Skip to contentSkip to conversation

PPC440GX reset command doesn't work

U-Boot-Users Renaud Barbier 1 participant 1 message Sep 1, 2005

lore
Share & tools
lore
#0 lore raw

Just saw that old email. I am haveing the sme problem with my 440GX.

Have you found any clue of why a system reset does not work?

Quoted 50 lines · Andrew Wozniak
Quoted 13 lines · Andrew Wozniak

We have a custom PPC440GX board running a ported version of U-Boot based on the OCOTEA codebase. Most U-Boot commands are working - life is good.

Except for the 'reset' command. The do_reset() source code at cpu/ppc4xx/cpu.c appears to be the function for doing the reset via the PPC "debug control register". The PPC manual shows that a cpu reset is possible thru this register, but I'm a PPC assembly newbee and need to figure it out the macros in the cpu.c source code.

Just wondering if anyone else with a PPC440 target had any special modifications to make 'reset' work.

Ok, understand the assembly macro (except for the ::: "r3"). Must have something to do with do_reset args?

Anyway, it appears that a PPC "system reset" does not work as implemented via DBCR0 value 0x30000000.

If I change the value to 0x20000000 to do a "chip reset", the U-Boot 'reset' command works!

Is this an appropriate solution or might our hardware design have a flaw?

Thanks for all suggestions.

Quoted 3 lines

Thank you.

-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users