

After enabling pcmcia, 8xx pccard, ide, et al (and some debug printk's) I get the following output from the kernel:

Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx PCMCIA slot B: phys mem e0000000...e8010000 (size 08010000) Card ID: SunDisk SDP 5/3 0.6
Fixed Disk Card
IDE interface
[silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Probing IDE interface ide0...
probing for hda: present=0, media=32, probetype=ATA
do_probe 471
probing for hda: present=0, media=32, probetype=ATAPI
do_probe 471
probing for hdb: present=0, media=32, probetype=ATA
do_probe 471
probing for hdb: present=0, media=32, probetype=ATAPI
do_probe 471
Linux Kernel Card Services 3.1.22
options: none
m8xx_pcmcia: Version 0.05, 14-Apr-2002
m8xx_pcmcia: RPX CLASSIC or RPX LITE using SLOT_B with IRQ 13.

Nothing shows up in /proc/ide other than 'drivers' bash-2.05b# cat drivers
ide-disk version 1.17
ide-default version 0.9.newide

I tried googling to no avail. Any ideas?

TIA,

Travis